Pelton Turbine Generator

Pelton turbine The runner has bucket shaped blades on the periphery. The jet of water is tangential to the runner. The characteristics are, high head applications, a simple design, few problems with cavitation, highly cost effective. Pelton turbines can be supplied for a head of 100m to 500 m. The runner diameter is available from 0.55 m to 1.5 m. Power capacity is from 200 kW to 10 MW. Inclined jet turbine: The water flows into and out of the runner at an angle to the main shaft. The characteristics are high efficiency over a wide range of water flow, more flexible installation options, somewhat more complex than a Pelton turbine. Inclined jet turbines can be supplied for a head of 60m to 300 m. The runner diameter is available from 0.32 m to 0.8 m. Power capacity is from 55 kW to 6.3 MW.

Supplier: Axial flow, tubular, francis, pelton, propeller turbine and generator sets of 50 kw-50, 000 kw per unit
Services: The company provides complete turnkey solutions for Small & Medium size projects (100kw-50000kw)

Suitable water head: h=100-1000m Suitable flow: q=0.13-5.81m3/s Capacity of the generator unit: 200-20000kw The speed range of the turbine: 250-1000rpm * the runner works by being heavily pushed with jet flow that is switched through injection nozzle from high-pressure pipe. The feature is that is works by impulsing the runner to rotate with kinetic energy of water flow, and the jet center of nozzle and the runner are in the same plane. * it is divided into vertical type and horizontal type two kinds. Horizontal type each has 1-2 runner, each runner has 1-2 nozzle, vertical type each has only one runner, each runner has 2-4 nozzles.

Forged Entire CNC Machined Pelton Runner Forging could considerably improve metal's organizational structure and mechanical property. Forging offers uniformity of composition and structure. Forging results in metallurgical recrystalisation and grain refinement as a result of the thermal cycle and deformation process. This strengthens the resulting steel product particularly in terms of impact and shear strength.Forged steel is generally stronger and more reliable than castings part. Project Basic Information Project Name: Minas-San Francisco HPP Project Location: Ecuador Pelton runner pitch diameter: 2460mm. OD: 3179mm Net Weight: 13300KG Buckent No. 21 Output: 91.6MW Product Introduction 1. Brief introduction for Forged Integrally +100% CNC Machined Pelton Turbine Runner Forging could considerably improve metals organizational structure and mechanical property. Forging offers uniformity of composition and structure. Forging results in metallurgical recrystalisation and grain refinement as a result of the thermal cycle and deformation process. This strengthens the resulting steel product particularly in terms of impact and shear strength. Forged steel is generally stronger and more reliable than castings of same material due to the fact that the grain flows of the steel are altered, conforming to the shape of the part. Getai Hydropower is Pelton Turbine Experiment, Francis Turbine Diagram, Francis Turbine Working, Pelton Turbine For Sale factoty. Performance comparison table of forging parts and casting parts Performance test of forging part Mechanical Property bMpa 0.2Mpa �5% % AKVJ/cm� HB Standard value 795 620 15 45 50 230295 Actual value Horizontal 815 655 17.5 64.5 107 102 110 259 256 253 Vertical 820 660 18.5 67 149 152 136 256 257 257 Performance test of casting part Mechanical Property bMpa 0.2Mpa �´5% % AKVJ/cm� HB Standard value 750 550 15 35 50 221286 Actual value 770 610 17 50 84 88 85 252 255 254 2. Machining vedio for the Forged entire CNC machined Pelton runner. 3. ISO 9001 Quality Management system is carried out to ensure better management control 4. Advanced CFD, FEA technic is utilized in the designing process to ensure better technical solution. 5. CAE casting simulation is adopted for the produciton of casting parts, this advanced and reliable process plan could help effectively improve product quality. 6. All raw material strictly conform to international standard, key component such as runners, guide vane is Forged and entire CNC machined

Supplier: Turbines, crossflow turbine, kaplan turbine, francis turbine, pelton turbine, turgo turbine, tubular turbine, generator, electronic load controller, hydraulic governor, control and protection panels

Providing customized high quality services covering from system design of power plant, electromechanical equipment design and development, and manufacturing technique design, and manufacture, and testing, and inspection and after-sale service Depends on the dimension of the equipment

Small wind turbine generator. Accumulators full charge time: about 8 hours > Mast height/weight: 9m - optional /150kg > Weight: 300kgs (without mast).

Basic Parameters Rated Power(kw) 60 Survival Wind Speed(m/s) 45 Max Power(kw) 65 Working Wind Speed(m/s) 1-25 Rated Voltage(v) 420/600 Rated Wind Speed(m/s) 10 Rated Rotation(r/min) 100 Blade Length(m) 8.6 Cut-in Wind Speed(m/s) 1 Blade Material FRP Cut-out Wind Speed(m/s) 25 Generator Life(year) 20                           Some Key Technology Control Method Adjust Speed Method centrifuge variable pitch Brake Method electromagnetic Generator  Generator Configuration 3-phase 380/220v 50/60hz Generation Type 3-phase permanent magnet Protect Class IP54

Rotor diameter: 18.0m Blades quantity: 3pcs Direction: always upwind Blades material: Carbon fiber reinforced plastic Rated output: 50KW Power supplied to Grid 60KW [in 5seconds] working voltage: DC500-800V,AC380-400V Annual average energy production: 110MWH (in rate 5m/s wind speed) working wind speed: 3-25m/s Initial wind speed: 3.0m/s Nominal wind speed: 10.0m/sï¼?33.6mphï¼? Storm-stand: up to 55m/s Max rotate speed: 60r/min Wind turbine type: PM 40 poles synchronous generator, Working temperature: from -40 to +60 C Blade Pitch Control Variable Pitch setting Over-speed Protection -Aerodynamic braking system+ -hydraulic rotor brake Speed Regulate and Shut Down Methods -Electro-Yawing, Positive Pitch and -Electric Magnet dumping brake Gearbox: None, Direct Drive Hub height (m) 18-20-24-35 (free-standing or hydraulic tower)