Graphite electrode mainly petroleum coke, needle coke as raw material, coal pitch as binder, calcination, ingredients, kneading,molding, baking and graphitization, machining and made, which is released in electric arc furnace in the form of arc conductor of electricity to heat melting furnace charge, with low resistivity, good conductivity, low ash, uniform and compact structure, good oxidation resistance, high mechanical strength, etc.Please contact us if necessary.
The graphite electrode comprises: (1) Regular power graphite electrode( RP grade Graphite Electrode) . Graphite electrode with current density less than 17a / cm2 is allowed to be used in common power electric furnaces for steelmaking, silicon smelting and yellow phosphorus smelting. (2) Oxidation resistant coating graphite electrode. A graphite electrode coated with an anti-oxidation protective layer (graphite electrode anti oxidant). The formation of both conductive and high temperature oxidation resistant protective layer can reduce the electrode consumption (19% ~ 50%), prolong the service life of the electrode (22% ~ 60%), and reduce the electric energy consumption of the electrode. The popularization and application of this technology can bring such economic and social effects as follows: 1. The unit consumption of graphite electrode is less, and the production cost is reduced to a certain extent. For example, according to the consumption of 35 graphite electrodes per week and 165 refining heats of LF refining furnace in a steel-making plant without shutdown in the whole year, 373 (153 tons) electrodes can be saved every year by using graphite electrode oxidation resistance technology, and RMB 2585700 can be saved by RMB 16900 per ton of ultra-high power electrode per year. 2 The graphite electrode consumes less electricity, saves the unit electricity consumption of steelmaking, saves the production cost, saves energy! 3. Because the graphite electrode is replaced less times, the labor amount and risk coefficient of operators are reduced, and the production efficiency is improved. 4 Graphite electrode is a high consumption and high pollution product, which has a very important social significance in the days of promoting energy conservation, emission reduction and environmental protection. This technology is still in the stage of research and development in China, and some domestic manufacturers have begun to produce it. It is widely used in Japan and other developed countries. At present, there are also companies that import the anti-oxidation protective coating in China. (3) High power graphite electrode (HP grade Graphite Electrode). Graphite electrode with current density of 18-25a / cm2 is allowed to be used in high power electric arc furnace for steelmaking. (4) Ultra high power graphite electrode( UHP grade Graphite Electrode). Graphite electrode with current density greater than 25A / cm2 is allowed. It is mainly used in ultra high power EAF.
UHP 400mm*1800mm UHP 450mm*1800mm Used in steel, cement and glass manufacturing, expanded graphite - based sealing gaskets, graphite grease, braid, brushes, brake lining, etc.
Electrode Paste
SI 0.28 p 0.004% V.m 10 .15 ash 4.0% fe 0.25% resistivity 65 .90 Density 1.46g&cm compression strength 18mpa real density 1.98gcm
Supplier: Graphite electrode, electrode paste, carbon raiser
Services: Rp.hp.uhp graphite electrode, electrode paste
Our graphite electrodes has the following feature: 1 Lower electric resistivity, good electric and heat conductivity; 2 High mechanical strength under high temperature; 3 High resistance to thermal shock and mechanical vibration; 4 Lower ash content; SPEC:graphite electrode Dia75--600mm.Length: 1200~2700mm Grade:RP,HP,SHP,FG and UHP.
Length : 1600~2200mm Grade : HP (High Power) Resistance (m) : 5.8~8.5 micro ohm.m Apparent Density (g/cm ) : 1.56~1.70 g/cc RP HP UHP Thermal Expansion ; 1.3~2.5 RP HP UHP Flexural Strength (N/A) : 8.5~12 Mpa RP HP UHP
Artifical graphite electrodes is made of high-quality low ash materials,like the petroleum coke,needle coke and coal pitch.After experiencing calcinations,burdening,kneading,forming,baking and pressure impregnation,it is graphitized in a hign temperature of over 3000â??, And then treated with machining.this kind of product is widely used for electric arc steel-making,yellow phosphorus,indusreial silicon,other alloys and non-metallic materials of electric atc furnace. this product is characterized by low resistivity,good electrical conductivity,low ash,even and compact structure,good antioxidation and high mechanical strength
A graphite electrode is a type of electrode used in electric arc furnaces (EAFs) to melt and refine steel, iron, and other metals. It is made of graphite, a form of carbon that has unique properties such as high thermal conductivity, high melting point, low coefficient of thermal expansion, and good electrical conductivity. Graphite electrodes are essential components in the production of high-quality steel and are widely used in the metalworking industry. Graphite electrodes are typically cylindrical in shape and range in size from 75 to 700 millimeters in diameter and 1 to 2 meters in length. They are installed in EAFs to conduct electric current and generate heat to melt and refine metal. When an electric current passes through the graphite electrodes, it generates an electric arc, which produces temperatures of up to 3,500�°C (6,332�°F). This extreme heat melts the metal in the furnace and allows impurities to be removed, resulting in a high-quality end product. Graphite electrodes are chosen for EAFs due to their high electrical conductivity, low electrical resistance, and excellent thermal shock resistance. They are also relatively easy to shape and mold, which allows them to be manufactured in various sizes and shapes to meet the specific needs of different industries. The quality of graphite electrodes is determined by factors such as their electrical resistivity, flexural strength, thermal expansion coefficient, and oxidation resistance.
