Empire Glass And Aluminium

TYPES 1 Cement 42.5 N CEM II/A-L Bulk 2 Cement 42.5 R CEM II/A-L Bulk 3 Cement 42.5 N CEM II/A-L Big Bag 1.5MT 4 Cement 42.5 R CEM II/A-L Big Bag 1.5MT 5 Cement 42.5 N CEM II/A-L NA 442 Bag 50Kg BUNDLED 2,2 MT per pallet 6 Cement 42.5 N CEM II/A-L NA 442 Bag 25kg BUNDLED 2,15 MT per pallet 7 Cement 42.5 N-LH/SR5 CEM I Bulk 8 Cement 42.5 N-LH/SR5 CEM I Bag 9 Cement 52.5 CEM I Bulk 10 Cement 52.5 CEM I Bag Below present our general procedures for the purchase and sale of sugar of Brazilian origin: 1- Buyer issues a Letter of Intention (LOI) addressed to Seller; 2- Seller issues a Soft Corporate Offer (SCO); 3- If Buyer accepts SCO, signs and seals SCO and then sends to Seller; 4- Seller issues Full Corporate Offer (FCO); 5- Buyer signs and seals FCO and issues an Irrevocable Corporate Purchase Order (ICPO), addressed to Seller; 6- Seller issues draft of Sale and Purchase Agreement (SPA) to be discussed and commented; 7- SPA is signed by Seller and Buyer; 8- Buyer issues draft of the Payment Instrument (SBLC/DLC) for approval by Seller�´s Bank; 9- If Seller�´s Bank accepts, Buyer issues the bank guarantee (SBLC/DLC); 10- Seller issues Performance Bond (PB) 2%; 11- Seller prepares the product and export documents; 12- Buyer receives the export documents by mail; 13- Buyer makes payment 100% to Seller ´s Bank through transfer bank (Swift Message MT-103); 14- Shipping; 15- Seller sends the original export documents to Buyer; Please contact for full specs on quantities, delivery terms, etc... NOTES: The financial instrument (SBLC / DLC) must be issued by the Top 50 Bank in the world ranking.

We are leading manufacturer & Exporter of Brass shower header clamp.

we are leading manufacture & exporter of Brass washer

we are leading manufacturer of Brass Lock washer

We Are Leading Manuacturer Of Brass Anchors

Wooden Doors And Door Frames Full KD Prosess WE KNOW WOOD BETTER To get quality pieces of wood is not enough to have high-tech machinery alone. We think about it from the selection of raw materials, pieces of wood by experienced experts in their fields to the process of wood covenants. After we process the raw materials into finished products such as flooring, decking, lumbersharing, stairs, doors, tables, chairs, pergola, gazebos, and various other custom products in accordance with the provisions of the High Standard Quality Control that we have in inspecting each of our production results. The front door is often the focal point of a home exterior a door is the first thing guests see when they arrive, it's the last thing they contemplate after leaving. Pt nifinternasional produces a complete line of wooden door to fit your architectural design, either classic door or modern contemporary door. We also manufacture wood door based on your custom made design.

APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.

Door and door quick installation system. DISCOVER THE INTER-JOIN DIFFERENCE SKIRTINGS ARCHITRAVES DOOR UNITS WINDOW REVEALS THE COMPLETE FINISHING SYSTEM We set-out to improve the quality and efficiencies of the home and apartment finishing process Delivering a higher quality finished product More cost effective than traditional methods Significantly faster, simpler and safer installation process Easy installation of pre-finished and pre-assembled door units Achieve an eco-friendly product made from recycled materials Built-in design tolerances to mitigate the necessity for accuracy Reduction in on-site labour - finishing, painting and tiling Elimination of finishing defects 100% termite resistant finishing material 100% Waterproof We achieved it! The Inter-Join finishing system eliminates all of the quality & labour issues associated with the traditional finishing process Eliminates: Skilled labour associated with hanging doors Eliminates: Skilled labour associated with butt hinges recessed into doors and jambs Eliminates: Labour associated with fitting locks Eliminates: Mitre cuts required for skirting and architraves Eliminates: Gap filling sealant around skirting and architraves Eliminates: Cut-in painting around skirting/walls and architraves Eliminates: Intricate tile cutting of floor tiles and addition of sealant around door jambs Eliminates: Trimming door jamb & window reveals Resulting in increased productivity & cost savings THE INTER-JOIN DIFFERENCE DELIVERING A HIGHER QUALITY FINISHED PRODUCT SIGNIFICANTLY FASTER, SIMPLER AND SAFER INSTALLATION PROCESS MORE COST EFFECTIVE THAN TRADITIONAL METHODS INSTALLATION READY, PRE-FINISHED, AND PRE-ASSEMBLED DOOR UNITS ECO-FRIENDLY PRODUCT MADE FROM RECYCLED MATERIALS BUILT-IN DESIGN TOLERANCES THAT MITIGATE THE NECESSITY FOR ACCURACY REDUCTION IN ON-SITE LABOUR - FINISHING, PAINTING AND TILING ELIMINATION OF FINISHING DEFECTS MATERIALS ARE 100% TERMITE RESISTANT MATERIALS ARE WATERPROOF DOORS, SKIRTING AND ARCHITRAVES ARE FILM WRAPPED FOR PROTECTION All Door Units are pre-finished, assembled and ready for immediate installation Residential door manufactured from completely waterproof composite (WPC & Wooden) material Residential doors are available in varying styles and designs Commercial doors manufactured to precision from high quality Aluminium Composite Panels, entirely processed on our patented, computer operated door machine Residential and commercial hardware available