Supplying business of construction chemicals like Concrete admixtures and Bonding agent,
concrete admixture raw material sodium lignosulphonate/MN-1/MN-2 Sodium lignosulphonate is also named ligno (short for MN-1/MN-2). HS code:3804000090, CAS:8061-51-6. Extracted for wood pulp, it is a natural polymer, and has strong dispersion. As a surface-active substance, it can adsorb on the surfaces of various solid particle. Product as a pale yellow (brown) free-flowing powder, soluble in water, chemically stable, long-term sealed storage without decomposition.At present, sodium lignosulphonate is widely promoted and applied in resins, rubber, dyes, pesticides, ceramics, cement, asphalt, feed, water treatment, water coal slurry, concrete, refractories, oil drilling, compound fertilizer, smelting, casting, adhesive, agricultural chemicals, anti-scale chemical etc. There is plastic pellicle inside and is exteriorly packed with plastic woven bag with 25kgs as net weight per bag or 550kgs per bag on pallet.
STEMOL PW-35 (PCE POWDER) The product was powdered polycarboxylate superplasticizer with high performance of water-reducing and slump retention It has the benefits as follow: 1. High water reducing rate could achieve 25% above, under the conditions of mixing the concrete with the same ratio of the water, the product could improve fluidity greatly. 2. Liquid polycarboxylate superplasticizer is available by diluting the product with just water. 3. The index of performance for this product is the same with the index of pumping agent. 4. It is convenient during use & can meet the requirement of building plants in remote area by mixing the product with water. 5. The product has the features of uniforms particles, lower moisture content, excellent solubility, high range water reducing, high slump retention and so on. TECHNICAL PARAMETER ITEMS INDEX APPEARANCE WHITE TO YELLOW POWDER WATER REDUCING RATE % >25 SLUMP RETENTION 2 HR MM 450 PH VALUE 7.0 - 9.0 MOISTURE
Product Description High Range Water-Reducing Admixture Sodium Naphthalene Sulphonate Formaldehyde, Poly Naphthalene Sulfonate Formaldehyde Condensate,Concrete Admixture Uses Sodium Naphthalene Sulphonate Formaldehyde produces concrete with extremely workable characteristics referred to as high slump. PNS also allows concrete to be produced with very low water/cement ratios at low or normal slumps. Sodium Naphthalene Sulphonate Formaldehyde is ideal for use in prestress, precast, bridge deck or any concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation Sodium Naphthalene Sulphonate Formaldehyde Specification: Solid Content :93% PH value :8.42 Chlorides Content :0. 39% Sodium Sulfate Content :16% Addition Rates Sodium Naphthalene Sulphonate Formaldehyde can be added directly or added in after melt. It can be added during mixing and after-mixing. The afterward approach can achieve better result. The suggested addition rate is 0.75%. Sodium Naphthalene Sulphonate Formaldehyde Direction Prepare solutions as required. Direct use of powdery agent is allowed. Alternatively the addition of the agent is followed by water moisturization (water-cement ratio: 60%). The agent can be combined with other externally applied agents if pilot development or laboratory experiment succeeds. Sodium Naphthalene Sulphonate Formaldehyde Package, Storage & Handling For powder: Woven fabric bag with plastic liner. Net weight: 25kg +/- 0.1 kg. 25kg in PP woven bag lined with plastic film
Physical and chemical characteristics Properties: white crystalline granule or powder, easy to dissolve in the water Molecular formula: c6h11o7na Quality standard Index items standard value test results Appearance white or yellowish crystal powder meets the requirement Purity 98.5% 99.22% Ph value 6.08.0 6.70 Sulphate 0.05% 0.03% Chloride 0.07% 0.04% Lead, ug/g 2% 1.38% Loss on drying 0.5% 0.21% Reducing substances 0.7% 0.38% Uses: 1.In the medicine field, it can keep the balance of acid and alkali in the human body, and recover the normal operation of nerve. It can be used in the preventation and cure of syndrome for low sodium. In this purpose, it also can be used as food additives. 2.It can be used as water quality stabilizer because it has excellent inhibiting capacity to scale. 3.Used as surface cleaning agent of metal 4.Used as cleaning agent of glass bottle 5.It also can be used as water reducing agent and retarder in the building industry. Packing, storage & transportation: 1, packing: 25kg in pp woven bag lined with plastic film. 2 , storage: kept in dry and ventilating place, prevent from rain and moisture when storage if agglomerated, please crush and make it into solution, and its effect will be the same. 3 , transportation:non-toxic, harmless, non-inflammable and non-explosive chemicals, it can be transported in truck and train. 25kg in pp woven bag lined with plastic film
Mn3: Index items standard value test results Ph value 8-10 8.3-8.5 Dry matter 92% 96 Lignosulphonate 50% 55 Water insoluble matter 1.0% 0.45 Product description Sodium lignosulphonate ( lignosulfonate ) water reducer are mainly for concrete mixture as water-reducing additive. Low dosage , low air content , water reducing rate is high , adapt to most kind of cement. Can confected as concrete early-age strength enhancer , concrete retarder , antifreeze , pumping aids etc. Nearly no precipitate product in the liquor additive which is made from the sodium lignosulphonate and naphthalin-group high-efficiency water reducer .The sodium lignosulphonate is fit for apply to building project, dam project, thruway project etc. Main performance 1. Can be applied as common water reducing admixture and built material of series multifunction high-performance water reducing admixtures. 2.Can be adopted as the adhesives in the briquetting procedure in the vertical retort zinc smelters. 3. Can be used as embryo reinforcing agents in the fields of pottery and porcelain and refractory materials. They can increase the fluidity of the slurry and thus to improve the strength of the embryo. 4.In the field of water-coal paste, the sodium lignosulphonate series products can be adopted as the main compound materials. 5.In agriculture, the sodium lignosulphonate series products can be applied as the dispersant agents of pesticides and pelleting adhesives of fertilizers and feedstuffs. Packing, storage & transportation: 1packing: 25kg in pp woven bag lined with plastic film. 2 storage: kept in dry and ventilating place, prevent from rain and moisture when storage; if agglomerated, please crush and make it into solution, and its effect will be the same. 3 transportation:non-toxic, harmless, non-inflammable and non-explosive chemicals, it can be transported in truck and train. 25kg in pp woven bag lined with plastic film
Product Description High Range Water-Reducing Admixture Sodium Naphthalene Sulphonate Formaldehyde, Poly Naphthalene Sulfonate Formaldehyde Condensate,Concrete Admixture Uses Sodium Naphthalene Sulphonate Formaldehyde produces concrete with extremely workable characteristics referred to as high slump. PNS also allows concrete to be produced with very low water/cement ratios at low or normal slumps. Sodium Naphthalene Sulphonate Formaldehyde is ideal for use in prestress, precast, bridge deck or any concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation Sodium Naphthalene Sulphonate Formaldehyde Specification: Solid Content :96.42% PH value :8.3 Chlorides Content :0.25% Sodium Sulfate Content :4.4% Addition Rates Sodium Naphthalene Sulphonate Formaldehyde can be added directly or added in after melt. It can be added during mixing and after-mixing. The afterward approach can achieve better result. The suggested addition rate is 0.75%. Sodium Naphthalene Sulphonate Formaldehyde Direction Prepare solutions as required. Direct use of powdery agent is allowed. Alternatively the addition of the agent is followed by water moisturization (water-cement ratio: 60%). The agent can be combined with other externally applied agents if pilot development or laboratory experiment succeeds. Sodium Naphthalene Sulphonate Formaldehyde Package, Storage & Handling For powder: Woven fabric bag with plastic liner. Net weight: 25kg +/- 0.1 kg. 25kg in PP woven bag lined with plastic film
Product name: sodium gluconate Production technology: fermentation technology Assay: 98% Price: usd650-720/mt Grade: industry grade Packing: 25kgs/bag, or according customer's requirements Moq:5mt 20fcl qty: 25mt Delivery: 7days Payment: tt or lc at sight Validity: 7days Sodium gluconate is widely used as concrete admixture, cement retarder, water reducer agent, steel and glass bottle industrial cleaning agent, scale removal and corrosion inhibitor, we welcome your further inquiry. Please forward this e-mail to your purchase department, thank you for your time and wish you a nice day! Thanks& kind regards! Sally E: sally@qilubiogroup.Com Skype:sallyskype88 25kgs/bag
Sodium lignosulphonate, calcium lignosulphonate used as concrete admixture in construction, ceramic additive, water reducing agent, oil well additives, dyestuff additives, dispersant, bonding agent, ect 25kg/bag
