Chemical Composition: Al Weight: 20/25kg Al (Min): 99.7%-99.9% Place of Origin: UK Appearance: silvery white Aluminum ingot for remelting is produced by molten salt electrolysis method using alumina and cryolite. Products meet the national standard GB/T1196-2002. The surface of ingot is clean and smooth. Grade Chemical Composition % Impurities Si Fe Cu Ga Mg Zn Mn Others Sum Al99.9 0.50 0.07 0.005 0.02 0.01 0.025 -- 0.010 0.10 Al99.85 0.80 0.12 0.005 0.03 0.02 0.030 -- 0.015 0.15 Al99.7 0.10 0.20 0.010 0.03 0.02 0.030 -- 0.030 0.30 Al99.6 0.16 0.25 0.010 0.03 0.03 0.030 -- 0.030 0.40 Al99.5 0.22 0.30 0.020 0.03 0.05 0.050 -- 0.030 0.50 Al99.00 0.42 0.50 0.020 0.03 0.05 0.050 -- 0.050 1.00 25 kg specification: Product Name: Aluminum ingot for remelting (AL99.70) Dimensions: about 823*183*110 mm Weight: about 25 kg Bale weight: about 1050kg Each delivery unit (25 tons) : 23 bales Packing material: 0.9 x 32 mm steel strip, surface treated with anti-rust. "#" shape binding, binding firm. Execution standard: GB/T1196-2008 standard in the AL99.70 provisions The main models are as follows: AL99.90, AL99.85, AL99.70A, AL99.70, AL99.60, AL99.50, AL99.00.
Magnesium ingot: We can supply various kinds of magnesium related products .Such as magnesium ingot, magnesium alloy, magnesium granular(powder), etc. Magnesium ingot as below:(note:customers special request available!) Magnesium ingot Mg:99.9%min. Al: 0.02%max. Si 0.02%max. Mn 0.02%max. Magnesium ingot size: 7.5kg+/- 0.5kg High purity magnesium: Mg:99.95%min. Al: 0.0040%max. Fe 0.0045%max. Si 0.0070%max. Ni 0.0010%max. Mn 0.0070%max. Cu 0.0030%max. Magnesium ingot size: 7.5kg+/- 0.5kg Mg:99.99%min. Al: 0.0020%max. Fe 0.0045%max. Si 0.0020%max. Ni 0.0010%max. Mn 0.0020%max. Cu 0.0020%max. Magnesium ingot size: 7.5kg+/- 0.5kg Magnesium alloys such as : Az91d, az91hp , az63 , za10, am60, am50, am20, ze41a and so on with the standard of gb/t5153-2003, gb/t19073-2003 and astmb94-92. Magnesium ingot size: 7.5kg+/- 0.5kg Packed on pallets with plastic covering and steel tape to tighten
Magnesium ingot Spec:mg 99.9%min Fe 0.01%max Ni 0.001%max Cl 0.003%max Si 0.02%max Mn 0.019%max Cu 0.001%max Al 0.01%max Size:7.5kg/-0.5kg packing on mg pallet.
Raw melting material - aluminum scraps, cans, engine waste etc. Output capacity - 5-30 tons/h, customized Automation - Full automatic/ half automatic (based on output requirement and investment budget Ingot type - ADC12 (7.5kg/ 10kg / customized) 1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift; 2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing. Every lot of production need to do testing . 3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water. 4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500 5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
Description: Magnesium and Magnesium Alloy sheets and Plates Alloy No. Products Temper Dimensions (mm) Thickness Width ength M2MAZ31B AZ40MAZ41M ME20MZK61M Hot-Rolled Plates H112 H24 10~70 800~1300 1000~3000 2MAZ31B AZ40MAZ41M ME20MMg99.00 Cold/Warm-Rolled Strips, Sheets and Please H24H18O >1.0~10.0 00~1300 =3500 >0.4~1.0 100~600 =2000 >0.25~0.4 100~300 =2000 0.2 3.0~6.0 Coil Weight:25-28kg
*AZ91E *ALMG %50-50 *AZ91D *AM50 *AZ63 *AM60
Magnesium Ingot -
Re mg ca si almax 0.5-0.8 6.0-8.0 1.8-2.1 44-48 1.0 0.7-1.0 5.0-6.0 1.5-2.0 44-48 1.0 0.8-1.2 6.0-6.5 0.8-1.2 44-48 1.0 1.0-1.5 5.5-6.0 1.0-1.5 43-45 1.0 1.2- 1.5 5.0-6.5 1.0-2.0 43-48 1.0 1.5-2.0 5.5-6.0 2.0-3.0 40-44 1.0 1.7-2.1 5.0-6.0 2.0-3.0 40-50 1.0 2.0-2.5 5.0-5.5 2.0-2.5 43-47 1.0 2.2-2.8 5.0-6.0 1.0-2.0 44-46 1.0 2.5-3.0 7.0-9.0 2.5-3.5 44-48 1.0 3.0-3.5 7.0-9.0 3.0-3.5 43-46 1.0 3.5-4.5 3.5-4.5 0.8-1.0 44-48 1.0 Size:2-12mm;5-25mm;10-30mm Packing: 25kg bag in 1mt big bag or 1mt big bag Chemical composition/size/packing can be adjusted according to customer's requirement. 25kgs or 1mt bags
Supplier: All type clothes, urea, all type agriculture and food items, all personal and entertainment items, all industrial and automotive items, all construction household and furnishing, all computers electronics and electrical, handicraft, items, npk, fertilizers t shirt, blanket,dry fruits, animal feeds, towel, bedsheets, toys, all grocery, copper wire scrap, copper ore concentrate, zinc ore concentrate, lead concentrate, fly ash, a4 paper, a3 paper, craft paper, occ, ldpe, hdpe , pvc resin, petroleum products, jp54, jet a1, crude oil, blco , biodiesel, diesel, fuel, coal, d2, petcock, pulses, mustard oil, spices , sanitizer, gloves, medical products, cement, core sand, old ships lng, lpg, all groceries items, food products, hms1 and hms2, fish, chicken feet, chicken paws, agri & food processing agriculture products, fertilizers, seeds, farm products grains, fruits, vegetables, river sands, aggregates, pvc electrical wire, rice, charcoal, wheat flour
Services: Export, import, merchant export import
Buyer: All metals, minerals, petroleum products, food products and paper products
