Ruian Lihai Voiture Parts Co., Ltd

SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".

AC to DC converter battery charger 150-1000VDC rectifier 120KW power supply Product Introductionï¼? SANDI AC/DC Charger is specially developed for DC chargers. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase, DC output voltage range from 150 to 1000VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger. Unique function High efficiency over the full load range, full load efficiency greater than 95% Wide output voltage range, 150-1000VDC, suitable for a wide range of Lithium or lead acid battery 5-inch LCD touch screen, easy to operate Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate Main featuresï¼? Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc. Wide input voltage range: 260~ 530Vac, adaptable to various power grid environments Three-phase AC input without neutral wire: Simplifies system design, eliminates the risk of excessive neutral current, and reduces system costs. Dual DSP design, achieve the full digital control, less components means high reliability Wide input voltage range, allows operation in most poor grid conditions Battery anti backflow: effectively protects the battery while ensuring reliable and safe operation of the system Input, output have protective circuit breaker switch Module adopts hot pluggable design, which is convenient for maintenance. RS485 interface (Optional)

The Variable Speed Drive FRENIC series is equipped with functions and performance to meet all types of requirements, and in addition it is easily maintained and environmentally friendly. The series lineup ranges from simple to advanced-function models, enabling model choices matching situations for use. Fuji Electric provide Variable Speed Drives perfect for automating and with energy saving devices like a fan pump or carrier and variable speeds.

We have good quality Used and New Laptops of all brands. Product Name Used laptops Processor CPU Series: Intel Core i7 4-generation family CPU Type: Intel Core i7 4702MQ CPU frequency: 2.2GHz Core frequency: 3200MHz Bus Specifications: DMI 5 GT / s Three cache: 6MB Core Architecture: Haswell Core / thread count: quad-core / eight thread Storage Device Memory Capacity: 4GB (4GB Ã?? 1) Memory Type: DDR3L (low voltage version) 1600MHz Hard disk capacity: 500GB Hard Description: Support the expansion turn mSATA SSD hard drive Drive Type: No built-in optical drive Display Touch screen: does not support touch Screen Size: 14 inches Aspect Ratio: 16:9 Screen Resolution: 1366x768 Screen technology: LED backlit, matte glare mask Graphics Graphics Type: Dual Graphics (fever-level graphics card + integrated graphics) Graphics chip: NVIDIA GeForce GTX 760M + Intel GMA HD 4400 Memory Capacity: 2GB Memory Type: GDDR5 Memory Interface: 128bit Number of stream processors: 768 Multimedia devices Camera: 720p HD webcam Audio System: Built-in audio chip Speaker: Built-in speaker Microphone: Built-in microphone Network Communications Wireless LAN: 802.11b/g/n wireless protocol Wired LAN: 100Mbps Ethernet card I / O interfaces Data interface: 1 Ã?? USB2.0 +2 Ã?? USB3.0 Video Interface: VGA, HDMI Audio interface: headphone / microphone combo interface Other interfaces: RJ45 (network interface), power connector Reader: Multi-in-1 card reader Input Devices Pointing device: Touchpad Keyboard Description: Full-size keyboard Power Description Battery: 6-cell lithium battery, 5900 mA Life time: 5 hours, the specific time depending on use environment Power adapter: 100V-240V 90W AC power adapter adaptive Exterior Laptop Weight: 2Kg Length: 339.2mm Width: 239.5mm Thickness: 26.4mm Shell material: composite material Case Description: Black Notebook accessories Packing list: Host x1 notebook Power adapter x1 Power cord x1 Manual x1 Warranty card x1 Shipping DOCS 1. Commercial Invoice 2. Packing list 3. Certificate of Origin 4. Bill of Loading 5. Form A/Form E 6. Other documents are according to customer's

Photocells Fans & ventilation, Hazardous area lighting Industrial plugs & sockets Industrial & commercial Lamps Light fittings: fluorescent, weatherproof & floodlighting Refrigeration & air conditioning spares Water heating elements Wiring accessories MCB's Circuit breaker Vacuum Breakers Control transformers Fuses & load break devices Hazardous area products Industrial beacons Industrial sounders, buzzers Industrial surge protection Safety switches Clamp meters Multi-meters Testers Semiconductors: thyristors, rectifiers Pressure switches Solenoid & pilot valves Photoelectric Sensors

Variable frequency drives Motors Motor controllers Pulleys Belts Bushes

1. A Comfortable Contoured Shape - DIY Magnetic Detachable Up Cover Maximum comfort, the mouse is equipped with two interchangeable panels â?? one a honeycomb shell that makes the mouse lighter - and the other solid non-perforated. 2. Light Speed Pro-grade wireless 2.4Ghz A pro-grade wireless solution that achieves wired-like performance, built-in USB Nano receiver 3. 1:1 Tracking Advanced Sensor Battle with an ultra-accurate and high-speed tracking engine, 6 Active and Adjustable Up to Maximum DPI 4. Dynamic Multicolor RGB Backlighting Full-spectrum, fully-customizable RGB, select your own personal RGB matching with your gameplay 5. Rechargeable Battery Built in 600mA Rechargeable Battery - Charging time 3 hours - Working time Up to 70 hours 6. Ultra Speed scroll wheel - Rubber Sillicon Premium Rubber Sillicon Scroll make you Scroll better and get more done. 7. All New High-Performance Switches " HUANO 50 million keystroke 2 Keys R/L " Made for gaming left/right and 2X button switches provide ultrafast response 8. Dual High Quality Connection " 2.4Ghz USB Nano Receiver + Wired USB Type C Cable 2.0 " USB Nano Receiver Working as wireless + USB C Cable Working as Wired Mouse - Rate of return: 1000HZ 9. Packing & Contents B Color box Packing + User Manual 2 Page + USB Nano Receiver + USB Type C Cable Data cable length: 180cm / Product size:124.90 * 63.70 * 40.50mm / Product Weight: 95g