Application The pump is mainly used to deal with the convey of gas-bearing materials. So it is widely used in the occasions that the liquid level is instable,and the liquid level is lower than that of inlet to draw the material ,and also used as return in the CIP system .And it is the necessary convey equipment in the food,chemical ,pharmacy field. Functions and specifications The design adopt the side channel principle leading to the excellent suction,sanitariality ,low power ,lower noise ,easy to clean ,and low cost to maintenance . shaft sealing YUY sanitary priming pump seal is mechanical seal ,include the stationary ring SUS316L steel embedded in graphite structure ,and the movable ring made of silicon carbide . Material All the part contact with medium ,pump case.pump cover and impeller are made of AISI316L stainless steel . The part contact with medium:AISI316L stainless steel Other parts:AISI304 stainless steel The sealing contact with medium:EPDM Surface treatment The part contact with medium is polished ,and other part is glass painted or sand blasted treatment. Data sheet Max Inlet Pressure:0.5Mpa Temperature Range:-10¡ãC to +140¡ãC(EPDM) flushed mechanical seal: water pressure:Max0.1MPa water consumption:0.25-0.5L/min Motor I)According to the configuration ,we adapt three phase¡°ABB¡±brand AC motor. The motor design according to the International Electronic Commission IEC 60034.IEC60072,and comply with the EC requirements of ¡°CE¡±marking requirement . II).The explosion-proof motor also available ,that can meet with the requirement of different applications . III)It with excellent electric performance ,and with low noise,low vibration,the protection grade is IP55,insulation grade is F. Iv) The operate in voltage ¡Ü3Kw,220-240V/380-420V, 3Kw,380-420V/660-690V, v)Frequency 50Hz/60Hz VI)Operate way :Continuously VII)Running Speed : 2900r/min wood box.