Vinceta Corporation

Seagrass Plate Wall Decor is one of the products made from natural seagrass. Skilled artisans in Vietnam weave thin-color plastic strips into dried seagrass, forming a starburst design on each piece of circular wall art. This unique decor adds boho charm to your wall and living space. They are highly durable in lightweight

APPLICATION OF SK-HB K-SILICATE MORTAR :

* K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors.
It is also used for jointing chemical resisting stoneware pipes.
K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles.
The concrete surface needed protection should be dryed, clean and rough.
The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner.

When Bedding and Jointing Materials are the same.
On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints.
The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water.
Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic.
When Bedding and Jointing Materials are Different.
Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR
A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions.

PREPARATIONS OF MORTAR :
* Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan.

* Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar.

* In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared.

* The cement mortar will be used before it starts setting.

Acid / Alkali Resistant Tiles/Bricks

* Our Acid proof tiles, Acid alkali resistant tiles, Chemical resistant tiles are fully vitrified tiles which are manufactured using special non ferrous clay, processed at extremely high temperatures this process causes the raw materials to fuse and form a compact mass with an extremely low water absorption of less than 0.5% resulting in the formation of a very strong body with a flexural strength of 38 N/mm2, solid through color fade proof with a very hard surface Mohs hardness of 7.

* The acid resistant tiles come in a range of sizes and thicknesses from ranging from 8-25mm. Our acid proof tiles meet stringent specification norms of IS 4457:2007 and relevant ASTM/DIN standards which ensure excellent performance in Acid/Alkali/Chemical (expect Hydrofluoric acid and its derivatives).

Corrosion Protection Applications
* Factory Floors subject to corrosion from Chemicals, Acids, Oil & Solvents
* Pickling tank and surrounding areas
* Food & Beverage Industry flooring
* Battery rooms and Control rooms
* Demineralization plants
* Walls of washing and Paint shop areas
* Acid Resistant Tiles Manufacturers India
* Our acid proof tiles provide excellent abrasion resistance, anti-skid properties for worker safety and high aesthetic appeal. We also provide specialized corner tiles for reducing chances for acid attack through construction joints. Our standard sizes are 200x100, 200x200 & 300x300 millimeters.

The Ground Granulated Blast Furnace Slag (GGBS/GGBFS) is a type of eco-friendly green building material and high quality secondary cementitious material for concrete and cement. It is recognized as one of the best secondary cementations material for building high durable concrete stricture in the world today! GGBS has taken over a top place of high-performance cement and concrete mineral additives with its unique characteristics of hydration, low-price raw material. GGBS is obtained by quenching molten iron blast furnace slag (a by-product of iron and steel making) in water or steam. It is then further grounded into the desired fineness in terms of the required particle size distribution. The main components of blast furnace slag are CaO (30-50%), SiO2 (28-38%), Al2O3 (8-24%), and MgO (1-18%). The other important aspect of GGBS is its superiority in concrete durability which extends the lifespan of buildings from fifty years to a hundred years.

APPLICATIONS

Soil stabilization
Mortar
Used in combination with Portland cement
Pre-cast concrete
Ready mix concrete
Specialist projects

JHG shower door is produced with several types of glass. The current modern design trend has given us more choice on glass types, colors, and patterns.

Shower door glass is made with tempered glass,laminated glass , with excellent drilling ,cutouts ,and polished edge

The main products series :

** Tempered clear glass

clear glass is the most ordinarily used option for shower enclosures, low cost and easy clean

**Tempered pattern glass

The pattern bring distinctive decorative on the glass surface

Let the glass in high opacity ,guarantee a higher level of privacy

One side of the glass is patterned ,and the other side is flat for easier cleaning

**tempered acid etched glass/ gradient change glass

Processed on base of acid etched glass

The opaque and satin surface bring artistic effect

Gradient change is an interesting new decorative products ,and rapidly accepted by modern shower door designs.

Easy cleaning

**tempered low iron glass

High light transparent with colorless appearance

The glass blue edge make the whole shower enclosure in high grade

**tempered glass with anti-limescale coating

For preserve the functional and aesthetic properties of shower glass ,we offer coated glass for avoid damage caused by water sediments

JHG shower door is produced with several types of glass. The current modern design trend has given us more choice on glass types, colors, and patterns.

Shower door glass is made with tempered glass , with excellent drilling ,cutouts ,and polished edge

The main products series :

**Tempered clear glass

clear glass is the most ordinarily used option for shower enclosures, low cost and easy clean

**Tempered rain/nashiji pattern glass

The pattern bring distinctive decorative on the glass surface

Let the glass in high opacity ,guarantee a higher level of privacy

One side of the glass is patterned ,and the other side is flat for easier cleaning

**tempered acid etched glass/ gradient change glass

Processed on base of acid etched glass

The opaque and satin surface bring artistic effect

Gradient change is an interesting new decorative products ,and rapidly accepted by modern shower door designs.

Easy cleaning

**tempered low iron glass

High light transparent with colorless appearance

The glass blue edge make the whole shower enclosure in high grade

**tempered glass with anti-limescale coating

For preserve the functional and aesthetic properties of shower glass ,we offer coated glass for avoid damage caused by water sediments

1, Safe working load: 200kg

2, The back board folding angle: 70

3, The thigh board folding angle: 30

4.TR/ATR:0-20

5, The four motors automatically realize various positions. The motors are selected from internationally renowned brand Timotion, which are safe and noiseless.

6, Two control methods, operation handle control and guardrail built-in button operation, control handle is clear and easy to operate; built-in buttons on the side rail near headboard, graphic display, clear at a glance. The key has lock function, which reduces the probability of misoperation and locks safely.

7, Side rail:

1),Two side rail in each side of bed.

2),It can be automatically locked when raising, and each guardrail can bear more than 50KG.

3), Guardrail safety switch design, placed under the guardrail to avoid misuse of the patient;

4), Equipped with gas spring for easy operation.

5), The steel structure of the guardrail base is welded on the bed to ensure safety.

6), The 4-pieces guardrail has angle indicator that allows the caregiver to quickly and easily adjust the backrest angle and TR/ATR angle of the bed.

7),It equipped with guardrail built-in button to make it easier for the patient to operate the bed.

8, Casters

1), The four casters use 125mm center control one.

2), Steel structure, precision ball bearings are placed in the rotating head and the caster, the caster frame is equipped with a wheel cover made of synthetic material, suitable for locking the lever with a cam hole. Caster surface material: polyurethan, passed EN 12531 standard, single dynamic (force) load is not more than 175 kg, static load is not more than 200 kg

3),Braking system: Pedal-type synchronous braking arms on both sides of the bed, adopting all-metal structure, compact structure and reliable braking.

9, Shank board can be adjusted manually by simple steel support for convenience position.

10, At the 4 corners of the bed, there is an diameter HDPE anti-collision wheel which intergated on H/F board.

11, There are 1 hook in each side for drainage bag.

12, It equipped with manual CPR for emergency treatment.

When looking for One Piece Basin "ABC Import & Exports PVT LTD" is the No.1 choice of customers we have 1000+ designs to choose from. To help you further please contact us for a complete catalog of our company......!!!!!!!!!

Enhance Your Perimeter: Exploring Top-Quality Chain Link Fence Fittings by Him Overseas
In the realm of security and aesthetics, Chain Link Fence Fittings play a pivotal role in fortifying your perimeters. At Him Overseas, we take pride in presenting an extensive array of these fittings, meticulously designed to elevate your fencing solutions. Let's delve into the world of durable, high-grade fittings that redefine security standards.

Unveiling the Arsenal: Him Overseas' Chain Link Fence Fittings Selection
1. Fence Bands
2. Fence Wheel Carriers
3. Fence Clamps
4. Fence Collars
5. Fence Gate Rollers
6. Fence Hardware Fittings
7. Fence Metal Ornamental Fittings

The Him Overseas Advantage As an ISO 9001:2008 certified organization, Him Overseas is committed to delivering Chain Link Fence Fittings of optimum quality. We understand the diverse needs of our clients and manufacture our fittings using high-grade stainless steel and other metals. The result? Chain Link Fence Fittings that boast superior physical and mechanical properties, ensuring resilience in adverse environments.

Your Trusted Partner in Fencing Solutions Him Overseas stands as a beacon in the industry, recognized as one of the leading Manufacturers and Exporters of Chain Link Fence Fittings. We take pride in offering the largest supply of fittings, catering to all customers with affordability as a core principle.

When looking for Table Top Wash Basin ABC Import & Exports PVT LTD is the No.1 choice of customers we have 1000+ designs to choose from. To help you further please contact us for a complete catalog of our company......!!!!!!!!!