Origin Egypt Form Pellets Available Colors: Black Grade: Blowing Shipping Terms: FOB/CIF MFI 0.64 gr/10 min Density 0.891 gr/cm3 Polymer Content 97.93 % Ash Content 2.07 % Packaging 25kgs net weight in PP woven Loading Port: Sokhna, Egypt.
Origin Egypt Form Pellets Grade: Blowing Available Colors Red-Yellow-Blue-Green Shipping Terms: FOB/CIF MFI 0.64 gr/10 min Density 0.891 gr/cm3 Polymer Content 97.93 % Ash Content 2.07 % Packaging 25kgs net weight Loading Port: Sokhna Port Regular Supply: Available
Origin Egypt Form Pellets Available Colors: Natural Shipping Terms: FOB/CIF Grade: Blowing MFI 0.1366 gr/10 min Density 0.904 gr/cm3 Polymer Content 96.59 % Ash Content 3.91 % Packaging 25kgs net weight Loading Port: Sokhna, Egypt. Regular Supply, Egypt.
Origin Egypt Form Pellets Available Colors: Natural Shipping Terms: FOB/CIF Grade: Blowing MFI 0.3413 gr/10 min Density 0.880 gr/cm3 Polymer Content 97.73 % Ash Content 2.27 % Packaging 25kgs net weight Loading Port: Sokhna, Egypt. Regular Supply, Egypt.
Recycled PCR rHDPE Gray pellets Produced from PCR bottle caps Ideal for injection moulding and blends Quantity: 200MT
MFR 190/2.16
Model No.: CF HDPE Characteristic: Thermoplastic Resin Molecular Principal Chain: Carbon Chain Polymer Synthetic Resin: Polyethylene Natural Resin: Synthetic Resin Color: Transparent
Virgin HDPE 7000F Polyethylene HDPE 7000F is high density polyethylene film grade which well known for the high quality film applications. This grade is excellent for thin film processing with high mechanical strength, good stiffness and good heat sealability. It is suitable for producing general purpose packaging films in a wide range of size and thickness. Products indicators HDPE cable material Property Unit Typical Value Mass density g/cm 0.941-0.959 Melt flow Rate(190 Centigrade /2.16kg) g/10min 1.0 Tensile yield strength MPa 19.0 Flexural modulus Mpa 965 Elongation@ break % 400 Impact Embrittlement temperature Centigrade MAX -118 Dielectric Constant 100KHZ 2.32 1MHZ 2.31 Loss Tangent 100KHZ MAX 0.0001 1MHZ MAX 0.0001 Volume resistivity OHM-CM MIN 1x10 15
rHDPE (Recycled) pellets - Injection Grade NearPrime Marlex spec. MFI: 6.48-7 g/10min (190c, 2.16KG) Density: 0.967 Ideal for Crates, Pellets production or other injection moulding.
Item Test Condition Test Method Value Unit MFR 190 C/2.16kg ASTM D-1238 20 g/10min Density --- ASTM D-792 0.954 g/cm3 Tensile strength at yiled --- ASTM D-638 28 MPa Elongation at break --- ASTM D-638 250 % Impact tensile strength --- ASTM D-1822 42 kJ/m2 ESCR ASTM D-1693 3 --- VACIT --- ASTM D-1525 127 C
