Product Description
Aeroflex closed cell tube and Sheet Insulation is a flexible, closed cell and lightweight elastomeric material designed for insulating liquid cooling and heating lines. The closed cell structure of Aeroflex provides many advantages over most rigid insulations for cooling and heating lines, such as:
A: Moisture & vapor resistance without using additional vapor barriers.
B: Stable thermal conductivity (K. value) during service, due to its dense surface skins and closed cell characteristics.
C: Outstanding ultraviolet and weather resistance.
Aeroflex is an ideal insulation for frost control on cold water plumbing. It prevents heat gain and condensation problems on chilled water and refrigerant pipelines, and it also prevents heat loss from hot water plumbing, liquid and dual temperature piping.
Product Feature:
Aeroflex tubes and sheets insulate and prevent condensation when used in operating temperatures down to -57C(-70F) and insulate against heat loss up to125C (257F). Within these recommended operating temperatures, it will not affect the thermal efficiency and water vapor permeability of Aeroflex.
The Closed Cell structure protects against moisture, and eliminates the need for a vapor barrier in most applications. However, under severe condition of high humidity (90% RH up), high temperature (32¡æ up) and low ventilation such as underground piping, AEROCOAT(Acrylic Emulsion Paint) is recommended for use as additional vapor barrier coating.
Aeroflex insulation, made from high quality synthetic elastomers, has low density and closed cell structure. The products, therefore, have a stable low K Factor of 0.25-0.27 (at 50-90F mean temperature) which can save energy consumption on any heating and cooling lines.
Aeroflex tube and sheet insulation have been specially compounded to meet the ASTM Standard No. D 635, UL-94 V, JIS Standard No. K 6911 and other standards. The products have low smoke density while burning, and unlike other thermoplastic materials, Aeroflex will not melt nor drip flaming balls; therefore, it will not cause flame transfer.
The high elasticity of Aeroflex insulation minimize the vibrations and resonance of chilled water and hot water pipelines during operation.
The flexibility and smooth surface of Aeroflex offer neat-finished appearance even at joints, tees, elbows and crosses. No decorative or protective coating is required for both indoor and outdoor installations.
The flexibility of Aeroflex enables quick and easy installation bent or irregular piping. Due to its low and stable thermal conductivity, Aeroflex requires a thinner wall than other rigid insulations. Therefore, lesser space is needed for installation of Aerofle.
Application:
Aeroflex is an ideal insulation for frost control on cold water plumbing. It prevents heat gain and condensation problems on chilled water and refrigerant pipelines, and it also prevents heat loss from hot water plumbing, liquid and dual temperature piping.
Aeroflex closed cell tube and sheet insulation is flexible closed cell and lightweight elastomeric material designed for insulating liquid cooling and heating lines,the closed cell structure of Aeroflex provides many advantage over most rigid insulation for coolingand heating lines:
1. Moisture & vapor resistance whthout using additional vapor barriers
2. Temperature range:-57C~157C,Stable thermal conductity
3. Outstanding ultravoilet and weather resistance.
Class 0 Armaflex is flexible and closed cell ,elastomeric,nitrile rubber insulation that offer reliable protection against condensation and effectively prevents energy loss.Dust free and fiber free and CFC free with an ODP of zero.It inherent attributes and combination of properities makes Armaflex a highly efficient method of insulating hot and cold water services,chilled water lines ,heating systems air conditioning ductwork and refrigerated ,pipework for condensation control,energy conservation and frost protection.
1. Built in vapor barrier prevents condensation
2. Reduces energy losses by up to 87%
3. Excellent resistance to the effects of ozone,oil,chemicals
4. Lightweight and flexible, quick and easy installation with low maintenance.
Product Description
With its exceptional, inbuilt, water vapour barrier Armaflex is particularly effective at preventing moisture ingress and ensuring long term thermal efficiency. The thermal properties of Armaflex will not rapidly deteriorate over time as other insulation materials may and, by keeping moisture as far from the pipe surface as possible, Armaflex reduces the risk of expensive under insulation corrosion.
The in built water vapour of Armaflex comes from its closed cell structure. Armafl ex comprises thousands of interconnected closed cells, each with an inherent resistance to water ingress. As such the vapour barrier of Armaflex cannot be compromised by surface punctures or tears. In addition Armaflex is dust and fiber free. It will not emit any particles or fibers, even when cut into shapes and fittings.
Armaflex can be easily and cost effectively fabricated into valve and flange boxes on site, allowing for the protection of these vulnerable components and the creation of a fully sealed system at significantly reduced cost.
Product Feature:
* Mositure Resistance(10000)
* the product easy to install.
* excellent fireproof performance.
* Adiabatic engineering wall thickness
* In guarantee the effect of heat insulation and the best save the materials consumption
Product Specification/Models:
The complete Armaflex system family offer a secure and complete solution for all areas of application.
Application:
Class 1 Armaflex is the ideal insulation material for water pipe and air pipe of HVAC & Refrigeration systems, chiller and heating equipment£¬hot water pipeline and heat insulation in pipe work reduces the risk of under insulation corrosion.
Product Description:
Aeroflex Closed Cell Tube and Sheet Insulation is a flexible, closed cell and lightweight elastomeric material designed for insulating liquid cooling and heating lines. The closed cell structure of Aeroflex provides many advantages over most rigid insulations for cooling and heating lines, such as:
A: Moisture & vapor resistance without using additional vapor barriers.
B: Stable thermal conductivity (K. value) during service, due to its dense surface skins and closed cell characteristics.
C: Outstanding ultraviolet and weather resistance
Product Feature
* Standard sheet is avaiable in size of 36"*48"*(1/8"~2¡°)and 0.5m*0.2*(3mm~50mm).it prevents heat loss and condensation on large pipelindes, tanks, chillers, air duct, other irregular shaped vessl
* Low thermal conducutivity (K.value). eg.: Ë=0.032-20 Ë=0.0340 Ë=0.03940
* Stable thermal conductivity (K.value) during ervice,sue to its dense surfaceskins and closed cell characteristics.
* Heat stability(6% shrinkage ) 93 7days
* Moisture &vapor resistance without using additional vapor barrieris. Water vapor permeability within 0.10;Mositure resistance Ì>=10000;Water absorption <=5%
* Universal smoke and flammability proof standards; Class V0(UL-94);25/50 (ASTM E 84);Slef-extinguishing (ASTM D635);Class 1(GB 8424 B1);Class 5.3 (EMPA); Non-Flammable(JIS K6911);Pass (IMO).
* Outstanding ultraviolet and weather resistance,No crack (ASTM D 1171)
* Flexibility which makes installation work easy and neat,cell structure,density 0.048~0.096 g/cm;
* Sound reduction:27dB(20mm) [DIN52218]
* AEROFLEX can be safely handled without causing skin irritations and health hazard.
Product Specification/Models:
Aeroflex tubes and sheets insulate and prevent condensation when used in operating temperatures down to -57C(-70F) and insulate against heat loss up to125C (257F). Within these recommended operating temperatures, it will not affect the thermal efficiency and water vapor permeability of Aeroflex.
Application:
AEROFLEX is an ideal insulation for frost control on cold water plumbing. It prevents heat gain and condensation problems on chilled water and refrigerant pipelines, and it also prevents heat loss from hot water plumbing, liquid and dual temperature piping.
