Shiva Polymers

HDPE:

HDPE cable material

Property Unit
Typical Value
Mass density g/cm 3 0.941-0.959
Melt flow Rate(190 centidegree /2.16kg) g/10min 1.0
Tensile yield strength MPa 19.0
Flexural modulus Mpa 965
Elongation@ break % 400
Impact Embrittlement temperature centidegree MAX -118
Dielectric Constant 100KHZ 2.32
1MHZ 2.31
Loss Tangent 100KHZ MAX 0.0001
1MHZ MAX 0.0001
Volume resistivity OHM-CM MIN 1x10 15
Application
Mainly used for the production of high toughness of the telephone,cable insulation material

LDPE:

Physical Properties Test Method Nominal Value Unit
Density ISO 1183 0.921 g/cm3
Melt Mass-Flow Rate (MFR) ISO 1133 1.9 g/10min
Hardness
Shore Hardness (shore D) ISO 868 45
Mechanical Properties
Tensile Modulus ISO 527-2 175 MPa
Tensile Strength Yield, ISO 527-2 9.0 MPa
Break, 13.0 MPa
Tensile Strain(Break) ISO 527-2 850 %
Modulus of Elasticity Internal Method 250 MPa
Thermal
Vicat Softening Temperature ISO 306/A50 89.0 �°C
Melting Temperature (DSC) DIN 53765 108 �°C
Peak Crystallization Temperature (DSC) DIN 53765 97.0 �°C
Heat of Fusion DIN 53765 110 J/g
Electrical
Volume Resistivity ASTM D257 8.5E+15 ohm â?¢cm
Dielectric Strength ASTM D149 30.0 kV/mm
Dielectric Constant (60Hz) ASTM D150 2.20 %
Dissipation Factor (60 Hz) ASTM D150 0.00050

LLDPE

Properties Test conditon Test method Test data Unit
Density 0.91
MFI 2
Drop impact strength ASTM D-1709 90 g
Elongation ,vertical/horizontal ASTM D-882 600/800 %
tensilestrength,thermal resistance ASTM D-1004 105/95 Kg/cm
elongation ASTM D-638 930 %
tensile strength ASTM D-638 180
tensile strength,vertical/horizontal ASTM D-882 380/350
Vicat softening point ASTM D-1525 103 C
melting point ASTM D-2117 126 C
Turbidity ASTM D-1009 12 %
45 glossness ASTM D-2457 75 %

Application: DS7601 application on PP, textiles, fabrics.

Composition: Polypropylene synthesis

Pipe grade

HDPE /LDPE/LLDPE Injection molding Blowing molding blowing film, Extrusion grade

PE biodegradable plastic blowing film granules

PE black masterbatch

PE filler masterbatch

PE desiccant masterbatch

Granule LDPE/HDPE virgin granules for General Purpose Injection Molding
Features · Good Process Ability, High Stiffness, Homopolymer.
ASTM and ISO Properties
Properties Unit ASTM Test Density 0.900 g/cm³ D1505 MI (230 ºC/2.16 kg) 14 g/10min D1238 Tensile Strength @ Yield 35.3 MPa D638 Elongation @ Yield 10 % D638 Flexural Modulus 1720 MPa D790B Notched Izod Impact Strength @ 230 ºC 25.5 J/m D256A Heat Deflection Temperature @ 4.6 kg/cm² 99 ºC D648 Rockwell Hardness (R-Scale) 97 D785A Water Absorption after 24 hours 0.020 % D570
Fabrication · Equipment Raw or Screw Injection Machine · Techniques Standard Processing Advantages · Good Process Ability · High Stiffness · Good Heat Deflection Temperature · Microwaveable for Food Reheating Purposes Applications · Closures · Containers · Housewares · Medical / Healthcare Applications · Toys · Writing Instruments

i have groups of product ; pp, Hdpe and Ldpe granules plastics recycle 30 metric tons for each type you request every monthly. also, all Double 60 filters types. in addition i have many colours for pp injection plastics recycle granules

Virgin HDPE,LDPE,PP Granules
Film Grade HDPE

Item Test condition Test Method Value Unit
Density ISO 1183 0.944-0.955 g/cm3
MFR 190°C/2.16kg ISO 1133 0.03-0.07 g/10min
Tensile strength at yield ISO 527-2 22 MPa
Elongation at break ISO 527-2 >350 %
ESCR F50,50°C,100% ASTM D-1693A 1000 h
VICAT ASTM D-1525 126 °C


Blowing molding Grade HDPE

Item Test Condition Test Method Value Unit
Density ISO 1183 0.950~0.955 g/cm
MFR 190°C/2.16kg ISO 1133 1.7~2.5 g/10min
Tensile strength at yield ISO 527-2 24 MPa
Elongation at break ISO 527-2 >600 %

HDPE, LDPE & LLDPE Granules Available

Country Of Origin: Iran
Stock Available in : Turkey, Oman & UAE
Production Capacity: 500,000 MT

*Samples available*

Packing Size: 25Kg PP Packing
Please give us your requirements/application with MFI specification to get the best price & material sheet.

Price: $850 - $920*/ MT
IncoTerms: CNF to ASWP
Lead Time: 20- 40 Days
MOQ: 500 MT
Payment Terms: IR/LC , LC, Bank

Please contact us with LOI and POF or ICPO and BCL

Ps. We are Sellerâ??s Mandate. NCNDA & FPA will be signed before SCO from Supplier.

**Serious Buyers Only**

PROCEDURE

1. Buyer Sends LOI & POF
2. Seller Responds with Soft Corporate Offer(SCO)
3. Buyer Issues ICPO with BCL
4. Seller Issues FCO

Please fill in the below Google Forms with your requirement.

We have available HDPE injection and LDPE and PP Granule available for sale we do worldwide delivery, and we are looking for buyers and mandate to work together on a long-term business interested person can contact us.

Specification
item value
Place of Origin UK
Model Number F00952
Product name HDPE LDPE LLDPE Granules
Grade Virgin Film Injection Grade
Material High Density Polyethylene Virgin Granules
Application Packing Containers Films Pipes
Usage General HDPE Plastics
Colour White
Package 25kgs/bag
MOQ 250 Ton
Appearance White Transparent Granular

We manufacture HDPE, LDPE, and LLDPE reprocessed and recycled granules in various colors mainly in black color.

We are well-reputed recycling firm based in Pakistan. We got the experience of three decades in the plastic recycling industry. We supply premium quality HDPE, LDPE, and LLDPE reprocessed and recycled granules. We produce polyethylene granules in bulk and have the capacity to supply larger quantities of the materials.

Being the closest substitutes for virgin resin, these materials are very cost-effective. Our granules could minimize the consumption of exorbitantly high-priced virgin resin. Our HDPE, LDPE, and LLDPE materials have a vast range of applications.


Applications: -

Blow Film Extrusion:

Agriculture Plastic Mulch Film (LLDPE Black Mulch Film)
Garbage Bags
Dog Poop Bags
Polyethylene Shopping Bags
Other Film Extrusion Products

Polyethylene Pipes and Fittings:

HDPE Pipes and Fittings (Closest Substitute for PE 100 and PE 80 Resin)
LLDPE Pipes
LDPE Pipes
Drip Irrigation Systems
Drip Irrigation Pipes and accessories
MDPE Pipes and Fittings

Geosynthetic Products:

Geomembrane liners (HDPE Liners, LDPE Liners, and LLDPE Liners)
Geocells
Geonets
Geogrids
Geocomposites
Other Geosynthetic Products