Application:Application ? air conditioners, refrigerators, freezers, water heaters, water dispensers, heaters, dishwashers, disinfection cabinet, washing machines, dryers and other appliances on. ? car air conditioners, water temperature sensor, intake air temperature sensor, engine ? Switching power supply, UPS uninterruptible power supply, inverter, electric boilers, etc. ? smart toilet, electric blankets, etc. The Product Sells Point: Key Specifications/Special Features: A: Size chart MF52 NTC with epoxy to lead Note: The size and wire color according to customer requirements! II: Product Features: 1: MF52 series of products for the lead with an epoxy coating type 2: Wide range of resistance: 0.1KO ~ 500KO 3: Resistance and B value of high accuracy 4: moisture proof, good insulation, high reliability, small time constant 5: small, reflecting the speed 6: is stable for a long time, consistency 7: Operating temperature range: -40 ~ 125 ? 3: Product Applications: Air-conditioning equipment, heating equipment, medical equipment, temperature control instrumentation, electronic gifts, electronic hygrometer, car thermometer, electronic calendar, rechargeable battery pack and charger, laptop batteries. Four: Model Description MF 52 103 F 3950 ? ? ? ? ? ?MF ¬-- negative temperature coefficient (NTC) thermistor Code. ?52-- epoxy encapsulated NTC thermistor temperature sensor. ?103 - thermistor nominal resistance, indicating that the nominal resistance of the resistance: 10 × 103 (O). Error ?F-- resistance value (accuracy) is: F = ± 1%, G = ± 2%, H = ± 3%, J = ± 5% ?3950-- thermal resistance index (material factor) B is: 395 × 10 (K) Five: MF52 Series Model Specification Note: according to customer requirements, provide different resistance, B value precision, customization. NTC thermistor measurements must note the following: • can not be measured in the air, the larger the difference in air temperature measurement inaccurate, resulting accuracy deviation. • After using the high-precision measurements of the bath, measured after NTC into the bath, the bath temperature must be stable before measurement. • Measure the voltage as low as possible in order to reduce measurement errors due to self-heating NTC. • High temperature measurement, required temperature bath thermometer correction, check
Temperature sensor series generally apply in engineering, electronics industry, as well as use in the biochemical, technology, automobile and medical system. Oem/odm and provide customers with customization options.
Epoxy Coated NTC Thermistor 30K 3950 Temperature Probe Chip For Auto Wire Harness I Selection Of The Epoxy Coated NTC Thermistor 30K 3950 Temperature Probe Chip Modifications are available to existing standard product packages, such as adding connectors or changing wire size or length, as well as offering special resistance-temperature (R-T) curves, R-T curve matching, and custom lead forming and bending to discrete thermistors. In addition, the following options and services are available. Complete custom sensor packages, including moisture resistant designs Custom resistance-temperature (R-T) characteristics Specialized resistance tolerance or temperature accuracy within specified temperature ranges Sensing element design for best long-term stability Rapid prototyping and quick-turn concept parts including 3D printed parts Prototype units using prototype tooling Reliability/validation testing options Fully designed, production-capable sensor and tooling III Material Lists Of The Epoxy Coated NTC Thermistor 30K 3950 Temperature Probe Chip NO Material Name Item/PN 2-1. Element R25=30K±10% B25/50=3950±1% 2-2. Coating Epoxy Resin (Black) 2-3. Lead Wire UL4411# 24AWG 2C 7*0.20mm 125 300V (Yellow) Diameter:1.4±0.05 * 2.9±0.1mm Meet SAEJ-1128 IV Electrical Performance Of The Epoxy Coated NTC Thermistor 30K 3950 Temperature Probe Chip NO Item Sign Test Conditions Min. Normal value Max. Unit 4-1. Resistance at 25 R25 Ta=25±0.05 PT 0.1mw 27.0 30.0 33.0 k 4-2. B Value B25/50 3910.5 3950 3989.5 k 4-3. Dissipation factor Ta=25±0.5 In still air 2 mw/ 4-4. Time constant Ta=25±0.5 In still air 7 sec 4-5. Operating temp.range / / -20 / +125 4-6 Insulation resistance / 100V DC 100 / / M 4-7. Withstand voltage test / 200V AC 5 / / Sec
Stainless Steel Housing Temperature Sensor Chip NTC Thermistor 50K 1% 3950 100MM I Description Of The Stainless Steel Housing Temperature Sensor Chip NTC Thermistor Ampfort offers Stainless probe assemblies suitable for a wide range of temperature sensing applications. If the dimensions and electrical characteristics on this product wonot work for your requirements, please contact us for further assistance. 1.Temperature probe features XH2.54-2P connector and 15.7 inch (40cm) in length. 2.Mainly used in air conditioner for monitoring temperature, has quick reaction speed. 3.Application : thermostatic controls, industrial systems, consumer products, thermometers, any thermally sensitive system. II Features Of The Stainless Steel Housing Temperature Sensor Chip NTC Thermistor Tight Tolerance Moisture Resistant PVC Insulated Zip Cord 105�°C Max Operating Temperature Food grade stainless steel housing Custom and standard machined metal housings available in brass, stainless steel, aluminum, and exotic alloys Global engineering support for custom design solutions UL rated assemblies mateirals for HVACR applications IV Materials information Of The Stainless Steel Housing Temperature Sensor Chip NTC Thermistor NO Material Name Item/PN Origin 2-1. Lead wire UL2651#26AWG*2C 105 300V White KL 2-2. Thermistor R25=50K±1% B25/50=3950K±1% MF58 SH 2-3. Epoxy Resin J105/J106B/J05X Black DB 2-4 Shell 5.0*25 Round Head Stainless steel shell XDL VIII Thermistor Thermistors are a type of resistor that acts as a temperature-sensing element, generally made of ceramic or polymer. Thermistors exhibit a large change in resistance proportional to a small change in temperature. Thermistors come in two common types: NTC (Negative Temperature Coefficient) thermistors In these thermistors resistance decreases as temperature rises. An NTC is commonly used as a temperature sensor, or in series with a circuit as an inrush current limiter. PTC (Positive Temperature Coefficient) thermistors â?? In these thermistors resistance increases as temperature rises. PTC thermistors are commonly installed in series with a circuit, and used to protect against overcurrent conditions, as resettable fuses.
Supplier: SMD type, NTC thermistor, temperature sensor series
Services: OEM & ODM services
Supplier: Ntc Thermistor And Temperature Sensors
Buyer: Automatic Machine
Smd type and negative temperature co-efficient(n.T.C.) thermistors. Generally practice in engineering and electronics industry field, as well as apply in biochemical, technology, automobile and medical system. We can do oem and odm or customize for any type of custimer and recommand the suitable products for them.
Supplier: NTC thermistor, temperature sensor, medical temperature probe, oxygen sensor
1.Fast response , high sensitive. 2.Glass sealing, able to stand for low temperature 3.Coaxial structure makes it easy to install and can stand for high temperature R value :10k--5000k B value :3950, 3899, 4020, 4050, 4200, etc. Precisionú¦+/-1%--+/-10%
