Type 17HS3410-02
Phase 2
Body length 34mm
Rated voltage 5 V
Resistance (20) 5.0± 10% / phase
Holding torque 0.3 N.cm
Rotor Torque 38 g.cm2
Step angle 1.8± 5%
Rated current DC 1.0 A/phase
Inductance 7.1±20% mH / phase
Insulation Class Class B
Type 34HS8450-45
Phase 2
Body length 80mm
Rated voltage 2.1 V
Resistance (20 )  0.35± 0.1 / phase
Holding torque 4.5 N.cm
Rotor Torque 1400 g.cm2
Step angle 1.8± 5%
Rated current DC 6.0 A/phase
Inductance 3.6±20% mH / phase
Insulation  Class Class B
The d2hb882mb is an economical microstepping driver based on patented technology of longs motor.It is suitable for driving 2-phase 4-phase hybrid stepping motors .By using the advanced bipolar constant-current shopping technique , it can output more speed and torque from the same motor, compared with traditional drivers , such as l/r drivers .Its 3-state current control technology allows coil currents to be well controlled and with relatively small current ripple, therefore less motor heating is achieved.
Features
Low cost and good high-speed torque
14 selectable resolutions
Supply voltage up to +80vdc
Suitable for-2-phase and 4-phase motors
Output current up to 5.86a
Dip switch current setting 8different values
Optically isolated input signals
Pulse frequency up to 200khz
Automatic idle-current reduction
Small size (107*97*48), weight:1kg
The d2hb542ma is an economical microstepping driver based on patented technology of longs motor.It is suitable for driving 2-phase 4-phase hybrid stepping motors .By using the advanced bipolar constant-current shopping technique , it can output more speed and torque from the same motor, compared with traditional drivers , such as l/r drivers .Its 3-state current control technology allows coil currents to be well controlled and with relatively small current ripple, therefore less motor heating is achieved.
Features
Low cost and good high-speed torque
Supply voltage up to +45vdc
Output current up to 5.86a
Optically isolated input signals
Automatic idle-current reduction
14 selectable resolutions
Suitable for-2-phase and 4-phase motors
Dip switch current setting 8 different values
Pulse frequency up to 200khz
Dip switch current setting 8 different values
Small size (122.2*90*33), weight:0.3kg
SD-2H086MB
Features
Low cost and good high-speed torque
14 selectable resolutions
Supply voltage up to +80VDC
Suitable for-2-phase and 4-phase motors
Output current up to 5.86A
Dip switch current setting 8different values
Optically isolated input signals
Pulse frequency up to 200KHz
Automatic idle-current reduction
Small size (107*97*48),Weight:1KG
SD-2H044MA
Features
Low cost and good high-speed torque
Supply voltage up to +45VDC
Output current up to 5.86A
Optically isolated input signals
Automatic idle-current reduction
14 selectable resolutions
Suitable for-2-phase and 4-phase motors
Dip switch current setting 8 different values
Pulse frequency up to 200KHz
Dip switch current setting 8 different values
Small size (122.2*90*33),Weight:0.3KG
Q2HB88M
Features
(1) High performance, low price
(2) Two group 32 channels constant angel and constant torque subdivision. Highest subdivision: 480
(3) The motor phase current is reduced to set current value 100 ms after receiving the last pulse edge
(4) Bipolar constant current chopping circuit
(5) Opto-isolated input/output
(6) Driven current is adjustable continuously from 0.5A/phase to 8A/phase (0.4A/phase to 6.4A/phase)
(7) Single power supply, voltage arrange from DC24/V to 80V (DC40V to130V)
(8) Highest response frequency: 200Kpps
(9) Over voltage protection, overheat protection, over current protection
