i) Used for sample-to-result SARS-CoV-2 detection in less than 60 minutes with only 3 minutes hands on time ii) There is no need for any instrument other than real-time PCR devices such as nucleic acid extraction robots, microcentrifuges and incubators. iii) Compatible with wide range of real-time PCR instruments produced by Roche, Bio-Rad, Qiagen, Thermo and BMS.
FINGERTIP PULSE OXIMETER Parameters: Two parameters:SPO2, Pulse Rate. Waveforms: SpO2 Waveform. Features: 1 COLOR OLED display, four direction adjustable. 2 SpO2 and pulse monitoring, and Waveform display. 3 With menu operation. 4 With beep and alarm. 5 Low-power consumption, continuously work for 50 hours. 6 Small in size, light in weight, and convenient to carry. 7 Low voltage alarm display, Auto power-off. 8 Runs on standard AAA batteries. Detailed descriptions of product functions: SPO2: 1 Measurement range: 70%-99% 2 Accuracy: �±2% on the stage of 70%-99%, unspecified(
We are the authorized distributing partner of the South Korean diagnostic manufacturer BioTNS. Our role is to distribute in South Korea and overseas the Covid-19 RT-PCR PNA kits. 1 kit allows you to test 100 patients. - CE approved - US FDA approved Contact us to receive your quotation.
Supplier: Covid RT PCR test kit, 3 ply surgical mask, 3 ply medical mask, kn95, n95, reusable mask, alcohol disinfectant wipes, hand sanitizers, nitrile gloves latex gloves, luer slip syringes, medical gowns PPE supplies and etc
DiaPlexQ Novel Coronavirus (2019-nCoV) Detection Kit Real-Time OneStep RT-PCR based assay system for detection of SARS-CoV-2 [Product Approval] U.S FDA EUA, Health Canada IO, CE-IVD marked The DiaPlexQ Novel Coronavirus (2019-nCoV) Detection Kit is a real-time reverse transcriptase (RT)-PCR test intended for the qualitative detection of nucleic acid from SARS-CoV-2 in nasopharyngeal swabs, oropharyngeal (throat) swabs, anterior nasal swabs, mid-turbinate nasal swabs, nasal aspirates, nasal washes, bronchoalveolar lavage (BAL) fluid and sputum from individuals suspected of COVID-19 by their healthcare provider. Results are for the identification of SARS-CoV-2 RNA. The SARS-CoV-2 RNA is generally detectable in respiratory specimens during the acute phase of infection. Positive results are indicative of the presence of SARS-CoV-2 RNA; clinical correlation with patient history and other diagnostic information is necessary to determine patient infection status. The agent detected may not be the definite cause of disease. Positive results do not rule out bacterial infection or co-infection with other viruses. Negative results do not preclude SARS-CoV-2 infection and should not be used as the sole basis for patient management decisions. Negative results must be combined with clinical observations, patient history, and epidemiological information. The DiaPlexQ Novel Coronavirus (2019-nCoV) Detection Kit is intended for use by qualified clinical laboratory personnel specifically instructed and trained in the techniques of real-time PCR and in vitro diagnostic procedures.
CareStart Covid-19 Antigen Test Kits-Rapid Test Kits Worldwide Shipping Lateral flow assay Detect SARS-CoV-2 nucleocapsid protein antigen Rapid results within 10-15 minutes Intended at POC setting (i.e., inpatient care settings) by medical professionals operating under a CLIA Certificate of Waiver, Certificate of Compliance, or Certificate of Accreditation For use under the Emergency Use Authorization (EUA) only For in vitro diagnostic use only For prescription use only For use with direct anterior nasal and nasopharyngeal swab specimens Clinical Performance 93.75% PPAa and 99.32% NPAb when used with a nasopharyngeal swab 87.18% PPAa and 100% NPAb when used with anterior nasal swab aPPA: Positive Percent Agreement, bNPA: Negative Percent Agreement.
Feline Leukemia Test INTENDED USE Feline Leukemia Virus AG Rapid Test is a sandwich lateral flow immunochromatographic assay for the qualitative detection of Feline Leukemia Virus antigen in cat's blood. Assay Time: 5-10 min Sample: Serum,Plasma or Whole Blood Feline Leukemia Test PRINCIPLE Feline Leukemia Virus AG Rapid Test is based on sandwich lateral flow immunochromatographic assay. The test device has a testing window. The testing window has an invisible T (test) zone and C (control) zone. When sample is applied into the sample hole on the device, the liquid will laterally flow on the surface of the test strip. If there is enough feline leukemia virus antigen in the sample, a visible T band will appear. The C band should always appear after a sample is applied, indicating a valid result. By this means, the device can accurately indicate the presence of feline leukemia virus antigen in the sample. Feline Leukemia Test KIT COMPONENT 1. Foil pouches, each containing one cassette, one pipette and a desiccant 2. Assay buffer (2.0 mL) 3. Centrifugal tubes 4. Product Manual Feline Leukemia Test TEST PROCEDURE 1. Take cat's blood, serum or plasma as sample. 2. Take out the cassette from the foil pouch and place it horizontally. 3. Drip 1 drop of sample and immediately drip 2 - 3 drops of assay buffer into the sample hole "S". 4. Interpret the result in 10-15 minutes. Result after 15 minutes is considered as invalid.
One Step Fecal Occult Blood (FOB) Rapid Test Cassette (Feces) Cat. No.: RH0301T INTENDED USE The One-Step Fecal Occult Blood (FOB) Diagnostic Kit is a qualitative detection of human occult blood in feces forself-testing. PRINCIPLE The One-Step Fecal Occult Blood (FOB) Diagnostic Kit is an immunochromatographic sandwich method, which employ two specific monoclonal antibodies to selectively identify hemoglobin in test samples. The result is very specific, and easier to interpret than those of guaiac-based test. The sensitivity is very high with the ability to detect 200ng/ml hemoglobin in feces. In addition, the accuracy of the test is not affected by interfering substances, and dietary restriction is not necessary. STORAGE The kits should be stored at temperature 4-30�°C, the sealed pouch for the duration of the shelf life (24 months). Do the test in 1 hour after open the pouch. WARNING AND PRECAUTIONS 1. For in vitro diagnostic use only. 2. Do not use kit beyond the expiration date. 3. Patient specimens may contain infectious agents and should be handled as though capable of transmitting disease. Wear disposable gloves throughout the specimen collection and assay procedures. 4. The test device should not be reused. REAGENTS AND MATERIALS PROVIDED 1. One pouched cassette with desiccant. 2. One operating Instruction MATERIALS REQUIRED BUT NOT PROVIDED 1. Clock or Timer SPECIMEN COLLECTION AND PREPARATION 1. Collect stool sample by using the sample collection device provided. 2. Unscrew the top of the sample collection device, take out the sample collection stick, and collect the sample by dipping the stick into 3 different places of the stool sample. 3. Put the sample collection stick back in the sample collection device and screw together tightly. 4. If the sample cannot be tested on the day of collection, store the stool sample at 4C. Bring the specimen to room temperature before testing. ASSAY PROCEDURE 1. Remove the test device from foil pouch by tearing along the notch. 2. Specimen collection. Please see also SAMPLE COLLECTION AND PREPARATION 3. Shake the sample collection device several times. 4. Holding the sample collection device upright, carefully unscrew the tip of collection device. 5. Squeeze 2-3 drops of the sample solution on the test sample pad. 6. Read the test results in 5 minutes. INTERPRETATION OF RESULTS Negative: Only one colored band appears on the control region (C). No colored band in the test region (T). Positive: In addition to the control band (C), a distinct colored band also appears in the test region (T). Invalid: If no bands appear, or a test band appears without a control band, the test should be repeated using a new test device.
INTENDED USE The test kit utilize purified Chlamydia Trachomatis Antibody antigen, based on GIFA principle and use indirect method to detect Urea Plasma Urealyticum antibody in human serum. TEST PROCEDURE 1. Remove the test kit and put it at room temperature (for about 20-30mins) before testing. 2. Add 1 drop of Wash Buffer into the hole and allow the liquid soak the membrane completely. 3. Add 150�l of the serum specimen into the hole and allow it to sufficient absorption. 4. Add 3 drops of Colloidal Conjugate into the hole and allow it to sufficient absorption. 5. Add 3 drops of Wash Buffer into the hole and allow it to sufficient absorption. Read the results within 3 minutes. STORAGE The kit can be stored at room temperature (2-30°C). The test kit is stable through the expiration date (18 months) marked on the foil pouch. DO NOT FREEZE. Do not store the test kit in direct sunlight.