Machine Series Features
• Drill depth of 1-20M
• Rack and pinion drive
• Precision ground hardened guideways
• Cast iron bed
• Geared headstocks for high torque applications
• Modern, efficient design.
Machine Configurations
• Rotating workpiece, stationary tool
• Rotating tool, counter-rotation workpiece
• Rotating tool, stationary workpiece.
Process
• BTA/STS solid drilling
• BTA/STS counter boring
• Trepanning
• Skiving and roller burnishing.
Machine Accessories
• Precision pressure heads
• Vibration dampener carriages
• Workholding chucks
• Workpiece roller steady
• Hinged belt chip conveyor
• Coolant chiller or heat exchanger.
Tooling Accessories
• Drill tubes
• Drill tube clamps
• Drill bushing systems
• Tube seal packing glands
• Vibration dampener cartridges.
Advanced Options
• Fanuc or Siemens CNC
• Lantern chuck for pull bore tooling
• X-axis actuator for bottle boring.
Customer Service
• Factory training for machine & tooling
• Foundation design & process planning
• Installation and startup
• Technical support via phone and internet machine connection.
Techincal information of ts2180 cnc deep hole boring machine
Drilling dia range : ö60-ö130mm
Boring dia range : ö80-ö800mm
Boring depth range : 1-16m depending on client requirement
Trepanning hole dia : ö140- ö400mm
Spindle center height : 1000mm
Headstock spindle dia : ö100mm
Front spindle taper hole : ö120mm, 1:20
Spindle speed range , steps : 1--200r/min three shift
Mian motor : 55kw dc motor
Feeding speed range : 5--500mm/min stepless speed adusting
Dia range of workpiece : ö270--ö1000mm
Spindle hole of drilling pole box : ö120mm
Front taper hole of drilling pole box spindle : ö140mm, 1:20.
Drilling bar box motor : 45kw
Drilling pole box speed range and steps : 16--270r/min 12 steps
Feeding motor : 7.5kw
Cooling motor : 11kwx4
Hydraulic motor : 1.5kw, n=1440r/min
Rated pressure of cooling system : 2.5mpa
Cooling system rate : 200, 400, 600, 800l/min
Machine bearing : 25t--35t.
Wooden packing.
On the double flat guide way, it equipped the rolling linear guide way. So it has high move precision and high abrasion proof. The bed is also the cooling box, so it is strengthen the stability of bed and reduce the shake. It equipped the Germany SIEMENS 802D CNC system (or appoint by customer). It is AC motor for the headstock, tow grade and stepless. The bearing of spindle is high precision FAG bearing and it is strong in rigidity and high precision in rotating. The feeding box adopts AC servo motor, stepless, and it is equipped with high precision ball screw. It adopts the hydraulic elements which is stable in capability made in Taiwan (or appointed by customer). It adopt scraps discharging by spindle, it equipped automatic discharge scrap equipment and it is not leak. It can also equipped high efficiency automatic expand-draw back combined tools. It is an ideal machine for deephole processing with high precision and efficiency.
Technical information of TS2110 deep hole boring machine
boring Dia range: 20-100mm
Drilling Dia range :20-40mm
Max boring depth : 0.6,1m,1.5m,2m,2.5m,3m
Headstock spindle hole Dia:100mm
spindle rotation speed ,steps: 2-90r/min
feeding speed 10-300mm/min AC servo stepless
carriage rapid moving speed:2m/min
clamping Dia of workpiece: 30-200mm
rated pressure of cooling system:2.5Mpa
volume of cooling system: 100,200,300l/min
main motor: N=11kW
feeding motor:3kw AC servo
coolant pump motor:5.5KW x5(3groups)
rated pressure of hydraulic system : 6.3MPa.
Wooden packing.
CNC Deephole Drilling & Boring Machine is suitable for the drilling, boring and rolling processing of all kinds hydraulic oil cylinder, cylinder and other precision tube fittings, especially for the precision processing of step holes. The hole diameter accuracy of machined workpiece can be up to and over IT7~IT8, and the surface roughness reach Ra0.2~0.3 m. The bed adopts welding steel so that it is strong in rigidity. On the double flat guide way, it equipped the rolling linear guide way. So it has high move precision and high abrasion proof. The bed is also the cooling box, so it is strengthen the stability of bed and reduce the shake. It equipped the Germany SIEMENS 802D CNC system (or appoint by customer). It is AC motor for the headstock, tow grade and stepless. The bearing of spindle is high precision FAG bearing and it is strong in rigidity and high precision in rotating. The feeding box adopts AC servo motor, stepless, and it is equipped with high precision ball screw. It adopts the hydraulic elements which is stable in capability made in Taiwan (or appointed by customer). It adopt scraps discharging by spindle, it equipped automatic discharge scrap equipment and it is not leak. It can also equipped high efficiency automatic expand-draw back combined tools. It is an ideal machine for deephole processing with high precision and efficiency.
Tsq 2180 CNC deep hole boring machine
Range of drilling hole dia : 40- 100mm
Range of boring hole dia : 40- 800mm
Sleelve boring hole dia : 140- 400mm
Max boring depth : 3-12m one sepcification every each one meter
Center height from horizental rail to spindle center : 1000mm
Headstock spindle hole dia : 100mm
Front spindle taper hole : 120mm, 1:20
Spindle rotation speed , steps : 16-270r/min 12steps
Main motor : 45kw
Feeding speed : 5-500mm/min ac servo stepless
Carriage rapid moving speed : 2m/min
Clamping dia of workpiece : 120-800mm
Drilling bar box spindle hole dia : 75mm
Front spindle taper hole of drilling bar box : 85mm, 1:20.
Drilling bar box motor : 30kw
Spindle rotation speed , steps of drilling bar box : 82-490r/min 6steps
Feeding motor : 7.5kw ac servo stepless
Pulling plate fast motor : 5.5kw
Cooling pump motor : 5.5kwx4 4groups
Hydraulic pump motor : 1.5kw, n=1440r/min
Rated pressure of cooling system : 2.5mpa
Volume of cooling system : 100, 200, 300, 600, 900l/min.
Wooden packing.
