Product Description
Aeroflex closed cell tube and Sheet Insulation is a flexible, closed cell and lightweight elastomeric material designed for insulating liquid cooling and heating lines. The closed cell structure of Aeroflex provides many advantages over most rigid insulations for cooling and heating lines, such as:
A: Moisture & vapor resistance without using additional vapor barriers.
B: Stable thermal conductivity (K. value) during service, due to its dense surface skins and closed cell characteristics.
C: Outstanding ultraviolet and weather resistance.
Aeroflex is an ideal insulation for frost control on cold water plumbing. It prevents heat gain and condensation problems on chilled water and refrigerant pipelines, and it also prevents heat loss from hot water plumbing, liquid and dual temperature piping.
Product Feature:
Aeroflex tubes and sheets insulate and prevent condensation when used in operating temperatures down to -57C(-70F) and insulate against heat loss up to125C (257F). Within these recommended operating temperatures, it will not affect the thermal efficiency and water vapor permeability of Aeroflex.
The Closed Cell structure protects against moisture, and eliminates the need for a vapor barrier in most applications. However, under severe condition of high humidity (90% RH up), high temperature (32¡æ up) and low ventilation such as underground piping, AEROCOAT(Acrylic Emulsion Paint) is recommended for use as additional vapor barrier coating.
Aeroflex insulation, made from high quality synthetic elastomers, has low density and closed cell structure. The products, therefore, have a stable low K Factor of 0.25-0.27 (at 50-90F mean temperature) which can save energy consumption on any heating and cooling lines.
Aeroflex tube and sheet insulation have been specially compounded to meet the ASTM Standard No. D 635, UL-94 V, JIS Standard No. K 6911 and other standards. The products have low smoke density while burning, and unlike other thermoplastic materials, Aeroflex will not melt nor drip flaming balls; therefore, it will not cause flame transfer.
The high elasticity of Aeroflex insulation minimize the vibrations and resonance of chilled water and hot water pipelines during operation.
The flexibility and smooth surface of Aeroflex offer neat-finished appearance even at joints, tees, elbows and crosses. No decorative or protective coating is required for both indoor and outdoor installations.
The flexibility of Aeroflex enables quick and easy installation bent or irregular piping. Due to its low and stable thermal conductivity, Aeroflex requires a thinner wall than other rigid insulations. Therefore, lesser space is needed for installation of Aerofle.
Application:
Aeroflex is an ideal insulation for frost control on cold water plumbing. It prevents heat gain and condensation problems on chilled water and refrigerant pipelines, and it also prevents heat loss from hot water plumbing, liquid and dual temperature piping.
Glazing glass is a combination of two or more pieces of glass spaced apart with a spacer bar and hermetically sealed with a primary and secondary sealant to form a single unit with one or more air spaces between each other. Max size :3300*12000mm Main character : Energy saving , improving the thermal performance Sound insulated Security and comfort Component : 1.� Glass items:� consists of hard or soft low E glass ,reflective glass ,clear glass ,tinted glass, with types of flat tempered ,bent ,laminated processing ,according to the application 2.� Spacer bar :is the material used to separate the two glass lites in an IGU. It can be made by aluminum,stainless steel,hybrid ,plastic material . The spacer width usually from 6mm-18mm.
"ISO" in the context of polyisocyanurate insulation typically refers to the insulation material's type or category rather than an acronym. Polyisocyanurate is a type of rigid foam insulation known for its high thermal resistance (R-value) and effectiveness in providing thermal insulation.
XPS Insulation (Extruded Polystyrene): "XPS" commonly refers to extruded polystyrene insulation. This type of insulation is known for its closed-cell structure, providing good thermal resistance and moisture resistance. It is often used in various construction applications, such as insulating walls, roofs, and foundations. B1 Fire Rating: The "B1" component might refer to a fire rating. In some fire classification systems, materials are rated based on their fire resistance, and "B1" could indicate a certain level of fire resistance. For example, in the European fire classification system (Euroclass), B1 represents a material with limited combustibility.
This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm Chemical Composition Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.
Insulated glass, often referred to as double glazing or double-pane glass, consists of two or more glass panes separated by a sealed air space or gas fill. This design enhances thermal insulation, reducing heat loss in the winter and heat gain in the summer. Insulated glass improves energy efficiency, minimizes condensation on windows, and enhances indoor comfort.
Product Description: Aeroflex Closed Cell Tube and Sheet Insulation is a flexible, closed cell and lightweight elastomeric material designed for insulating liquid cooling and heating lines. The closed cell structure of Aeroflex provides many advantages over most rigid insulations for cooling and heating lines, such as: A: Moisture & vapor resistance without using additional vapor barriers. B: Stable thermal conductivity (K. value) during service, due to its dense surface skins and closed cell characteristics. C: Outstanding ultraviolet and weather resistance Product Feature * Standard sheet is avaiable in size of 36"*48"*(1/8"~2¡°)and 0.5m*0.2*(3mm~50mm).it prevents heat loss and condensation on large pipelindes, tanks, chillers, air duct, other irregular shaped vessl * Low thermal conducutivity (K.value). eg.: Ë=0.032-20 Ë=0.0340 Ë=0.03940 * Stable thermal conductivity (K.value) during ervice,sue to its dense surfaceskins and closed cell characteristics. * Heat stability(6% shrinkage ) 93 7days * Moisture &vapor resistance without using additional vapor barrieris. Water vapor permeability within 0.10;Mositure resistance Ì>=10000;Water absorption
Pig Iron for sale at high quantities from India. Payment Term - LC For price and specification. This Pig Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. Dimension: 300mm -1000mm Chemical Composition Its chemical composition is homogeneous and stable with Fe contents in the range of 85 +/- 5% and P contents < 0.8% S around 0.15% and C% around 3.5%. Packing: Loose in container Loading: in 20 Container.
MOQ: 10,000 Barrels per Month Supply Ability: 1,000,000 Barrels per Month JP54 Technical Specifications: ADDITIVES Antioxidant in hydro processed fuel mg/l min 17 max 24 Antioxidant non hydro processed fuel mg/l max 24 Static dissipater first doping ASA- 3 mg/l max 1 Stadis 450 mg/l max 3 COMBUSTION PROPERTIES Specific energy, net mi/kg min 18.4 D 4808 Smoke point mm min 19 D 1322 Lumininomitter number min 45 D 1740 Naphtales % vol max 3 D 1840 Propriety unit min max result test ip method ASTM COMPOSITION Total acidity mg KOH /g max 0.01 354 D 3242 Aromatic % vol max 22.0 158 D 1318 Sulphur, total % mass max 0.30 107 D 1266/2622 Sulphur mercaptan % mass max 0.003 342 D 3227 Doctor test 30 D 4952 VOLATILITY Initial boiling point centigrade max report 123 D 96 10% vol at C 240 20% vol at C report 50% vol at C report 80% vol at C report End point centigrade max 42 170/303 D 56 / 3828 Density at 15 C kg m2 min /max 776/840 180/385 D 1298 LOW TEMPERATURES PROPERTIES freezing point centigrade max 40 15 D 1298 Corrosion copper (2hrs at 100 C) Corrosion silver (4 hrs at 500C) max 1 227 STABILITY Thermal stability control temp. 280C 323 Filter pressure, differential mm. Hg max 25 Tube deposit rating (visual) max
Introduction: - Feldspar is primarily used in industrial applications for its alumina and alkali content. Feldspar is a naturally occurring anhydrous, inorganic, igneous rock. The fusibility of the mineral makes it useful raw material for many applications and the purity is the indication of better fusibility in the application. There are two types of it depending On Na2O and K2O SODA FELDSPAR POTASH FELDSPAR Applications: - CERAMICS ENAMEL FRITZ & GLAZED INSULATORS GLASS MILD ABRASIVES PICTURE TUBES SANITARYWARE TABLEWARE VITRIFIED TILES WELDING ELECTRODE Available Mesh Size: - 100 - 500 MESH Custom sizes and Material of required specifications can be made in case of Bulk and Regular orders. TYPICAL CHEMICAL COMPOSITION OF POTASH FELDSPAR Index ompound Unit Result 1. Silica - (SiO2) % 66 - 68 2. Alumina - (AI2O3) % 17 - 18 3. Iron - (Fe2O3) % 0.03 - 0.06 4. Titanium - (TiO2) % 0.03 - 0.06 5. Calcium - (Cao) % 00.00 6. Magnesium - (MgO) % 00.00 7. Soda - (Na2O) % 2 - 3 8. Potash - (K2O) % 10 - 12 9. Loss on Ignition - (LOI) % 0.10 - 0.20 TYPICAL CHEMICAL COMPOSITION OF SODA FELDSPAR Index Compound Unit Result 1. Silica - (SiO2) % 68 - 72 2. Alumina - (AI2O3) % 17 - 18 3. Iron - (Fe2O3) % 0.10 - 0.15 4. Titanium - (TiO2) % 0.03 - 0.06 5. Calcium - (Cao) % 0.05 - 0.20 6. Magnesium - (MgO) % 0.10 - 0.15 7.Soda - (Na2O) % 9 - 10 8. Potash - (K2O) % 0.50 - 0.20 9. Loss on Ignition - (LOI) % 0.10 - 0.20
