Wgqh series of high voltage solid soft starter
Performance characteristics
The device combines series & parallel thyristor, professional insulating material imported with original packing and modern power & electric control technology, which is applicable to large and medium high voltage soft starting equipments with motor.
Starter and Alternator and their child parts for Commercial Vehicles and Cars
Supplier: Ndfeb magnet, magnetic assembly, ferrite magnets, smco, halbach array magnet, surge protection device, gas discharge tube, lightning protection earthing system, spd, gdt, arrester, surge, lightning
Model : WGQH high voltage cage motor soft start / soft stop Description: National patent owned ,digital intelligent control 1) Main function High voltage motor will creat big shake if start or stop directly, heavily influence the motor service life and loaded equipment , some times motor burnt . WGQH motor soft start/ stop is high-tech national patented product . 1) reduce motor start current, high efficient in saving power 2)much motor protection function (as following introduction) 3)easy install, free maintenance, save maintenance cost 4)highly increase the motor service life 5)accurate setup start torque /start current/start time/ stop time/ etc 6) can connect to computer, PLC 2)USING AREA: suitable motor AC squirrel cage motor Rated voltage it has a high effect of over 96%(top to 97%) 3>:the device combines series¶llel thyristor, professional insulating material imported with original packing and modern power& electric control technology 4)Unique Feature: 1> It perfectly protect the stator and motor from faults like short circuit, over current,current limiting, over-voltage, under-voltage,over load, open-phase, 3 phase unbalance, over heat, communication fault, 2>the main circuit is equippment with component-based structure,modularized installation method, can reach the target of multiiple onver-voltage absorption and protection. 3>it multiply limiting the clamp of transient dv/dt, lighting impulse voltage,operation wave over-voltage and that of transient transition process. it has unique measure and methos to reach pressure balancing of di/dt, valve recanalizing and turn-off. 4>different current intensities are isolated perfectly, the system adopts high anti-interferential digital contactor, matched with fiber/CT isolation transforming technology, which help to avoid interference of each current, making the high voltage performance is as reliable and safe . 5>:the specially designed fault detection return and judging system can pass the detecting result to the control circuit in time and start the sound and light alarm 6>unique heat dissiipation design can effectively cool the thyristor and machine 7>it is of small volume, low power dissipation, high sensitivity, and non-contact and so on, also easy to install. wooden case.
Product description VFD for biomass burner, biomass gasification burner. For electric cabinet frequency and voltage converting, to meet different countries voltage. Ensure the bioamss burner can work well.
Follow Current turn-off metal-ceramic GDT Two-electrode metal-ceramic GDT Three-electrode metal-ceramic GDT SMT metal-ceramic GDT
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Jjr3000 series intelligent soft starter adopts international advanced electronics technology, mcp technology and modern control theory to efficiently limit start voltage of asynchronous motor. The equipment could be widely applied to fan, pump, conveyor, and compressor and other heavy load equipment. It is an excellent product to substitute traditional startup equipments such as star/triangle transition, self -coupling voltage reduction, magnetron voltage reduction and so on.
Supplier: Low voltage power cables, mid voltage power cables, control cables, instrumentation and telecommunication cables, optical fiber cables, mine low voltage power cables, mine mid voltage power cables, rail transit communication cables, railway rolling stock cables, cables for use in photovoltaic systems, fireproof cable, low voltage power cables for shipboard and offshore, mid voltage cables for shipboard and offshore, control cables for shipboard and offshore, instrumentation and telecommunication cables for shipboard and offshore compensating extension cables and compensating cables, rubber sheathed cable, charging post cable, connecting cables for equipment, towline cables, high temperature resistant cable,esp power cable, (electrical submersible pump power cable), mining detection cable, logging cable, submarine power cable
Supplier: Consumer electronics, industrial control, and high speed connectivity cables and connectors.
Services: Manufacturer, designing, customization for consumer electronics, industrial control, and high speed connectivity cables and connectors.
Buyer: Consumer electronics, industrial control, and high speed connectivity cables and connectors.
