Ceramic Adhesive
Providing you the best range of high temperature inorganic ceramic adhesive with effective & timely delivery.
At-701s is a kind of styrene acrylate synthetic latex, which has good bonding performance on the back of ceramic tile, vitreous brick and marble brick. AT the same time, the product has excellent bonding strength after immersion and fast drying speed, especially suitable for making ceramic tile back coating. Appearance milk white liquid Solid content:52-53% PH :7.0-9.0 Viscosity :500-1000 cps (3#60/25 Particle size :0.1-0.2 micron MFT: 0 Ion features: anion Use :At-701S is a water-based emulsion used for gluing the back of ceramic tiles. It has excellent adhesion properties for ceramic tiles, glass tiles and marble tiles.
Slipping : 0,5 mm Density : 1450 ± 100 kg/m³ Open time : 30 min Application. Temperature : +5 Cº / +35Cº Bonding Strenght : 0,50 N/m² Grouting Appl. Time : 48 hours later. 25 kg kraft stack paper.
Description VOG is one component, premixed, modified polymer cement based tile adhesive used for bonding ceramic tile on the surfaces of wall, ground and floor. It is easily applied and can achieve an excellent adhesion. Where to use: - For wall surface: To bond ceramic tile (maximum is 60X60cm) on the concrete or cement sand rendering. - For floor and ground: To bond ceramic tile or building stone. Advantages - Stable performance, use directly after mix it with water; - Good flexibility - Nontoxic, non-radiant, no irritative odor; Application Surface Preparation: - The surface should be vertical, flat, smooth and free of dust, grease and other contaminants. Mixing Add clean water to suitable mixing bucket. Mix slowly and continuously to form a homogeneous mixture - VOG 25kg barrel required approximately 5 - 6,0 litres of clean water - VOG 5kg barrel required approximately 1 - 1,2 litres of clean water The mixed materials is immediately ready to use and should be used within 25-30 minutes after mixing. Storage Conditions: Keep in cool and dry places Packaging: 25kg/barrel and 5kg/ barrel SHELF LIFE: 09 months
Product name :Ceramic Tile Adhesive Unit price : 5.5USD/Bag FOB Tianjin port . Packing: 20Kg/Bag,25MT/20FCL Country of origin :China
For bonding tiles, ceramics, glazed tiles, granites, marbles, decorative bricks, glass mosaics, cast and natural stones; for vertical and horizontal applications of the interior and exterior of buildings; all ceramic coating materials with high absorption capacity; wet areas such as kitchen, balcony, terrace, swimming pools and water reservoirs.
Description: Cetfix NSA is polymer modified cement based powder needs to be mixed with water for installation tiles over tile or smooth surface without removing old tiles or hacking the surface. Advantages: Excellent waterproofing characteristics Ready to use, No curing required Soaking of tiles not required Reduces labour cost Excellent adhesion, low shrinkage Area of application: Suitable for tile on tile application Plastered wall Bathrooms Swimming pools Kitchen Wash area 20 KG
1) material: crepe paper 2) adhesive: rubber based 3) colors: beige 4) thermal level: 80-180 centigradeapplied to be toasted many times under the environment of high temperature 8) widely used in taping of electronic components, such as ceramic electric capacity, the electric capacity of the dacron, mental electric capacity, electric capacity of temperature sensing and so on we can provide various widths and lengths We can manufacture the size of you demand
