The FC-A Float Collar is run in a casing assembly, usually several joints above the Float Shoe. It serves as an extra back pressure valve sealing against pressures from blow while running the assembly and after the cementing job. Internal latch and valve are readily drillable. Its capability of back-pressure is over 25MPa. Like the FC-A Float Collar, the FS-A float shoe also has a back-pressure valve to prevent back flow. It permits cement to run through side ports when the nose of the shoe is on the bottom. Inner valve and bottom guides are all made of drillable material. Its capability of back-pressure is over 25MPa. Please contact us if you have any inquiry. Wooden case
Casing centralizer Wooden case
Our tubing anchor is a simple, convenient, reliable tool designed to anchor and drainage oil. Being used, it is able to decrease stroke loss and raise pump efficiency. Wooden case
Our packer is a hydraulic set, bi-directional slip anchored and up strain unset tool, which consists of packer sealing part, locking part, setting part, anchoring part and unsetting part. wooden case
Liner hanger Wooden case
Supplier: Rice, cotton yarn, fresh fruits, dry fruits & nuts, fresh vegetables, honey, leather products, leather shoes, leather belts, leather gloves, surgical gloves, solar led street lights, petroleum by products, herbs, solar lights, light emitting diode, knitted & woven garments, street lights & lamps, made ups, energy saving lights & lamps, pink salt, himalayan salt, rock salt, salt, leather bags
Services: Trading services.
Float collars and float shoe The float collars and float shoe are used to guide the casing to be put into the hole. It can adjust the floating power of the casing when the casing been laid in. That can certify the qualification of the cementing. The float collars and float shoe manufactured by our company use the spring driving back-pressure valve type. It has a high reliability. The structures are similar between float collar and float shoe. The lower end of the float collar is the pin connection which is connected with the casing. The upper end which is used for filling the cement has acinqfoil hole which can avoid the twist. The material of the float shoe body is the alloy steel . The upper end of the float shoe is connected with casing and its lower end is connected with the semilunar cement head. You can use the guide casing to lead it into the drilling hole. There is a back-pressure valve in the float shoe. You can use the oil well cement to fill the area between the float shoe and the body. The back-pressure can be cut by back-pressure valve. The upper hole and the lower hole will be open when the products after done . After the pressure of the circulating mud press the valve head into the lower place, the three collar valve on the valve tail will fall down automatically. The valve will press the valve seat tightly at the function of spring after the cement injection. And it will as a one-way valve function in the working. At that time, you could inject the mud into the pump from the upper end to the lower end, but the liquid of the well won`t be back in the casing below the valve or the outside circulation area of the casing.
We are a manufacturer and of cementing tools since 1997, and now we have almost 400 workers, the products cover cable protector, thread protector, cementing head/plug, stage collar, float equipment, liner hanger, centralizer, stop collar and so on.
Supplier: Petroleum equipment, such as tubing anchor, torque anchor, packer, centralizer, sucker rod guide, downhole gas separator, couplings
