Application:
Crane rails are designed for carrying heavy loads and are used in the laying of crane track for port building.Compared with the railway's heavy rail, crane rail height is low and head width thick waist size is bigger.
Gantry Crane is divided into truss type and box girder type, widely used in workshop, construction site, concrete girder yard, shipyard and port etc. the designer can design various different types Gantry Crane based on the lifting weight, span and use height. According to the lifting weight, the main beam of Gantry Crane is divided into single beam and double beam. The lifting system will be winch trolley and electric block system.The operating system can be designed as operation room and remote control according to customer needs. The safety level can bvary according to the place of use and the customer requirements.
Application:
The crane rail is a crane running route laid by rails, which ensures that the crane runs along the prescribed route and transmits the wheel pressure to the foundation. Crane rail can be divided into light rail type (P) and heavy rail type (QU). Small tonnage, medium tonnage crane rail uses P-type railroad rail, large tonnage gantry crane rail uses QU type crane special rail or square rail.
This equipment is suitable for the old and new switching operation of rail, switch rail and frog point rail. There are running wheels in the center of both sides, which can be carried out during transportation. It has the characteristics of adjustable height, lateral adjustment, locking, light weight, convenient handling and wide application range.
The equipment can be equipped with section rail transport trolley, rail transport, switch rail and frog point rail operation trolley. The wheels are nylon wheels with good insulation performance and equipped with brake device. It is safe and reliable with light weight and high operation efficiency. It is an ideal special tool for rail transport in construction operation of Railway Public Works Department.
2.� Main� Technical� Parameters
Rated load � 1T (one group)
Load-bearing 500kg
Stroke length � 1M
Overall dimension 2410*700*1540mm
Weight (one set) � 97 kg
Single unit weight � â?¤23 kg
Trolley weight 28 kg
3.� Basic� Structure� and� Working� Principle
Working Principle:
The rail gantry crane adopts the principle of gear and rack, and the gear side is equipped with safety insurance, which can avoid reverse rotation when the gravity is large, so as to prevent danger. The rail can be lifted by connecting the rail clamping hook at the bottom of the rack. Release the locking handle, and then push the rail lifting device through the guide rail of the fixed frame to realize the lateral movement.
The whole frame structure is adopted for the section rail transportation trolley, and nylon running wheel is set at the bottom, which has good insulation performance. The brake pad is set inside the wheel, and the running wheel can be braked through the handle cable.
Basic Structure:
The rail gantry crane is composed of column (support frame), cross beam, rail hook, rack, operating handle, locking handle, locating pin, safety hook, etc.
The trolley is composed of running wheel, brake pad, brake cable, brake handle, pushing handle, rack, locking plate, etc
The GB steel crane rail are widely used for crane trolley, lifting trolley.We can supply the whole workable fasteners, such as weld rail clamp and rubber pad.
Gantry Crane Rail Changer
This equipment is suitable for the old and new switching operation of rail, switch rail and frog point rail. There are running
wheels in the center of both sides, which can be carried out during transportation. It has the characteristics of adjustable
height, lateral adjustment, locking, light weight, convenient handling and wide application range.
The equipment can be equipped with section rail transport trolley, rail transport, switch rail and frog point rail operation
trolley. The wheels are nylon wheels with good insulation performance and equipped with brake device. It is safe and reliable with light weight and high operation efficiency. It is an ideal special tool for rail transport in construction operation of Railway Public Works Department.
Details Images
LX Single Girder Suspension Hanging Overhead Crane
Production Description
Single beam hanging overhead crane is a light duty track traveling crane with trajectory, composed of girder weld by steel plate and I-steel, end girder, electric hoist and electric treadmill. It can be hung on the I-beam orbit on the top of the workshop, with the cantilever of 0.5~1m long.
The electric hoist runs along the lower flanges of the I-steel of girder to accomplish article hoisting, featuring dexterous structure and easy installation and maintenance.
This product adopts ground controlling and works at a temperature of -25~+40 degree.
It is prohibited to use in the environment in combustible,explosive or corrosive environment.
Application Areas
It is very convenient for application in loading, unloading, and moving iron or steel blocks, cylinders and so on. Permanent Magnetic crane are the most ideal lifting facility for factories, docks, warehouses and transportation, it also role in metallurgy, mining, machinery industry, transportation etc.
