A gate valve is a type of valve that uses a gate or wedge-shaped disc to stop or start the flow of a fluid. The gate is attached to a stem that is operated by a handle or a wheel, and it can be raised or lowered to open or close the valve. When the gate is fully raised, it allows the fluid to flow freely through the valve. When the gate is fully lowered, it blocks the flow of the fluid. Gate valves are widely used in a variety of applications, including oil and gas, chemical processing, water treatment, and power generation. They are available in a range of sizes and materials to suit different applications and fluid types. In China, gate valves are commonly used in industrial piping systems and are designed to meet Chinese national and industry standards. They are known for their reliability, durability, and ease of use, and they are often used in applications where a tight seal is required to prevent leaks. Like JIS flanged ball valves, gate valves are typically connected to the rest of the piping system using flanges, which are fastened together with bolts or other fasteners. The valve body of the gate valve can be made of metal. Such as: forged steel gate valve, stainless steel gate valve, alloy gate valve, bronze gate valve, cast steel gate valve, carbon steel gate valve, etc. Among them, forged steel gate valves are widely used, especially as a cut-off device when the size is greater than 50mm. The main body can also be made of non-metallic materials. For example, ceramic gate valves have good wear resistance and hardness. Some other gate valves are made of special materials, such as Hastelloy gate valves, special steel gate valves and special alloy gate valves. To transport and process strong corrosive media, duplex stainless steel gate valves or super stainless steel gate valves are usually used to alleviate the problem, because they can work well in areas with corrosive environments.
Metal Seated Lift Plug Valve, ASTM A351-CF8, CF8M, CF3, CF3M Plug valves are valves with round or conically tapered "plugs" which may be rotated within the valve body to manage flow with the valve. The plugs in plug valves have a number of hollow passageways going sideways with the plug, to ensure that fluid can flow with the plug once the valve is open. Plug valves are pretty straight forward and frequently economical. Metal Seal Lift Plug Valve Overview Metal Seated Lift Plug Valve is relevant towards the cutting and connection of pipelines medium that turned on in a variety of industries as oil, chemical industry, pharmacy, chemical fertilizer, power industry etc. under nominal pressure of CLASS150-1500 LbsS, and dealing temperature of -29~550�°C. a. The merchandise has reasonable structure, reliable sealing, excellent performance and delightful appearance. b. Frequent lowering and raising from the valve is transported out as the sealed surface is removed so it won't cause abrasion around the sealed surface. c. The Plug valves's characteristic double-direction flow makes installation and employ easier. d. The types of materials from the parts and dimensions of flanges could be reasonably configured according the particular operation condition from the needs from the clients, in order to satisfy the various needs of engineering. When the lift plug valve comes to procedure for frequent lowering and raising from the valve, when opening the valve, to begin with, turn the hands wheel to help make the plug lifted and separated using the sealed surface, then turn the handle by 900 to help make the funnel of plug towards the funnel of valve body, so the valve is opened up when closing the valve, to begin with, turn the handle by 900 to help make the funnel of plug vertical towards the funnel of valve body, after which turn the hands wheel to descend the plug, so the valve is closed.
API6D Slab Gate Valve API6D gate valve is suitable for transportation pipelines of natural gas, petroleum, chemical, environmental protection, water etc. As a closing device, it also can be used in venting systems and steam storage equipment. According to different occasions, it can be divided into conduit slab gate valve and non-conduit slab gate valve. Specification: ïSize: 2~36 ïPressure Rating: Class150~900LB ïMain Materials: ASTM A216 WCB, WCC, LCB, ASTM A351 CF8, CF8M, CF3, CF3M etc. ïDesign and Manufacture: API6D ïFace-to-Face:ASME B16.10, API6D ïEnds Connection: Flange, Butt Welding ïInspection & Testing: API 598 ïOperator: Manual, Worm Gear, Electric, Pneumatic. Feature: ïFloating Seat ïFull-short Structure ïFire Resistant Design ïDouble Seals ïSingle Disc or Double Disc
Flanges: ansi b 16.5 series 150, din iso pn 10, pn 16, jis 10kface to face dimensions: api 609-iso 5752 (to accommodate insulation)diameter: 1 to 32" (40 mm to 800 mm)temperature range: -40 f (- c)pressure range: empty to 145 psi. (10 bar) Benefits reduced mounting foot print design. light weight and highly resistant minimal load loss (.005%) still fluid is assured by the elastic seat mounting flexibility using ansi, 150, din iso pn 10, pn 16, jis 10k sandards. face to face dimensions api 609-iso 5752 to accommodate 2 insulation standard mounting pad iso 5211 low maintenance cost. small repair kits the design of the seat is anti-displacement that gives long life to the valve total isolation of the one-piece shaft from the fluid flooded area formed by the design of the seat, avoiding the use of stoppers. polished disc diminishes the inlay and erosion external anticorrosive, sanitary protection 1.Wodden case pacakge or as required from customers 2.Seawothy package for plastic valve 3.Air transportation is allowed for plastic valve 4.Any advise from u will be considered about plastic valve Our salers will supervise the package to ensure safe transport
End flange: ansi b 16.1, en 1092face to face: ansi b 16.10nominal pressure:dn40-dn600 pn1.0/1.6mpa(150/200psi) dn700-dn1200 pn1.0mpa(150psi)body: cast iron, ductile iron/wcb/cf8/cf8mdisc: ductile iron/cf8m/cf8, nylonstem: steel, ss416/ss304/316seat: epdm/nbr Main technology parameter Nominal diameterDn(mm)40-800 Nominal pressurePn(mpa)1.01.6 Test pressure(mpa)Shell test1.52.4 Test pressure(mpa)Seal test1.11.76 Appropriate mediumAir, water, sewage, steam, coal gas, oil Drive modalityHandle, worm gear box, penumatic drive, electric drive Typical applications: Heating air-conditioning systems;water purification system; mining industry; shipbuilding; chemical industry; food industry;oil and gas industry, fire extinguishing system, natural gas applications 1.Wodden case pacakge or as required from customers 2.Seawothy package for plastic valve 3.Air transportation is allowed for plastic valve 4.Any advise from u will be considered about plastic valve Our salers will supervise the package to ensure safe transport
The best extra-pressure protection device takes care of press equipments, container and on-line pipe. When mediums pressure rises over the allowed pressure , safety valve will automaticaly open and fully discharge to protectthe equipment from pressure going on rising and will automatically close when the pressure lowers to the setting pressure . The valve bonnet of sealed safety valve prevents dustand foreign matters from invading. Meanwhile protect toxic combustible media from overflowing . The valve bonnet of open safety valve can favor the spring seat in lowering temperature inside of . It is mainly used for the pipeline and container with steam medium . The safety valve with a radiator is suitable for the medium with a temperature over 350 ¡ãc. The safety valve with lever , it makes use of open manually when the media pressure over 75% of setting pressure . Full lift safety valve opening heiht is more than one fourth times of the flow diameter . It has an advantage of discharging greatly . Low lift safety valve valve opening height is between one twentith to one fortiegh times of the flow diameter. 1.Wodden case pacakge or as required from customers 2.Seawothy package for plastic valve 3.Air transportation is allowed for plastic valve 4.Any advise from u will be considered about plastic valve Our salers will supervise the package to ensure safe transport
A gate valve is a type of valve that uses a gate or wedge-shaped disc to stop or start the flow of a fluid. The gate is attached to a stem that is operated by a handle or a wheel, and it can be raised or lowered to open or close the valve. When the gate is fully raised, it allows the fluid to flow freely through the valve. When the gate is fully lowered, it blocks the flow of the fluid. Gate valves are widely used in a variety of applications, including oil and gas, chemical processing, water treatment, and power generation. They are available in a range of sizes and materials to suit different applications and fluid types. In China, gate valves are commonly used in industrial piping systems and are designed to meet Chinese national and industry standards. They are known for their reliability, durability, and ease of use, and they are often used in applications where a tight seal is required to prevent leaks. Like JIS flanged ball valves, gate valves are typically connected to the rest of the piping system using flanges, which are fastened together with bolts or other fasteners. The valve body of the gate valve can be made of metal. Such as: forged steel gate valve, stainless steel gate valve, alloy gate valve, bronze gate valve, cast steel gate valve, carbon steel gate valve, etc. Among them, forged steel gate valves are widely used, especially as a cut-off device when the size is greater than 50mm. The main body can also be made of non-metallic materials. For example, ceramic gate valves have good wear resistance and hardness. Some other gate valves are made of special materials, such as Hastelloy gate valves, special steel gate valves and special alloy gate valves. To transport and process strong corrosive media, duplex stainless steel gate valves or super stainless steel gate valves are usually used to alleviate the problem, because they can work well in areas with corrosive environments.
A gate valve is a type of valve that uses a gate or wedge-shaped disc to stop or start the flow of a fluid. The gate is attached to a stem that is operated by a handle or a wheel, and it can be raised or lowered to open or close the valve. When the gate is fully raised, it allows the fluid to flow freely through the valve. When the gate is fully lowered, it blocks the flow of the fluid. Gate valves are widely used in a variety of applications, including oil and gas, chemical processing, water treatment, and power generation. They are available in a range of sizes and materials to suit different applications and fluid types. In China, gate valves are commonly used in industrial piping systems and are designed to meet Chinese national and industry standards. They are known for their reliability, durability, and ease of use, and they are often used in applications where a tight seal is required to prevent leaks. Like JIS flanged ball valves, gate valves are typically connected to the rest of the piping system using flanges, which are fastened together with bolts or other fasteners. The valve body of the gate valve can be made of metal. Such as: forged steel gate valve, stainless steel gate valve, alloy gate valve, bronze gate valve, cast steel gate valve, carbon steel gate valve, etc. Among them, forged steel gate valves are widely used, especially as a cut-off device when the size is greater than 50mm. The main body can also be made of non-metallic materials. For example, ceramic gate valves have good wear resistance and hardness. Some other gate valves are made of special materials, such as Hastelloy gate valves, special steel gate valves and special alloy gate valves. To transport and process strong corrosive media, duplex stainless steel gate valves or super stainless steel gate valves are usually used to alleviate the problem, because they can work well in areas with corrosive environments.
Special Features: The valve, which is also named separating material machine, is widely used in building material, metallurgy, mining, light industry and food industries etc. It is the ideal equipment to change flow direction of solid crystal and powder material in transportation system. The valve is welded in fine steel and equipped with different actuators according to the different demands. It has the features of lightweight, antifriction, definite indicating direction, handy switching and flexible operation etc. Type is side three-way liuzi, type is face three-way liuzi, type is four-way liuzi. The driving types are five: S denotes manual, D denotes electric, Z denotes automatic, Q denotes pneumatic and Y denotes electric hydraulic
DIN soft seal non-rising gate valve Product Name: DIN soft seal non-rising gate valve Model No.:(DIN)F4Z45X-16Q-100 Brief introduction: Gate valve is one of the widely used industrial valves in fluid transport projects. For traditional gate valves, there are some weaknesses, like fluid leakage, internal corrosion,etc. This resilient soft seal gate valve adopts the novel structure design, strict manufacturing technology, and new materials, which overcomes the defects of traditional gate valves and has reliable sealing performance, long service life, and is easy and convenient to operate and maintain. Characteristics of Soft seal gate valves: 1. overall rubber coated. Ductile iron gate valve has characteristics of overall rubber coated, great sealing Performance, accurate physical dimensions, which can guarantee the zero leakage, long service life, and small flow resistance. 2. light weight. The valve body and valve deck are made of ductile iron, which is light in weight, safe and reliable, easy to install. 3. corrosion resistant. The inside of the valve body is coated with non-toxic epoxy resin, which is anti-corrosive and rust resistant. That kind of gate valve not only can be used for drinking water piping line systems, also can be used for wast water delivery pipe line systems. 4. Triple seal. There are triple O-type sealing rings used for valve stem, which has small frictional resistance, and is easy to open and close.