Origin Egypt
Form Pellets
Grade: Blowing
Available Colors Red-Yellow-Blue-Green
Shipping Terms: FOB/CIF
MFI 0.64 gr/10 min
Density 0.891 gr/cm3
Polymer Content 97.93 %
Ash Content 2.07 %
Packaging 25kgs net weight
Loading Port: Sokhna Port
Regular Supply: Available
Origin Egypt Form Pellets Available Colors: Black Grade: Blowing Shipping Terms: FOB/CIF MFI 0.64 gr/10 min Density 0.891 gr/cm3 Polymer Content 97.93 % Ash Content 2.07 % Packaging 25kgs net weight in PP woven Loading Port: Sokhna, Egypt.
Origin Egypt Form Pellets Available Colors: Natural Shipping Terms: FOB/CIF Grade: Blowing MFI 0.1366 gr/10 min Density 0.904 gr/cm3 Polymer Content 96.59 % Ash Content 3.91 % Packaging 25kgs net weight Loading Port: Sokhna, Egypt. Regular Supply, Egypt.
Origin Egypt Form Pellets Available Colors: Natural Shipping Terms: FOB/CIF Grade: Blowing MFI 0.3413 gr/10 min Density 0.880 gr/cm3 Polymer Content 97.73 % Ash Content 2.27 % Packaging 25kgs net weight Loading Port: Sokhna, Egypt. Regular Supply, Egypt.
Recycled PCR rHDPE Gray pellets Produced from PCR bottle caps Ideal for injection moulding and blends Quantity: 200MT
Virgin HDPE 7000F Polyethylene HDPE 7000F is high density polyethylene film grade which well known for the high quality film applications. This grade is excellent for thin film processing with high mechanical strength, good stiffness and good heat sealability. It is suitable for producing general purpose packaging films in a wide range of size and thickness. Products indicators HDPE cable material Property Unit Typical Value Mass density g/cm 0.941-0.959 Melt flow Rate(190 Centigrade /2.16kg) g/10min 1.0 Tensile yield strength MPa 19.0 Flexural modulus Mpa 965 Elongation@ break % 400 Impact Embrittlement temperature Centigrade MAX -118 Dielectric Constant 100KHZ 2.32 1MHZ 2.31 Loss Tangent 100KHZ MAX 0.0001 1MHZ MAX 0.0001 Volume resistivity OHM-CM MIN 1x10 15
rHDPE (Recycled) pellets - Injection Grade NearPrime Marlex spec. MFI: 6.48-7 g/10min (190c, 2.16KG) Density: 0.967 Ideal for Crates, Pellets production or other injection moulding.
Item Test Condition Test Method Value Unit MFR 190 C/2.16kg ASTM D-1238 20 g/10min Density --- ASTM D-792 0.954 g/cm3 Tensile strength at yiled --- ASTM D-638 28 MPa Elongation at break --- ASTM D-638 250 % Impact tensile strength --- ASTM D-1822 42 kJ/m2 ESCR ASTM D-1693 3 --- VACIT --- ASTM D-1525 127 C
Item Test condition Test Method Value Unit Density ISO 1183 0.944-0.955 g/cm3 MFR 190 C/2.16kg ISO 1133 0.03-0.07 g/10min Tensile strength at yield ISO 527-2 22 MPa Elongation at break ISO 527-2 >350 % ESCR F50,50 C,100% ASTM D-1693A 1000 h VICAT ASTM D-1525 126 C For extrusion packaging film, rope, woven bags, fishing nets, water pipes; injection of low-end commodity and housing, non-bearing load components, plastic box, turnover box; extrusion blow molding containers, hollow products, bottles.
Origin: Malaysia Category: HDPE Type: Recycled Pellets Color: Natural Quantity: 25 Tons Loading weight: 25 Tons Specification: HN-901 PCR HDPE Natural recycled plastic pellets (Hot Wash) Our products are ideally suited for blow moulding applications in the production of bottles. These materials consist of high-quality milk and detergent bottles, which are subject to lower levels of contamination. GRS, Reach Compliance, 100% Post consumer recycled content by SCS Global Services, ISO 9001 & ISO 14001.
