Indochains Pvt Ltd Raipur (india)

Know Us Leveraging on our robust infrastructure and expertise of dexterous workforce, we, IndoChains, are a name to reckon with. Established in the year 1981, we have been successfully catering to the needs of bulk material handling, material conveying, storage, reclaiming & stacking, surface finishing, peening and casting.

Large conveyance: Conveyance of bulk materials in a closed case; cement, chemical, and food industries Flow Conveyor Chain moves bulk materials in a closed case. It conveys the particles horizontally, on a slight incline, or vertically in an arrangement shaped like the letter L. This conveyor is sometimes called a Redler Conveyor. Generally, a flow conveyor is used widely in the conveyance of bulk materials such as cement and fertilizer in chemical industries, and grain in food industries. Because it is enclosed, dust from the conveyed materials is contained, and will not pollute the surrounding area. A flow conveyor is not usually used to move sticky, dusty, or low-density products. A flow conveyor set up to move cement has an average capacity of 300 ton/h and a speed of 35 m/min. Usually one strand of chain is used. Specially shaped attachments with large clearances are installed on small pitch or large pitch conveyor chains. The chain operates in a casing filled with conveyed material, such as grain, flour, or ash. This is based on a phenomenon used in a basic science experiment; when you put sand in a long cylinder, closed at one end with paper, and push the sand with all your strength, the paper cannot be broken if the cylinder is long enough. This is because the friction between the sand and the cylinder absorbs all of the pushing force. Conversely, in the flow conveyor, the attachments work as moving walls, and the sand moves along with it. To lift conveyed objects, the friction at the bottom wall of the conveyor must support the weight of the vertical portion, therefore, the conveyor must have a bottom line "L" shape. Because there is very little relative movement among the conveyed materials in this application, breakage is rare. The case width is determined by the attachment dimensions; usually it is less than 750 mm. Chains for flow conveyors include: RF03075 (average tensile strength, 29 kN) through RF26200 (314 kN) for grain conveyance; RF450W (108 kN) through RF36300N (868 kN) for other applications.

Know Us Leveraging on our robust infrastructure and expertise of dexterous workforce, we, IndoChains, are a name to reckon with. Established in the year 1981, we have been successfully catering to the needs of bulk material handling, material conveying, storage, reclaiming & stacking, surface finishing, peening and casting.

Usually, sprockets with 12 teeth are used in low-speed bucket elevators (chain speed less than 45 m/min.). High-speed bucket elevators normally require 24-tooth sprockets. It is important to choose a sprocket with suitable pitch-line clearance. Excess conveyed material may accumulate in the bottom of the casing, which can cause accelerated wear. Worn chain and sprockets will not engage correctly; the sprockets may have to be replaced. Sometimes, welding material onto the tooth at the point of excessive wear will restore the sprocket, but it is not recommended. Additionally, this procedure is extremely difficult with the sprocket that is located at the top of the bucket elevator. Even sprockets with hardened teeth are subject to excessive wear in bucket elevators, due to the abrasive nature of conveyed materials. For example, in cement conveyors, there is a point of sprocket hardness at which wear is virtually eliminated. However, it is impractical and expensive to make such hard teeth in standard sprockets. In the 1980s, detachable-tooth sprockets were developed, which permit the replacement of the tooth part only. The body of the sprocket remains on the shaft, which reduces repair time and costs. By using special materials in the tooth insert, high tooth hardness is achievable, and therefore, wear life is increased. Use of detachable-tooth sprockets is increasing, especially in the cement industry.

Stack Reclaimers are popular when heavy industrial processes require that large storage piles of raw material are necessary. Reclaimer chain and flight assemblies function like scraper conveyors, less the trough , with flight blades that push material toward a belt feeding conveyor. The reclaimer conveyor's chain with digging flights are supported by rails and structure which span over or across the pile being reclaimed for transfer to plant processes

Know Us Leveraging on our robust infrastructure and expertise of dexterous workforce, we, IndoChains, are a name to reckon with. Established in the year 1981, we have been successfully catering to the needs of bulk material handling, material conveying, storage, reclaiming & stacking, surface finishing, peening and casting.

Know Us Leveraging on our robust infrastructure and expertise of dexterous workforce, we, IndoChains, are a name to reckon with. Established in the year 1981, we have been successfully catering to the needs of bulk material handling, material conveying, storage, reclaiming & stacking, surface finishing, peening and casting.

industrial wheel