1. Production style: There are 8 kinds of steel fiber: flat head steel fiber, needle-flat steel fiber, corrugation steel fiber, undee steel fiber, micro-steel fiber, concave-flat steel fiber, stainless steel fiber. Also we can produce the fiber according to customer requirement regarding the diameter, length, shape and others 2. Length: 13-60mm 3. Diameter: 0.22-1.0mm 4. Tensile strength: 800-2500mpa 5. Standard: These products meet the requirements of astm a820 type i 6. Technical advantages: A. Easy dispersing, no balling and caking, distributing uniformly B. Greatly increased concrete ductility C. Greatly increased concrete tensile strength D. Increase anti-cracking E.Reduce the crack space F. Increase shear strength of component G .Increase shock-shear strength of slab - column structure H.Increase partial compressive strength I.Increase anti-earthquake and anti-blast J.Increase anti-abrasion and anti-cavitation erosion K. Increase prestressed unit anti-crack and bearing capacity L.Increase bending resistant, anti-shear fatigue m . Increase component shock strength 7. Economic benefits: A. Can extend the using life of project B. Can reduce the thickness of concrete and save the quantities of concrete under the same intensity C. Can take place of steel totally or partially D. Replace in concrete the traditional mesh reinforcement. E. Can reduce the workload of project, shorten the processing period, save the cost of project Packing :damp-proof poly bag, n.W 25kg/bag or 20kg/bag;40 bags/pallet or 50bags/pallet(1000kg/pallet), With plastic pellicle for out packing to protect the pallet or according to customer's requirements
Supplier: Chemical, chemical raw material, auxiliaries, solvents, paint, textile fiber, rubber, plastic, paint drier, plasticizer, flame retardant, surfactant, additives, steel pipe, steel tube, stainless steel tube, stainless steel pipe, ms pipe, pipe fitting, flange, fasteners, steel wire
Services: Transportation agent,customs clearance service,
Buyer: Import chemical raw materials, auxiliaries, bulk commodities
GFRP rebar is made of high-strength glass fibers along with a highly durable resin. These products are developed as a superior alternative to steel in concrete reinforcement. It is widely used to reinforcing concrete in applications where it is exposed to water, salt water or chemical environments - Typical Advantages: - Non-Corrosive â?? It will not corrode when exposed to a wide variety of corrosive substances - including chlorides - High Strength-to-Weight Ratio â?? best reinforcement for weight sensitive reinforcement - Non-Conductiveâ?? It is excellent electrical and thermal insulator - Excellent Fatigue Resistanceâ?? performs best in cyclic loading solutions - Impact Resistanceâ?? It resists sudden and severe point loading - Magnetic Resistance â?? completely non-effective to electromagnetic fields; excellent for use in electromagnetic testing facilities - Light Weight easy to transport, no need for lifting equipment, easy to handle
Supplier: All types of reinforced steel bars (tmt bars), hot rolled & cold rolled coils, cs plates, ss plates, channels, angles, beams, pipes, structural steel, chequered plates, and metal scraps.
Services: Trader, exporter & importer
Buyer: All types of reinforced steel bars (tmt bars), hot rolled & cold rolled coils, cs plates, ss plates, channels, angles, beams, pipes, structural steel, chequered plates, and metal scraps.
APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.
The Ground Granulated Blast Furnace Slag (GGBS/GGBFS) is a type of eco-friendly green building material and high quality secondary cementitious material for concrete and cement. It is recognized as one of the best secondary cementations material for building high durable concrete stricture in the world today! GGBS has taken over a top place of high-performance cement and concrete mineral additives with its unique characteristics of hydration, low-price raw material. GGBS is obtained by quenching molten iron blast furnace slag (a by-product of iron and steel making) in water or steam. It is then further grounded into the desired fineness in terms of the required particle size distribution. The main components of blast furnace slag are CaO (30-50%), SiO2 (28-38%), Al2O3 (8-24%), and MgO (1-18%). The other important aspect of GGBS is its superiority in concrete durability which extends the lifespan of buildings from fifty years to a hundred years. APPLICATIONS Soil stabilization Mortar Used in combination with Portland cement Pre-cast concrete Ready mix concrete Specialist projects
Supplier: Textile products, colour dyes, handloom products, cotton yarns, fabrics, agro chemicals, organic chemicals, inorganic chemicals, pesticides, plastic household products, plastic polymers, fibers raw materials, fibers products, engineering products, mineral & metallurgy products, electronic products, consumer electronics products, cereals, halal products, dairy products, stationary products, beauty and cosmetics products, furniture, gardening tools, tiles & sanitaryware, flavour and fragrances, construction products, kraft paper rolls, grocery items, kitchen utensils, pipes & fittings, paper and pulps products, spices, empty glass bottles, stainless steel products, hardware products, and many more.
Two component, acrylic aliphatic polyurethane coating. Offers excellent gloss and colour retention. It is used for subtracts as steel, aluminum, glass-fiber, plywood etc.
Supplier: Metal dept: copper, construction department : steel rebar, cement, concrete, food department: rice, sugar, saffron, asafoethida
