Supplier: Electrical material (industrial): acoustic and luminous warnings, automatisms and burglar-proof alarms.
The Notifier NBG-12 Series Pull Station is a fire alarm initiation device that allows manual activation of the fire alarm system. It typically consists of a red or yellow manual-pull handle or lever, which when activated, sends a signal to the fire alarm control panel to initiate an alarm. The NBG-12 series is designed for use in fire alarm systems and is commonly used in commercial, industrial, and residential buildings. The product is known for its durability and reliability, and it meets industry standards for fire alarm systems.
RP-2001 is a UL listed six-zone fire alarm control panel for single and dual hazard deluge and preaction applications, providing fire detection, signaling and protection for commercial, industrial and institutional buildings requiring water-based releasing.! Features & Benefits: 1. Designed for sprinkler standards NFPA 13, 15 and 16. 2. Dual hazard operation. 3. Cross-zone (double-interlock) capability. 4. Six programmable Style B (Class B) IDCs (Initiating Device Circuit). 5. Optional Digital Alarm Communicators
RP-2002 is a UL listed six-zone fire alarm control panel for single and dual hazard agent releasing applications, providing fire detection, signaling and protection for commercial, industrial and institutional buildings requiring agent-based releasing. Features & Benefits: Disable/Enable control per input zone and output zone. Extensive transient protection. Dual hazard operation Meets International Building Code (IBC) seismic requirements
1. Built-in GSM industrial module, easy installation and configuration 2. 3 wired zones and 6 wireless zones, each zone can be set as the Bypassing, Burglary or Emergency zone 3. Remotely program the function of the control panel by SMS or phone 4. Can Arm,Disarm by SMS or phone 5. Edit the name of zone by SMS,when alarm,SMS report the alarm information. 6. Real-time, Delay, 24 hours, Bypass defense zones program 7. Short message reporting of AC power failure and power and phone lines fault 8. With the operation password,make sure the safty. 9. 8 seconds pre-recorded alarm message that will be played when alarming 10. 4 pre-set telephone numbers to dial and 4 pre-set telephone numbers to send SMS 11. Automatic switch of AC power and backup batteries. One set by one clore box, 20boxes by one carton.
Intelligent home security and safety system GSM Wireless Security Burglar/Intruder Alarm System Description: Our GSM burglarproof alarm system which have GSM network protection, short message sending function. DIY, Customize, easy-to-use and install! It is the updated advanced GSM prepaid module made by Shenzhen AnBoShi Electronic Technology CO., LTD. It features eleven different wireless protection zones, two wired protection zones, partial disarmed, remote telephone control, remote electricity control, etc. Compatible with CCTV surveillance and centre monitoring system. 1. Wireless type, easy to install, without phone line. 2. Remote control, convenient. 3. Password protected 4. SMS to enable arm/disarm, partial arm/disarm, siren 5. High siren volume so to scare away intruders 6. SMS and auto dial up three phone numbers, locale monitoring start on. 7. SMS to recheck the GSM panel status, alarm report, zone name, arm/disarm status. 8. Audible/mute siren programmed 9. Panic help 10. AC power shutoff self-detected to avoid malice destroyed, automatically switch to battery back-up 11. Enable to setup alarm receiving central through GSM network. Specification: 1. Protection zone: Wire: 2 Wireless: 8 2. GSM band: EGSM900/DCS 1800/PCS 1900MHZ TX RX EGSM 880~915MHz 925~960MHz DCS 1710~1785MHz 1805~1880MHz PCS 1850~1910MHz 1930~1990MHz It can save six alarm telephone number and separately set SMS function or telephone alarm. Transmitting power consumption: 1W 3. LED indicators: 8 4. Low power protected time:
Burglar alarm active 504 Eight zones with lcd display built in auto dialer 8 zones Instant arming 20 passwords Micro controller based Daily alert Wire cut detection indicator siren 0 to 240 sec delay time setting through programming Rs-485 connectivity Individual activation / deactivation for all zones Access control interface Convenient to fit your operating system anywhere Auto dialing facilities with 10 noµs memory, one minute recorder message storage Built in external voice alarm Inbuilt extended hours battery backup with automatic recharging circuit. Fit on any wall with simple screwing (tamper proof)
Supplier: Fire alarm equipments, fire fighting equipments
Services: Security systems, safety systems
Description and Main functions: 1. Support GSM 850/900/1800/1900MHZ. 2. With infrared night vision camera. 3. Automatically send alarm SMS,MMS,E-mails and support two-way communication while alarming. 4. Automatically send on-site pictures when alarming or remotely request to take pictures at any time. 5. Remotely control alarm host by SMS or phone button. 6. Support burglar alarm,fire alarm,and SOS alarm. 7. With external AC power failure alarm function. 8. Build-in backup lithium battery.(800MAH) Packaging Includes: One alarm host (main unit) One remote controller 2G SD Card One Power adapter One English Manual. The main specification of mainframe Power adapter: input 100V240V/50/60Hz output DC12V GSM Working frequency: 850/1900/900/1800MHz Wireless receiving frequency: 315MHz/433 MHz Communication mode: GSM/GPRS Wireless detectors allowed quantity: unlimited Wired guarding zone: Two Image resolution: 640*480,320*240 Image format: JPEG Memory card: 2GB Camera resolution: 30 million pixels Built-in lithium battery: 800mAh Battery standby time: 12hours Operating temperature: -10 to +45 Storage Temperature: -20+60 Humidity: 10-90% No-condensing Dimensions: 150L*71W*70H (mm). Prices(FOB Shen Zhen): MOQ" 10PCS Price(USD) Sample: FOB Shenzhen $120 5to 50sets :$116 51to 200 sets:$113. Dimensions: 150L*71W*70H (mm) Weight:1.5KG.
