The best extra-pressure protection device takes care of press equipments, container and on-line pipe. When mediums pressure rises over the allowed pressure , safety valve will automaticaly open and fully discharge to protectthe equipment from pressure going on rising and will automatically close when the pressure lowers to the setting pressure .
The valve bonnet of sealed safety valve prevents dustand foreign matters from invading. Meanwhile protect toxic combustible media from overflowing . The valve bonnet of open safety valve can favor the spring seat in lowering temperature inside of . It is mainly used for the pipeline and container with steam medium . The safety valve with a radiator is suitable for the medium with a temperature over 350 ¡ãc.
The safety valve with lever , it makes use of open manually when the media pressure over 75% of setting pressure .
Full lift safety valve opening heiht is more than one fourth times of the flow diameter . It has an advantage of discharging greatly . Low lift safety valve valve opening height is between one twentith to one fortiegh times of the flow diameter.
1.Wodden case pacakge or as required from customers
2.Seawothy package for plastic valve
3.Air transportation is allowed for plastic valve
4.Any advise from u will be considered about plastic valve
Our salers will supervise the package to ensure safe transport
Description: To ensure safety, the drilling pump is equipped with safety valve in the outlet, which is able to control the ultimate pressure of the pump within the admitted scope. The high pressure safety valve is forged by high quality structural alloy steel. As a kind of protection device and human safety device, it is generally installed on cementing devices, fracturing pump, high pressure operation piping, pressure vessel and devices under high pressure and high flow capacity. It controls elastic force of the valve seat by adjusting the nut on the top. Once the pumping pressure or piping pressure exceeds pre-established pressure value, safety valve opens automatically to release the pressure. When the pressure value reaches the normal value, valve rod will recover the position by spring and close the valve.
To ensure safety, the drilling pump is equipped with safety valve in the outlet, which is able to control the ultimate pressure of the pump within the admitted scope. The high pressure safety valve is forged by high quality structural alloy steel. As a kind of protection device and human safety device, it is generally installed on cementing devices, fracturing pump, high pressure operation piping, pressure vessel and devices under high pressure and high flow capacity. It controls elastic force of the valve seat by adjusting the nut on the top. Once the pumping pressure or piping pressure exceeds pre-established pressure value, safety valve opens automatically to release the pressure. When the pressure value reaches the normal value, valve rod will recover the position by spring and close the valve.
Bronze Safety Valve Rating : Max. BOP 250 PSIG (17.24 Bar) at 435 F (225 C), Set Pressure 250 PSIG Material : Bronze Description : Angle Pattern, Pop Type, Enclosed Dischage Ends : Inlet Screwed Male, Outlet Screwed Female Specials : IBR Item Code : BM000012 Size : 15mm Notes : Available Valve Size : 15mm to 80mm
Ductile Iron Diaphragm Type Pressure Reducing Valve Pressure Rating : PN-16 Material : Ductile Iron Description : Diaphragm Operated, Spring Loaded Ends : Flanged Specials : Maximum Inlet Pressure 16 Bar (Hyd.), Set Pressure 3 to 12 Bar (Hyd.) Item Code : DI000060 Size : 65mm Notes : Available Valve Size : 65mm to 300mm
Carbon Steel Pilot Operated Pressure Reducing Valve Rating : Max. Inlet Pressure 350 PSIG (24.1 Bar) Set Pressure range 5/60, 20/50, 40/125 PSIG for Steam Material : Carbon Steel Description : Pilot Operated, R-Type Trim : SS410 + Stellite Ends : Flanged Specials : IBR Item Code : BM000030 Size : 15mm Notes : Available Valve Size : 25mm to 200mm