Dust sensor module dsm501b description Dust sensor module: dsm501 series detects the level of indoor airborne dust, particles, and pollen, and ideal for use in stand-alone air cleaner or iaq monitor. Pwm output of the sensor can be directly connected to î¼-com to control fan speed or ventilation and also to display the level of particles. Detectable size of particle is limited to minimum 0.7 um, and the application for smoke or fire alarm is prohibited. Dust sensor module dsm501b type: Dsm501a : 2mm pitch connector type (20010wr-05). Dsm501b : 2.5mm pitch connector type (s5b-eh). Dust sensor module dsm501b electrical characteristics: Supply voltage: dc510% Power consumption: 90ma Operating temperature range: -10~ +65'c Operating humidity range: 95%rh or less (without dew condensation) Recommend storage condition: -20 ~ +80'c Dimension: w59 * h45 * d20 (mm) Detectable particle size: approx. 1um (minimum) Detectable range of concentration: 0 - 1.4mg/m3 Output signal: pwm (pulse width modulation) Time for stabilization: 1 minute after power turned on Sensor characteristics: to be maintained in between the upper limit and lower limit of the standard dust sensor unit Dust sensor module dsm501b features: * pwm output * easy installation * single power supply * compact size and lightweight Dust sensor module dsm501b application: * ventilator etc * air conditioner * air quality monitor * air cleaner or air purifier
Product Description WDS308 Integrated dust monitoring sensor is a specialized small instrument applied to monitor dust at construction sites. It can monitor eight meteorological elements, wind speed, wind direction, air temperature, air humidity, air pressure, rainfall, radiation, UV index, and can also monitor three environmental factors, PM2.5, PM10 and noise. The system is modularized and can be configured flexibly. Small volume, low cost, and it suitable for industrialized intensive stationing monitoring. Features l Maintenance free design l Standard output protocol RS485 l Small volume, light weight l Installation height is unrestricted l Low power consumption, high precision l Integrated dust monitoring system l China's first production company
Power (W): 15; Power factor: 0,5; Voltage/Frequency (V/Hz): 220/50; CCT (K): 3000K/6500; Luminous efficacy (lm/W): 60/63; CRI (Ra): 80; Life span (hrs): 25.000; IP54; Flicker-free; CE, KC certified, can apply for other standards as requirements; Warranty: 2 years; OEM accepted;
Dust Sensor Module DSM501B Description Dust Sensor Module: DSM501 series detects the level of indoor airborne dust, particles, and pollen, and ideal for use in stand-alone air cleaner or IAQ monitor. PWM output of the sensor can be directly connected to μ-com to control fan speed or ventilation and also to display the level of particles. Detectable size of particle is limited to minimum 0.7 μm, and the application for smoke or fire alarm is prohibited. Dust Sensor Module DSM501B Type: DSM501A : 2mm pitch connector type (20010WR-05). DSM501B : 2.5mm pitch connector type (S5B-EH). Dust Sensor Module DSM501B Electrical characteristics: Supply voltage: DC5V +/- 10% Power consumption: 90mA Operating temperature range: -10~ +65'C Operating humidity range: 95%RH or less (without dew condensation) Recommend storage condition: -20~ +80'C Dimension: W59 * H45 * D20 (mm) Detectable particle size: approx. 1um (minimum) Detectable range of concentration: 0 ~ 1.4mg/m3 Output signal: PWM (pulse width modulation) Time for stabilization: 1 minute after power turned on Sensor characteristics: To be maintained in between the upper limit and lower limit of the standard dust sensor unit Dust Sensor Module DSM501B Features: * PWM output * Easy installation * Single power supply * Compact size and lightweight Dust Sensor Module DSM501B Application: * Ventilator etc * Air conditioner * Air quality monitor * Air cleaner or Air purifier
As per PN and Model Standard lot size
Sensor The dis include: current sensor, voltage sensor, photo gate sensor, light level sensor, force sensor, micro current sensor, motion sensor, temperature sensor, gas pressure sensor, sound sensor, 1394 interface data line, usb date line and dislab software.
PCFS-IR2125A level sensor contact type, it is used for tube. The principle is infrared, output signal is analog. When there is no water, the sensor outputs low voltage value; When there is water, the sensor outputs a high voltage signal. The size can be customized. The photoelectric liquid level switch has high precision, low price, high reliability and wide application environment, it is less affected by strong acid, alkali and viscosity. Photoelectric level sensors can be used for higher liquid level accuracy requirements.
Power (W): 18; Power factor: 0,5; Voltage/Frequency (V/Hz): 220/50; CCT (K): 6500/3000; Luminous efficacy (lm/W): 70; CRI (Ra): 80; Life span (hrs): 25.000; IP54; Two options: Round shape & Square shape; Flicker-free; CE, KC certified, can apply for other standards as requirements; Warranty: 2 years; OEM accepted;
Power (W): 7/10/12/15/20/30; Power factor: 0,9; Voltage/Frequency (V/Hz): 220/60; CCT (K): 3000/4000/5000/5700/6500; Luminous efficacy (lm/W): 90/105/110; CRI (Ra): 80; Life span (hrs): 25.000; Various options: - Type 1: AC direct - Type 2: High efficacy - Type 3: 3-CCT Changeable AC direct - Type 4: 3-CCT Changeable High efficacy - Type 5: 3-Step Dimming - Type 6: PIR sensor Flicker-free, EMC; KC, CE certified, can apply for other standards as requirements; Warranty: 2 years; OEM accepted;
