STEMOL PW-35 (PCE POWDER) The product was powdered polycarboxylate superplasticizer with high performance of water-reducing and slump retention It has the benefits as follow: 1. High water reducing rate could achieve 25% above, under the conditions of mixing the concrete with the same ratio of the water, the product could improve fluidity greatly. 2. Liquid polycarboxylate superplasticizer is available by diluting the product with just water. 3. The index of performance for this product is the same with the index of pumping agent. 4. It is convenient during use & can meet the requirement of building plants in remote area by mixing the product with water. 5. The product has the features of uniforms particles, lower moisture content, excellent solubility, high range water reducing, high slump retention and so on. TECHNICAL PARAMETER ITEMS INDEX APPEARANCE WHITE TO YELLOW POWDER WATER REDUCING RATE % >25 SLUMP RETENTION 2 HR MM 450 PH VALUE 7.0 - 9.0 MOISTURE
JSS-BM is a chloride-free,alkali-free and green environmentally friendly product. It is a concentrated product,with high water-reducing rate, good slump retention ability and good adaptability. Moreover, it can improve the strength and durability of the concrete. Product characteristic 1.High water reduction rate: The water reducing rate of concrete is above 35%; 2.The slump retention and water-reducing performance are balanced; 3.Good adhesion:Making concrete have excellent workability, non-layer,without segregation and bleeding; 4.Wide adaptability:It is compatible with ordinary silicate cement,silicate cement,slag silicate cement and all kinds of blending having excellent dispersibility and plasticity; 5.Good strength and durability: Low shrinkage rate,alkali and chloride-free can enhance concrete strength and durability; 6.Environmental friendly product; 7.Good stability: this product is good for long-term storage and without layer and sediment. Scope of application JSS-BM is especially suitable for high strength concrete for railway, traffic, bridge and electric power and so on. It is suitable for the preparation of high strength, high durability, self-compacting, steel fiber and self-leveling concrete. Method of use & notes 1.JSS-BM is concentrated product and it is not suggested to be used directly. 2.The recommended dosage is 1.45%~2.2% after JSS-BM has been compounded. 3.As the construction requirements and raw materials are different, so,concrete mixing test should be made before using in order to insure concrete quality. Package:IBC tank
Polycarboxylate superplasticizer 50% (High water reducing type) Polycarboxylate superplasticizer is a new generation of high performance polycarboxylic acid superplasticizer was prepared from methyl allyl alcohol polyoxyethylene ether macromonomer by free radical polymerization, it is containing 50% solid content. It has a higher water reduction rate and a certain slump protection function, to ensure the excellent working performance of concrete, higher strength and excellent durability, mainly used for export, transport distance is relatively long mother customers. Product Feature: 1.The higher water reduction rate can reach more than 40%. 2.Low viscosity and low thixotropy, It is more suitable for concrete with low water cement ratio
Polycarboxylate superplasticizer is the third-generation high-performance water-reducing agent developed after the general water-reducing agent represented by lignosulphonate and naphthalene superplasticizer. 1. Good compatibility with various cements,good slump retention performance of concrete,and extend construction time of concrete. 2. Low dosage,high water reduction,small shrinkage. 3. Greatly improve the early and late strength of concrete. 4. The product has low chloride content and low alkali content,which is beneficial to the durability of concrete. 5. The production process of this product is non-pollution and does not contain formaldehyde. 6. Using polycarboxylate superplasticizers,more slag or fly ash can be used instead of cement to reduce costs.
Polycarboxylate Superplasticizer is the newest generation superplasticizer used for concrete in domestic and abroad.It is based on molecular designs and adsorption capacity of polycarboxylate,we do R&D and successfully produce water reducing and retention type polycarboxylate superplasticizer for concrete.With initiating systerm and reaction conditions,we achieve high adaptability.Comparing with PNS and other superplasticizer, superplasticizer has many characteristic advantages in technology and performance as following: (1) low dosage, high rate of water reducing; (2) keep concrete good slumption retention; (3) good compatibility with cement; (4) small shrinkage of concrete to keep the stability of volume and durability; (5) environmental in production and usage. Base on above advantages.
Polycarboxylate Based Superplasticizer is the third generation concrete plasticizer which advance developed from lignosulfonate calcium type and naphthalene type plasticizer. Polycarboxylate is the latest liquid type superplasticizer with slump retention performace developed from superplasticizer. Polycarboxylate is a modify liquid type superplasticizer researched by new technology.it is a greeen environmental product with good comprehensive index and no pollution.
Neutralized with alkali/alkanolamine performs as very effective ferrous metal corrosion inhibitor for steel,cast iron,ferroalloy etc. Applied in all types of water based systems Metalworking fluids(semi-synthetic and synthetic) Water treatment processes Press waters Industrial cleaners Off-shore lubricants Water based hydraulic fluids Water/glycol cooling systems
High Slump Retention. PCE-High Slump Retention is a new generation superplasticizer for concrete. It contains polycarboxylate ether polymers and is specially formulated for ready-mix concrete where slump retention, high strength and durability are required in hot climates. It is chloride-free, meets SS EN 934, Set retarding/high range water reducing/superplasticizing admixtures, and ASTM C 494 requirements for Type F & G. It is also compatible with all cements meeting the ASTM standards. As an ideal admixture for the ready-mixed concrete industry, PCE superplasticizer has the ability to work with a low water/cement ratios and still obtain extended slump retention to make high-quality concrete.
TPEG Chemical Nameï¼? 3-methyl-3-buten-1-ol polyoxyethylene ether Classification: Nonionic surfactant Product Specificationï¼? Appearance (25â??) White or yellow flake solid Hydroxyl value (mgKOH/g) 22.0-27.0 Moisture content (%) â?¤0.8 Iodine value (gI2/100g)9.5 PH valueï¼?1% aqueousï¼?205.0-7.0 Properties / Applicationsï¼? 1. This product has good water solubility; high retention rate of double bonds,comb-like molecular structure, large degree of freedom, designed molecular structure, can create the required high performance water reducer by the simple synthesis process. 2. It is polymerized into water reducer with low dosage, high water reducing rate, better performance, durability, no corrosion , friendly to environment, and so on. Packagingï¼? 25 KG Plastic Bag
Polycarboxylic acid superplasticizer is a high-performance water reducer and a cement dispersant in the application of cement concrete. It is widely used in highway, bridge, dam, tunnel, high-rise building and other projects. This product is green, non flammable, non explosive, and can be safely transported by train and car. polycarboxylic acid superplasticize, because it truly designs an effective molecular structure based on the action mechanism of dispersed cement, has a super dispersive type, can prevent the loss of concrete slump without causing obvious retarding, plays a high plasticizing effect at low dosage, has good liquidity retention, the cement is adaptable to a wide range of molecular structures, has a large degree of freedom, many synthesis technologies, and has a lot of room for high-performance, and has a significant strengthening effect on concrete, It can reduce the shrinkage of concrete, and the content of harmful substances is extremely low. The technical performance characteristics give concrete excellent construction workability, good strength development, excellent durability. polycarboxylic acid superplasticize has good comprehensive technical performance advantages and environmental protection characteristics, which meets the needs of modern concrete engineering. Therefore, polycarboxylic acid superplasticize is gradually becoming the preferred admixture for preparing high-performance concrete. 1. It has good compatibility with all kinds of cement, good slump retention performance of concrete, and prolongs the construction time of concrete. 2. Low dosage, high water reduction rate and small shrinkage. 3. Greatly improve the early and late strength of concrete. 4. This product has low chloride ion content and low alkali content, which is conducive to the durability of concrete. 5. The production process of this product is pollution-free, formaldehyde free, in line with ISO14000 international standards for environmental protection management, is a green environmental protection product.