STEMOL PW-35 (PCE POWDER)
The product was powdered polycarboxylate superplasticizer with high performance of water-reducing and slump retention It has the benefits as follow:
1. High water reducing rate could achieve 25% above, under the conditions of mixing the concrete with the same ratio of the water, the product could improve fluidity greatly.
2. Liquid polycarboxylate superplasticizer is available by diluting the product with just water.
3. The index of performance for this product is the same with the index of pumping agent.
4. It is convenient during use & can meet the requirement of building plants in remote area by mixing the product with water.
5. The product has the features of uniforms particles, lower moisture content, excellent solubility, high range water reducing, high slump retention and so on.
TECHNICAL PARAMETER
ITEMS INDEX
APPEARANCE WHITE TO YELLOW POWDER
WATER REDUCING RATE % >25
SLUMP RETENTION 2 HR MM <120
BULK DENSITY >450
PH VALUE 7.0 - 9.0
MOISTURE <5
AIR <2.7
ALKALI <5
CHLORIDE <0.6
FINENESS, 50 MESH < 15%
MAIN PERFORMANCE:-
1. High water reducing rate: It could achieve 25% above, under the conditions of mixing the concrete with the same ratio of the water, the product could improve fluidity greatly.
2. High slump retention performance: Normally carboxylic groups is damaged of ordinary polycarboxylate superplasticizer by the high temperature during dry spray process, this product takes the special process so protect the carboxylic groups and achieve the excellent slump retention ability.
3. Excellent solubility and fast solvability: Due to uniform particles, the specific area is larger, so the product is dissolved quickly in the water then no impurity after dissolving
DOSAGE
0.2~0.3% of the aggregate material, it is instead of liquid polycarboxylate superplasticizer after dissolving the dosage after dissolving reference to the actual solid content of dissolving liquid.
[Technical Indicators] 1. Industrial grade Indicator Name/Indicator Value Powdered Products (F) Needle Products (Z) Level 92 Level 93 Level 95 Level 92 Level 95 Appearance White or light yellow powder, without caking White or yellowish needle-like, without lumps Active matter,% 92.0 93.0 95.0 92.0 95.0 Free oil,% 1.2 1.2 1.2 2.0 1.5 Inorganic salt,% Sodium sulfate 5.8 4.8 2.5 4.8 2.5 Sodium chloride 0.15 0.15 0.15 0.15 0.15 Moisture,% 2.0 2.0 2.0 4.0 3.0 PH value (1% aqueous solution) 7.5-9.5 7.5-10 Whiteness (WB), 90 2. Toothpaste grade Indicator Name/Indicator Value Toothpaste Grade (Y) (I) Level (II) Level (III) Level Appearance White or yellowish powdery or needle-like, without caking Active matter,% 95.0 93.0 93.0 Free oil,% 1.2 1.2 1.2 Inorganic salt,% Sodium sulfate 2.5 3.2 4.0 Sodium chloride 0.15 0.15 0.15 Moisture,% 2.0 2.0 3.0 PH value (1% aqueous solution) 8-9.3 8-9.3 8-10 Whiteness (WB), 90 Foaming capacity/mm 180 Heavy metal (as Pb)/ (mg/Kg), 15 Arsenic content (as As)/ (mg/Kg), 3 Total bacterial count/ (CFU/G), 100 Total number of molds and yeasts/ (CFU/G), 100 Fecal coliforms/G Not to be detected Pseudomonas aeruginosa/G Not to be detected Staphylococcus aureus/G Not to be detected  3. Latex grade Indicator Name/Indicator Value Latex grade (powder, needle, liquid) Aggregate grade Seed level Liquid K12 Appearance White or yellowish powdery or needle-like, without caking Light yellow transparent liquid Active matter,% 94.0 92 28.5-30.5 Free oil,% 0.8-1.0 1.5-2.0 1.5 Inorganic salt,% Sodium sulfate 3.0 3.0 1.5 Sodium chloride 0.15 0.15 0.05 Moisture,% 3.5 3.5 - PH value (1% aqueous solution) 8-10 7.5-9.5 Whiteness (WB), 90 - Color Klett (30% active), - 60 4. Reagent grade Indicator Name/Indicator Value Reagent grade Level 99% Level 97% Appearance White flaky crystals White powder Solubility (1%, alcohol) Completely dissolved Solubility (10%, aqueous solution) Completely dissolved Chroma APHA (20%, deionized water), 15  - Active matter (%), â?¥ 99 (on dry basis) 97 Petroleum ether soluble matter (%), 0.2 1.0 Sodium sulfate (%), 0.5 1.5 Sodium chloride (%), Moisture (%), 1.0 2.0 PH value (1% aqueous solution) 6.0-8.0 6.0-11 Phosphate, 1ppm - Lead (Pb), 2ppm Iron (Fe), 1ppm Nitrogen, 5ppm - Arsenic (As), 0.1ppm Fraction content (%), 99.0 Absorbance (3%, deionized water) 230nm 0.4 260nm 0.1 280nm 0.1 - 410nm 0.01
JSS-BM is a chloride-free,alkali-free and green environmentally friendly product. It is a concentrated product,with high water-reducing rate, good slump retention ability and good adaptability. Moreover, it can improve the strength and durability of the concrete. Product characteristic 1.High water reduction rate: The water reducing rate of concrete is above 35%; 2.The slump retention and water-reducing performance are balanced; 3.Good adhesion:Making concrete have excellent workability, non-layer,without segregation and bleeding; 4.Wide adaptability:It is compatible with ordinary silicate cement,silicate cement,slag silicate cement and all kinds of blending having excellent dispersibility and plasticity; 5.Good strength and durability: Low shrinkage rate,alkali and chloride-free can enhance concrete strength and durability; 6.Environmental friendly product; 7.Good stability: this product is good for long-term storage and without layer and sediment. Scope of application JSS-BM is especially suitable for high strength concrete for railway, traffic, bridge and electric power and so on. It is suitable for the preparation of high strength, high durability, self-compacting, steel fiber and self-leveling concrete. Method of use & notes 1.JSS-BM is concentrated product and it is not suggested to be used directly. 2.The recommended dosage is 1.45%~2.2% after JSS-BM has been compounded. 3.As the construction requirements and raw materials are different, so,concrete mixing test should be made before using in order to insure concrete quality. Package:IBC tank
Carbomer 1.Carbomer (carbomer) is a high molecular weight polymer of acrylic acid bonded with pentaerythritol allyl ether or allyl sucrose. Calculated according to the dry product, the carboxylic acid group (-COOH) should be 56Chemicalbook.0%ï½?68.0%. Carbomer is a very important rheology modifier. The glue combined with water is acidic. The neutralized carbomer is an excellent gel matrix, which is important for thickening and suspension. 2.Carbomer (Carbomer) is a pentaerythritol and other resin that is linked with deformation. It is a very important and fantastic rheological modulated chemistry book section. The neutralized carbomer is an excellent spring limit. , There are important processes such as thickening and suspension, simple, good stability, and a wide range of deep, cream, and medium processes Specification Product Name: Carbomer 940 Appearance White Powder Specification 99% CAS 9007-20-9 Package 1kg/aluminum foil bag; 25kg/drum Sample Availiable Storage Dry Place Shelf life 2 Years Application: Carbomer is used for topical formulations and suitable for preparation of gels, creams and coupling agent. Carbomer and cross-linked acrylic resin as well as series products of these cross-linked polyacrylic acid are widely used at present and are often used in topical lotion, cream and gel. In a neutral environment, Carbomer system is an excellent gel matrix with crystal appearance and nice sense of touch, so Carbomer is suitable for preparation of cream or gel..
Fumaric Acid powder, E297,CAS No.110-17-8, food acidulent, a common food additive included in many processed foods to keep them stable and to add tartness. Fumaric acid is used as a flavoring, because it is the sourest tasting of the organic acids. used as a food acidulent, in Bakery:Tortillas,Breads; Beverages: Fruit Juice Drinks, Wine; Confectioneries:Jellies and Jams;Desserts:Alginate Based Desserts,Gelatin Desserts,Pie Fillings,Egg White Foams; Animal Feed and Industrial Uses. As an experienced Fumaric Acid manufacturer and supplier, we has been supplying and exporting Fumaric Acid for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Fumaric Acid Food Grade Specification DESCRIPTION White, odorless granules or crystalline powder. It is soluble in alcohol, slightly soluble in water and in ether, and very slightly soluble in chloroform Chemical Name Trans-butenedioic acid Chemical Formula C4H4O4 Structural Formula Molecular Weight 116.07 Solubility (g/100g) in water at 25 0.7 in water at 100 9.8 in alcohol at 30 5.76 in dimethyl benzene at 20 0.03 SPECIFICATION (Executive Standard: GB 25546-2010,also meets the international standards of FCC,USP ect.) Assay(as C4H4O4) 99.5%~100.5%(anhydrous basis) Melting Point 294~300 Arsenic(as As) 2mg/kg Max Lead 2mg/kg Max Maleic Acid 0.1% Max Residue on Ignition 0.1% Max Water 0.5% Max
Product Name: MONOBENZONE Other Name: HYDROQUINONE MONOBENZYL ETHERï¼?PBP Molecular Formula: C13H12O2 Molecular Weight: 200.23 Appearance: Off-white powder Kinds: monobenzone cream 60; monobenzone cream 40; pure powder 98% CAS Number: 103-16-2 EINECS number: 203-083-3 Supplier: ZHENYIBIO Monobenzone powder(4 Benzyloxy phenol) is a colorless solid and is classified as a monobenzyl ether of hydroquinone.Monobenzone pure is soluble in ethanol,benzene and diethyl ether,but almost insoluble in water.monobenzone uses as a popular raw material for whitening cosmetics and can also be used for private personal health care. It is widely used in skin care products such as gels, essences,lotions,creams,anti-aging and other skin care products.Monobenzone for skin whitening can decompose melanin in the skin and prevent the formation of melanin in the skin.
Product Name: Propyl 4-Hydroxybenzoate INCI Name: PROPYLPARABEN Molecular Formula: C10H12O3 Molecular Weight: 180.2 Appearance: White Crystalline Powder Purity: 99% CAS NO.: 94-13-3 EINECS No.: Supplier: ZHENYIBIO Propylparaben is a colorless and fine crystalline or white crystalline powder, almost odorless and with slightly astringent.Soluble in ethanol, ethyl ether, acetone and other organic solvents, slightly soluble in water.
Product Name: Methyl 4-hydroxybenzoate INCI Name: METHYLPARABEN Molecular Formula: C8H8O3 Molecular Weight: 152.15 Appearance: White to almost white Crystalline Powder Purity: 99% CAS NO.: 99-76-3 EINECS No.: 202-785-7 Supplier: ZHENYIBIO Methylparaben is a colourless crystalline powder that is odourless or has a faint characteristic odour and a slight burning taste. Slightly soluble in water, easily soluble in ethanol, ether, acetone and other organic solvents.
Product Name: Methyl-Beta-Cyclodextrin; beta-Cyclodextrin methyl ethers INCI Name: METHYL CYCLODEXTRIN Molecular Formula: C54H94O35 Molecular Weight: 1303.3 Appearance: White to off-white powder Purity: 99% CAS NO.: 128446-36-6 EINECS No.: 1308068-626-2 Supplier: ZHENYIBIO Methyl-�²-cyclodextrin is a cholesterol-removing agent mainly used for lipid raft disruption. It may also be used for detergent removal from protein-lipid-detergent ternary mixture to produce 2D membrane protein crystals due to its high solubility and affinity for detergents generally used in membrane protein chemistry.
Product Name: Creatine Monohydrate Other Name: N-GUANYL-N-METHYLGLYCINE;N-GUANYL-N-METHYLGLYCINE, MONOHYDRATE;N-METHYL-N-GUANYLGLYCINE MONOHYDRATE Molecular Formula: C4H11N3O3 Molecular Weight: 149.15 Appearance: White to yellow Crystalline Powder Purity: 99% Property: White crystal or powder,slightly soluble in water,insoluble in ethanol,ethyl ether CAS Number: 6020-87-7 EINECS number: 611-954-8 Packing: 25Kg cardboard drum/carton/paper bag Supplier: ZHENYIBIO Uses: Pharmaceutical ingredient, health product additive. Restrain the generation of fatigue,Lighten fatigue and nervous, Recover powder. Accelerate composition of protein, make muscle strong and strengthen its elasticity. Reduce the level of cholesterol, blood fat, blood sugar. Improve muscle atrophys situation of middle and old aged, delay aging.
