Hefei Sensing Electronics Co., Ltd.

Non-Sterile Medical Examination Nitrile Gloves Powder free & Latex free 100% Virgin raw materials with FDA certificate & as per ASTM D6319/ CE EN 455 Quality standard: ASTM D6319, with 510K and FDA, CE/EN455, Color: Blue, white Finger Tips: textured Cuff: Beaded Pcs per Box for S/M/L/XL : 100pcs/box Origin: China, Vietnam, Thailand, Malaysia Benefits Protection from unwanted and harmful substances Beaded Cuff ensures easy donning and prevent roll down Superior Strength with better Puncture resistance Finger Tip Textured enhances wet and dry grip Thinner Guage improves tactile senstivity Custom Design enhances comfort and fit Provide an Alternate Solution for individual who are allergic to natural rubber latex Material : Synthetic Nitrile Type : Non-Sterile Powder Free, Amibidextrous, Finger Tip Textured, beaded cuff. Storage: Store in a dry and cool place, the temperature not higher than 38�° C Shelf life: 2 years Physical Properties Tensile Strength: Before Aging 14Mpa min Tensile Strength: After Aging 14Mpa min Elongation at Break (%): Before aging 500% min Elongation at Break (%): After aging 400% min Length: 230 mm in XS, S, M, L, XL Width: 70+/- 10 (XS) Width: 80+/- 10 (S) Width: 95+/- 10 (M) Width: 110+/- 10 (L) Width: 120+/- 10 (XL) Thickness Single wall ( mm): Fingers 0.050mm min Thickness Single wall ( mm): Palm 0.050mm min

Application:Application ? air conditioners, refrigerators, freezers, water heaters, water dispensers, heaters, dishwashers, disinfection cabinet, washing machines, dryers and other appliances on. ? car air conditioners, water temperature sensor, intake air temperature sensor, engine ? Switching power supply, UPS uninterruptible power supply, inverter, electric boilers, etc. ? smart toilet, electric blankets, etc. The Product Sells Point: Key Specifications/Special Features: A: Size chart MF52 NTC with epoxy to lead Note: The size and wire color according to customer requirements! II: Product Features: 1: MF52 series of products for the lead with an epoxy coating type 2: Wide range of resistance: 0.1KO ~ 500KO 3: Resistance and B value of high accuracy 4: moisture proof, good insulation, high reliability, small time constant 5: small, reflecting the speed 6: is stable for a long time, consistency 7: Operating temperature range: -40 ~ 125 ? 3: Product Applications: Air-conditioning equipment, heating equipment, medical equipment, temperature control instrumentation, electronic gifts, electronic hygrometer, car thermometer, electronic calendar, rechargeable battery pack and charger, laptop batteries. Four: Model Description MF 52 103 F 3950 ? ? ? ? ? ?MF ¬-- negative temperature coefficient (NTC) thermistor Code. ?52-- epoxy encapsulated NTC thermistor temperature sensor. ?103 - thermistor nominal resistance, indicating that the nominal resistance of the resistance: 10 × 103 (O). Error ?F-- resistance value (accuracy) is: F = ± 1%, G = ± 2%, H = ± 3%, J = ± 5% ?3950-- thermal resistance index (material factor) B is: 395 × 10 (K) Five: MF52 Series Model Specification Note: according to customer requirements, provide different resistance, B value precision, customization. NTC thermistor measurements must note the following: • can not be measured in the air, the larger the difference in air temperature measurement inaccurate, resulting accuracy deviation. • After using the high-precision measurements of the bath, measured after NTC into the bath, the bath temperature must be stable before measurement. • Measure the voltage as low as possible in order to reduce measurement errors due to self-heating NTC. • High temperature measurement, required temperature bath thermometer correction, check