Small wind turbine generator. Accumulators full charge time: about 8 hours > Mast height/weight: 9m - optional /150kg > Weight: 300kgs (without mast).
Basic Parameters Rated Power(kw) 60 Survival Wind Speed(m/s) 45 Max Power(kw) 65 Working Wind Speed(m/s) 1-25 Rated Voltage(v) 420/600 Rated Wind Speed(m/s) 10 Rated Rotation(r/min) 100 Blade Length(m) 8.6 Cut-in Wind Speed(m/s) 1 Blade Material FRP Cut-out Wind Speed(m/s) 25 Generator Life(year) 20 Some Key Technology Control Method Adjust Speed Method centrifuge variable pitch Brake Method electromagnetic Generator Generator Configuration 3-phase 380/220v 50/60hz Generation Type 3-phase permanent magnet Protect Class IP54
Pelton Turbine Generator Pelton turbine is suitable for medium and high water head power plants. The key components are: Pelton runner, main shaft and Nozzle assembly. Application Scope: Alcance de aplicaci�³n: Water Head:� 100 ~ 1700m Output:� 0.1� ~ 300MW Frequency:� 50/60HZ Runner Diameter:� 0.5 ~ 3m Lift Span 30-50 years 1.Advanced CFD, FEA technic is utilized in the designing process to ensure better technical solution. Getai Hydropower is one of the leading Pelton Turbine manufacturers. Our Pelton Turbine Generator, Pelton Turbine Efficiency, Pelton Runner has high quality and competitive price, and you can see the Application Of Pelton Turbine. CFD analysis for Pelton turbine is performed in order to predict the turbine performance. The head loss in the collecting pipe and injector assembly is calculated based on CFD analysis results. The relation of needle stroke and flow also can be calculated. CFD� analysis can improve injector� and nozzle design to reduce head los. The flow curve relative to needle stroke can be drawn based on analytical data. CFD analysis can simulate the whole procedure which flow coming into and outgoing from bucket. The flow visualization can clearly show whether water flow outgoing from bucket pressure side hit the bucket back side. Such flow situation will cause more hydraulic loss and should be avoid during runner bucket optimum design process. The torque generated by runner and pressure distribution in the bucket can be calculated based on CFD analysis results. Turbine output and efficiency is finally predicted for various operating points The possible location of cavitation can be predicted based on the pressure distribution in the bucket. The phenomena of cavitation should be avoided in the back tip of splitter by optimum design for back shape of splitter Shenyang Getai Hydropower Equipment Co.,Ltd main products: Pelton Turbine, Francis Turbine, Kaplan Turbine, Tubular Turbine, Pelton Turbine Generator, Francis Turbine Generator, Double Francis Turbine, Pelton Turbine Formula, welcome to our factory!
Per requirements. Per requirements
Model: ZH2KW Rated Power: 2000 Watts Maximum Power: ~ 2500 Watts Type: 3 Blade Upwind Rotor Diameter: 3.6 m (12 ft.) Start-up Wind Speed: 2.5 m/s(5.6 mph) Cut-in Wind Speed: 3m/s (6.7mph) Rated Wind Speed: 10 m/s(22mph) Cut-Out Wind Speed: None Furling Wind Speed: 18 m/s (40mph) Max. Design Wind Speed: 50 m/s (112mph) Blade Pitch Control: None, Fixed Pitch Over speed Protection: Auto Furl Gearbox: None, Direct Drive Temperature Range: -40 to +60 Deg. C (-40 to +140 Deg. F) Generator: Permanent Magnet Alternator Output Form: 48 VDC Nominal . Wooden case.
Wind turbine generator we provide wind turbine generator with capacity rom 600kw- 2mw with German or international standard quality. The quotation is of competitiveness with satisfied quality. S43/600KW Wind Generator Sets Main parameters: installed elec. output 600KW/cut-in wind speed 3.2m/s/rated wind speed 15m/s/cut-out wind speed 24m/s/survival wind speed 70m/s/operating temperature -30fpC-45fpC/total weight 65000kg (Rotor :rotor diameter 43m/s wept area 1452m2/number of blades 3/rotational speed 26.8or17.9 rpm/power regulation, stall (Blade:designation,LM19.1/FD43-600 made in China/aerodynamic profile FFA W3 NACA 634/blade material, fiberglass reinforced polyester/aerodynamic brakes, turning blade tip/weight 1960kg (Gear box:type,1-stage planetary,2-stage parallel axles/ratio 1:56.6/Rated power 645KW/efficiency 0.97/rated torque 230KN.m (Generator: rated output 600or 125KW/number of poles 4or6/rated voltage 690V/rated current 560or126A/frequency 50Hz/rated speed 1517or1013rpm (Tower: height 38.5or48.5m/weight 33000 or45800kg (Yaw system :type, active/yaw rate 0.2 S48/750KW Wind Generator Sets Main parameters: installed elec. output 750KW/cut-in wind speed 3.2m/s/rated wind speed 15m/s/cut-out wind speed 24m/s/survival wind speed 70m/s (Rotor: rotor diameter 48.4m/swept area 1840m2/number of blades 3/rotational speed 22.3or14.9 rpm/power regulation, stall (Blade:designation,LM23.2/aerodynamic profile, NACA 63xx-634xx/blade material, fiberglass reinforced polyester/aerodynamic brakes, turning blade tip/weight 3050kg f(Gear box:type,1-stage planetary,2-stage parallel axles/ratio 1:68.2/efficiency fª0.97 (Generator: rated output 750or 185KW/number of poles 4or6/rated voltage 690V/rated current 560or126A/frequency 50Hz/rated speed 1520or1013rpm (Tower: height 65m/weight 75000kg different dimensions
Rotor diameter: 18.0m Blades quantity: 3pcs Direction: always upwind Blades material: Carbon fiber reinforced plastic Rated output: 50KW Power supplied to Grid 60KW [in 5seconds] working voltage: DC500-800V,AC380-400V Annual average energy production: 110MWH (in rate 5m/s wind speed) working wind speed: 3-25m/s Initial wind speed: 3.0m/s Nominal wind speed: 10.0m/sï¼?33.6mphï¼? Storm-stand: up to 55m/s Max rotate speed: 60r/min Wind turbine type: PM 40 poles synchronous generator, Working temperature: from -40 to +60 C Blade Pitch Control Variable Pitch setting Over-speed Protection -Aerodynamic braking system+ -hydraulic rotor brake Speed Regulate and Shut Down Methods -Electro-Yawing, Positive Pitch and -Electric Magnet dumping brake Gearbox: None, Direct Drive Hub height (m) 18-20-24-35 (free-standing or hydraulic tower)
Rotor diameter: 12.56m Blades quantity: 3pcs Direction: always downwind Blades material: Carbon fiber reinforced plastic Rated output: 30KW Power supplied to Grid 32KW [in 5seconds] working voltage: DC500/600V,AC220V/380V Annual average energy production: 70MWH (in rate 5m/s wind speed) working wind speed: 3-35m/s Initial wind speed: 2.5m/s Nominal wind speed: 12.0m/s Storm-stand: up to 55m/s Max rotate speed: 100r/min Wind turbine type: Three-phase, PMG Alternator Working temperature: from -40 to +60 C Blade Pitch Control Variable Pitch Over-speed Protection Aerodynamic brake + Electromechanical disc brake Speed Regulate and Shut Down Methods Electro-Yawing,Positive Pitch and Electric Magnet Switch. Gearbox: None, Direct Drive Tower style and height Free-standing tower 15m, 18m up to 35m.
Rotor diameter: 12.35m Blades quantity: 3pcs Direction: always downwind Blades material: Carbon fiber reinforced plastic Rated output Power: 20KW Power supplied to Grid 24KW [in 5seconds] working voltage: DC360V/500V,AC220V/380V Annual average energy production: 50MWH (in rate 5m/s wind speed) working wind speed: 3-35m/s Initial wind speed: 2.0m/s Nominal wind speed: 9.0m/s30.3mph Storm-stand: up to 55m/s Max rotate speed: 120r/min Wind turbine type: Three-phase, PMG Alternator Working temperature: from -40 to +60 C Blade Pitch Control Variable Pitch Over-speed Protection Aerodynamic brake + Electromechanical disc brake Speed Regulate and Shut Down Methods Auto-Yawing, Positive Pitch and Electric Magnet Switch. Gearbox: None, Direct Drive Battery charge time: SENWEI-
Rotor diameter: 5.0m Blades quantity: 3pcs Direction: always upwind Blades material: Glass fiber reinforced plastic Rated output Power: 5Kw , 5000W Maximum output power: 9500W working voltage: DC48/96/120/240/500V,AC220V/380V Annual average energy production: 11315KWH (in rate 5m/s wind speed) working wind speed: 3-25m/s Initial wind speed: 2.5m/s Nominal wind speed: 10.0m/s22.3mph Storm-stand: up to 50m/s Max rotate speed: 240r/min Wind turbine type: Three-phase, PMG Alternator Working temperature: from -40 to +60 C Blade Pitch Control Fixed Pitch-www.windpowercn.com Over Speed Protection Auto-furl Speed regulation methods: Yawing and electrical magnet switch Stop Methods Manual Brake + Hydraulic Brake Gearbox: None, Direct Drive Batttery full charge time: about 8 hours
