poxy resin glue is epoxy fiber adhesive of high performance, can be used for the effective penetration bonding between many substrate materials, such as concrete, steel material, ceramic, stone, wood component and many fiber plate such as carbon fiber plate, basalt fiber plate, glass fiber plate etc. It is mainly used for the strengthening and reinforcement of buildings, bridge and civil construction. Classification: Double components adhesive Mixing Ratio: 2:1 (A:B) Viscosity: 4000-6000 Pa.s Appearance: Viscous Liquid Color: White & Black Uses: Construction, Fiber & Garment, Footwear & Leather, Packing, on concrete substance etc.
Low viscosity, with the mixing ratio of 100:33 by weight, will be cured at about 10hours in room temperature. 5kgs per bottle, 4bottles per carton
Viscosity: A=4000-8000CPS B=50CPS Mixing Ratio: 100o33weight ratio) Curing Time: 8 hours in room temperature Advantage: Very high gloss; hard and durable; eco-friendly and no odor 5kgs per bottle, 20kgs per carton
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Epoxy Resin
Supplier: Epoxy resin, deformer, additives, epoxy resin adhesive
Supplier: Epoxy resin adhesive , uv glue, threadlocker sealant
High Performance 2 component solvent-free, water cleanable, antifungal and anti-bacterial epoxy resin based adhesive and grouting system, which provides excellent adhesion and chemical resistance in medium and heavy duty corrosive and hygienic environments.
DB118 This product is a one-component epoxy resin adhesive with high thermal conductivity, which is the best matching adhesive for thermal bonding of chips. Applicable to all kinds of electronic products, characterized by rapid thermal curing, and easy to apply. Upon cure, it has high bonding strength, good thermal conductivity, low shrinkage, low moisture absorption, good insulation performance, etc., which can reduce the working temperature of the chip, extend the life of the chip
