System Information The electromagnetic flow meter HMF 2110 series is the most common and highly accurate flow measurement device that can be universally used in various measurement fields. Since there is no driving part like a propeller, no trouble is caused due to pressure loss, and the durability is excellent In addition, since the installation is simple with the flange type, even a beginner can easily install it through simple training. The sensor measures the flow rate by direct contact with the fluid,, thus a more reliable flow rate value can be obtained, and the reproducibility is also excellent If you are looking for a flowmeter that can be used with confidence, choose the HMF 2110 series without hesitation. â?? KEY FEATURES Quick Start Self diagnostic Easy Maintenance â?? CHARACTERISTICS â?¢ Due to high stability, popular for water flow measurement â?¢ Excellent durability due to no driving part â?¢ Electrode and lining materials are selected for measuring chemical flow â?¢ There is no pressure drop, which reduces electricity costs. â?? SPECIFICATIONS * Sensor installation method : Flange mounting type (Standard: JIS, DIN, ANSI, etc.) * Accuracy : �±0.2% (flow rate 0.1 m/s or more)0.2% (flow rate 0.1 m/s or more) * Max Minimum Flow : 0.05 m/s ~ 10 m/s (Flow rate by diameter) * Measuring pipe caliber : 6 mm ~ 2,000 mm * Measurable fluid : Water, sewage, wastewater, chemicals, etc. (Conductivity of 5�¼S /cm or more) * Power : 110 ~ 220 V AC / 60 Hz * Operating temperature : Sensor (40 ~ 70 â??), Operation: (18 ~ 60 â??) * Screen display contents : LCD Size: LCD Display 100 x 55, 3 Line, 16 Characters, Instantaneous flow rate (4 digit), accumulated flow rate (9 digit), pressure (4 digit) * Flow display unit : Unit: m3, L, etc. / Directions: Forward & Reverse (-) * Electrode : Hastelloy C * Liner: NBR, Hard Rubber, EPDM * Flange : Carbon Steel * Flow measurement frequency : 1.875 ~ 12.5 Hz * Sensor cable length : 100m * Output signal : 4 ~ 20 mA, Integrated pulse active , Passive (Max 10 kHz), Relay pulse (Max Load 24 V DC / 1A) * Communication and memory : RS 232, RS 485 Modbus 128 Mbyte internal memory: date, time, instantaneous flow rate, accumulated flow rate, Pressure memory interval: 5 seconds ~ 24 hours * Protection class : Sensor unit: IP 68 / Operation unit: IP 65 * Self diagnosis function : Alarm display when empty pipe information and self diagnosis error occur For more details on quality Korean flowmeters, please feel free to visit http://www.hnl-global.com/flowmeter and contact us.
Electromagnetic Flowmeter model No FMF 2500 Manufacturing Unit in Coimbatore
0 integrated / split electromagnetic flowmeter using the latest advanced technology and intelligent measurement algorithm, not only can measure low-conductivity liquid, can also be measured acid, alkali, salt and other corrosive liquids. Widely used in chemical fiber, food, mining and metallurgy, environmental protection, steel, petroleum, pharmaceutical and other fields. The innoMag 300 electromagnetic flowmeter consists of an electromagnetic flow converter and an electromagnetic flow sensor that can be used to measure and record the volumetric flow of conductive fluids. Using the latest advanced technology and intelligent measurement algorithm, not only can measure low-conductivity liquid, can also measure acid, alkali, salt and other corrosive liquids.
SKLD type electromagnetic flowmeter is the intelligent electromagnetic with research and development, which adopts domestic and foreign advanced technology. Electromagnetic transducer with high-speed central processing unit (CPU) and the features of rapid computing speed and high precision, reliable performance measurement are in both Chinese and English menu.Electromagnetic flowmeter is divided into one type of electromagnetic flowmeter and split electromagnetic flowmeter,Insert electromagneticflowmeter. Electromagnetic flowmeter can be divided according to the use of function:liquid flow meter,water flow meter,sewage flow meter,Intelligent electromagnetic flowmeter,explosion-proof flow meter,irrigation flow meter,mud flow meter Sensor uses non-uniform magnetic field technology and special magnetic circuit structure. Magnetic field is stable and reliable, and the circuit structure reduces the volume, The sensor can reflect the traffic change timely and effectively, and have a stable value of measuring water, sewage, slurry, pulp, acid, alkali, salt slurry liquid and food, etc. There are lots of wide applications in the petroleum chemical industry, metallurgy, coal, water conservancy project of water supply and drainage, sewage treatment etc. The electromagnetic flowmeter has two types: the compact and the sensor for remote transmitter.
SYSTEM INFORMATION The electromagnetic flow meter HMF 2110 series is the most common and highly accurate flow measurement device that can be universally used in various measurement fields. Since there is no driving part like a propeller, no trouble is caused due to pressure loss, and the durability is excellent In addition, since the installation is simple with the flange type, even a beginner can easily install it through simple training. The sensor measures the flow rate by direct contact with the fluid,, thus a more reliable flow rate value can be obtained, and the reproducibility is also excellent If you are looking for a flowmeter that can be used with confidence, choose the HMF 2110 series without hesitation. â?? KEY FEATURES Quick Start Self diagnostic Easy Maintenance â?? CHARACTERISTICS â?¢ Due to high stability, popular for water flow measurement â?¢ Excellent durability due to no driving part â?¢ Electrode and lining materials are selected for measuring chemical flow â?¢ There is no pressure drop, which reduces electricity costs. â?? SPECIFICATIONS * Sensor installation method : Flange mounting type (Standard: JIS, DIN, ANSI, etc.) * Accuracy : �±0.2% (flow rate 0.1 m/s or more)0.2% (flow rate 0.1 m/s or more) * Max Minimum Flow : 0.05 m/s ~ 10 m/s (Flow rate by diameter) * Measuring pipe caliber : 6 mm ~ 2,000 mm * Measurable fluid : Water, sewage, wastewater, chemicals, etc. (Conductivity of 5�¼S /cm or more) * Power : 110 ~ 220 V AC / 60 Hz * Operating temperature : Sensor (40 ~ 70 â??), Operation: (18 ~ 60 â??) * Screen display contents : LCD Size: LCD Display 100 x 55, 3 Line, 16 Characters, Instantaneous flow rate (4 digit), accumulated flow rate (9 digit), pressure (4 digit) * Flow display unit : Unit: m3, L, etc. / Directions: Forward & Reverse (-) * Electrode : Hastelloy C * Liner: NBR, Hard Rubber, EPDM * Flange : Carbon Steel * Flow measurement frequency : 1.875 ~ 12.5 Hz * Sensor cable length : 100m * Output signal : 4 ~ 20 mA, Integrated pulse active , Passive (Max 10 kHz), Relay pulse (Max Load 24 V DC / 1A) * Communication and memory : RS 232, RS 485 Modbus 128 Mbyte internal memory: date, time, instantaneous flow rate, accumulated flow rate, Pressure memory interval: 5 seconds ~ 24 hours * Protection class : Sensor unit: IP 68 / Operation unit: IP 65 * Self diagnosis function : Alarm display when empty pipe information and self diagnosis error occur For more details on quality Korean flowmeters, please feel free to visit http://www.hnl-global.com/flowmeter and contact us.
JC091 Insertion Remote Electromagnetic Flowmeter BCST Battery Electromagnetic Flowmeter is a new fluid flowmeter developed based on pipe-type electromagnetic flowmeter. Besides preserving the merits of pipe-type electromagnetic flowmeter and considering such defects of pipe-type electromagnetic flowmeter as difficult installation on large pipes and high cost. Compared to ordinary electromagnetic flowmeter, sensor of BCST insertion electromagnetic flowmeter generates external emission magnetic field on outer side. The measuring electrodes are at the ends or on both sides of the sensor. Principle of electromagnetic flowmeter� is shown in the figure below. It is noteworthy that in external emission magnetic field, the induction signal of electromagnetic flow sensor will reduce the linearity of measurement in case of being affected by fluid and thickness of the magnetic field's boundary layer. In terms of� JC091� insertion electromagnetic flowmeter, conducting liquid in pipeline is the conductor moving in magnetic field and distance between two electrodes is the length (L) of conductor.� Accuracy �±0.5%~�±1.5% (under reference conditions) Caliber (mm) DN100~DN3000 DN100~DN3000 Flange Conforming to GB9119, stainless steel Pressure rating 1.6MPa Material of converter housing Die-cast aluminum alloy Material of sensor housing Stainless steel Material of sensor structure Stainless steel/PVDF Weight 6 kg Electrical conductivity ¼s/cm (negotiate with us for ordering in case of less than 5¼s/cm)
Mfld electromagnetic flowmeter is operating based on principle of the electromagnetic induction law of faraday, and the sensor consists of measuring tube, electrode, induction winding, iron core and yoke. It is mainly used to measure the volume flow of the conductive liquid and slurry in a close tube, such as the acid, alkali, salt and other fluid which is easurement will not be affected by the density, viscosity, temperature, pressure and conductivity of the liquid. The lining and electrode materials are manufactured with good corrosion resistance and abrasion resistance. Adopt a novel way e and conductivity of the liquid. E program is reliable; 7. The measuring system is bidirectional and three integrators inside: positive total, reverse total and difference value total. The positive total and reverse total are both displayable. It also has multiple ways of output: electric current, pulse; digital communication, hart. 8. The mounting technology of converter is surface mount technology (smt) which possesses self-check and self-diagnose functions. Export standard packing according to buyer's requirements
Mfld electromagnetic flowmeter operates based on the principle of electromagnetic induction law of faraday. Sensor consists of measuring tube, electrode, induction winding, iron core and yoke. It is mainly used to measure the volume flow of the conductive fluid and slurry in a close tube, such as the acid, alkali, salt and other fuild which is high le for the sity, viscosity, temperature, pressure and conductivity of the fluid. 2. There is no obstacle or loss of pressure in the measuring tube. Low requirements for straight tube. 3. The range of caliber is dn15~dn3000, multiple choices are available for the lining of converter and the material of electrode. 4. Adopt a novel way of excitation. Low power consumption, stable zero point and high accuracy. The volume flow range could be up to 1500:1 5. Sensor and transmitter can be made up into two forms: compact-type and remote-type; Export standard packing according to buyer's requirements
Lde electronic magnetic flowmeter is mainly used in oil, chemical industry, metallurgy and other fields. And it can be measure the liquid which conductivity is equal or greater than 5us/cm. There is no moving parts or loss of pressure in the close tube and the measurement will not be affected by the density, viscosity, temperature, pressure and conductivity of the liquid. The lining and electrode materials are manufactured with good corrosion resistance and abrasion resistance. Adopt a novel way of excitation. Low power consumption; stable zero point and high accuracy. This kind of item is applicable for industries like oil, chemical, power supply, textile, food, paper making, environmental protection, water conservancy construction, especially the field of sewage treatment. Individual in polybags, inner plastic boxes, out plywood cartons(wood cartons), any special required packings can be specified as well(customization).
Now, the market of Low Cost Electromagnetic Flowmeter,China supplier 4-20ma output digital Magnetic Water Flow Meter Priceis very hot. There exist about 80 factories located in the suburb of Dongtai city in Zhejiang province, the cluster of this industry. But the market there is also filled with chaos. Many companies live on purchasing components to reassemble; some company may think it too troublesome and the work as Briefcase Company to declare that they are manufactures of Diesel industry oil oval gear flow meter of high quality. This situation is worrying. The so-called manufactures do not have their own calibrator at all; leave alone the accuracy of Diesel industry oil oval gear flow meter of high quality. Facing this complicated situation, the chief engineer, Mr. Tu Jianwen, who worked as a senior engineer in Siemens in Germany, came to Shanghai from his hometown Cixi in 2008. He was determined to create the world-class Low Cost Electromagnetic Flowmeter,China supplier 4-20ma output digital Magnetic Water Flow Meter Priceand established Shanghai Cixi Instrument Co. Ltd by the name of his hometown. The Low Cost Electromagnetic Flowmeter,China supplier 4-20ma output digital Magnetic Water Flow Meter Pricewere produced and developed by the technology of Siemens numerical control system. Once upon a time, China, the worlds factory, is always the synonym with the low quality. Especially, the Low Cost Electromagnetic Flowmeter,China supplier 4-20ma output digital Magnetic Water Flow Meter Pricewhich are used to control in automatic process are produced cumbersome and noisy and can not measure the sticky medium. Thus, whether the quality is stable has become users greatest concern. So, sometimes buying Low Cost Electromagnetic Flowmeter,China supplier 4-20ma output digital Magnetic Water Flow Meter Priceis like buying a lottery ticket. Whats more, the quality is left to chance and cannot be guaranteed. That Shanghai Cixi Instrument Co. Ltd has introduced the technology from Siemens in Germany has greatly improved the quality of Low Cost Electromagnetic Flowmeter,China supplier 4-20ma output digital Magnetic Water Flow Meter Priceto the world leading level. To be frank, the accuracy of our products is double higher than the similar products in Japan.
