China sprocket manufacturer, Specialist in: European Series Sprockets, American Series Sprockets, Japan Series Sprockets. Standard Sprocket, Sprocket for Conveyor Chain, Taper Lock Sprocket, Stainless Steel Sprocket, Cast Iron Sprocket, etc. We have the capability to custom design and manufacture specialized sprockets, Please feel free to contact us with any enquiries. Hangzhou Chinabase Machinery Co., Ltd is a group of factories, give customer one stop solution of power transmission and industrial products. We are in the position to supply wide range of products, including chains, sprockets, v-belt and v-belt pulleys, timing belt and timing belt pulleys, gears, speed reducers, motors, racks, couplings, and many other parts, like locking assembly, taper bushing, Chain guide, shaft collar, torque limiter, cam clutch, universal joint, motor base and motor slide, rod end, clevis, rubber mount, etc. We make special parts according to drawings and/or samples.
Usually, sprockets with 12 teeth are used in low-speed bucket elevators (chain speed less than 45 m/min.). High-speed bucket elevators normally require 24-tooth sprockets. It is important to choose a sprocket with suitable pitch-line clearance. Excess conveyed material may accumulate in the bottom of the casing, which can cause accelerated wear. Worn chain and sprockets will not engage correctly; the sprockets may have to be replaced. Sometimes, welding material onto the tooth at the point of excessive wear will restore the sprocket, but it is not recommended. Additionally, this procedure is extremely difficult with the sprocket that is located at the top of the bucket elevator. Even sprockets with hardened teeth are subject to excessive wear in bucket elevators, due to the abrasive nature of conveyed materials. For example, in cement conveyors, there is a point of sprocket hardness at which wear is virtually eliminated. However, it is impractical and expensive to make such hard teeth in standard sprockets. In the 1980s, detachable-tooth sprockets were developed, which permit the replacement of the tooth part only. The body of the sprocket remains on the shaft, which reduces repair time and costs. By using special materials in the tooth insert, high tooth hardness is achievable, and therefore, wear life is increased. Use of detachable-tooth sprockets is increasing, especially in the cement industry.
Sprocket Made from Alloy steel
Roller chain sprockets or conveyor chain sprockets are manufactured in different materials and hardening to best suit the application of the customer. Sprockets are manufactured as per international standards and also as per customers drawings and specifications. Wooden case
Sprocket Sprockets are strictly quality-control and processed by advanced machine in order to maintain the stable structure. Furthermore, they are dealt with middle-frequency quench and normal mechanics dealing to reach qualified hardness and resistance-proof pressure. Thirdly, according to physics, structural mechanics and the accurate machine request, we make sure that each sprocket will operate smoothly and avoid the edge of sprocket slit. Finally, sprockets will be checked in order to reduce the defect of operation. We have dealt in sprocket for many years and export to singapore, malaysia, turkey, brazil. We believe our quality will testify our words.
China sprocket manufacturer, Specialist in: European Series Sprockets, American Series Sprockets, Japan Series Sprockets. Standard Sprocket, Sprocket for Conveyor Chain, Taper Lock Sprocket, Stainless Steel Sprocket, Cast Iron Sprocket, etc. Types depend on use of a hub: Type A(flat type),Type B(single hub),Type C(dual hub). Different teeth numbers are available for every pitch. Materials :steel C45 and stainless steel AISI 304 and Q235,Q345 are available. Surface treatments :such as hardened teeth(45-55 HRC) /Zinc plated/Black oxide can be also carried out for a better wear resistance of the product.
We can produce sprockets according to European Standard,American Standard,Japan Standard and customers's own standard. Types depend on use of a hub: Type A(flat type),Type B(single hub),Type C(dual hub). Different teeth numbers are available for every pitch. Materials :steel C45 and stainless steel AISI 304 and Q235,Q345 are available. Surface treatments :such as hardened teeth(45-55 HRC) /Zinc plated/Black oxide can be also carried out for a better wear resistance of the product. Contact: Kimer Zheng sales2@chinatransmissions.com 0086-18258831202 Nik yu info@chinatransmissions.com nik@mrsprocket.com 0086-18667944319
With quality centric approach, we are involved in providing a wide range of Sprocket Gear. Offered gear is manufactured by highly skilled professionals using premium grade raw material with the aid of contemporary techniques. Owing to its anti-corrosive finish and accurate dimensions features, this gear is made available in different specifications as per clients needs. Moreover, we provide this gear at pocket friendly prices to our clients. Features: Dimensional accuracy Sturdiness Compact size
Power transmissions products. Wooden cases
Dear Sir / Madam We are Gui Zhou GZG Transmission Co.,Ltd. A factory of transmission parts in China, we are mainly manufactured & exported following products: 1) Sprocket Chain (ISO,JIS,BS/DIN,ANSI Pilot Taper-Lock QD type etc.) 2) Roller chain.Conveyor chain.non-standard Chain. 3) Capable Of designing & producing various non-standard transmission parts. if you are interest welcome to visit us www.gzg-transmission.com STANDARD PACKING
