1. Model of Big Capacity RO Brackish Water Treatment Machine with ERI According to the water production capacity to differentiate, ranging from 1T/D ~ 10000T/D different kinds of seawater desalination plants 2.Technique Parameter of RO Brackish Water Treatment Machine .Application Scope: TDS10000mg/L .Output Water Quality: TDS600mg/L. .Meet the {World Health Organization (WHO) Guidelines for Drinking Water Quality.} Recovery Rate: 35%~50%. Adapted Seawater temperature: 5.0---30.0227;C Freshwater Electricity Consumption/Ton: Below 3.8 kWèh/m3 no
Reverse osmosis plants intended for decreasing of the water mineralization, removal of the organic pollution, viruses,bacteria and microorganisms and for producing water with prescribed parameters. Fields of application: Desalination of sea water for potable water production; Water pretreatment for steam generation; Water pretreatment prior using in semiconductor industry; Food, pharmaceutical and energy industries; Municipal wastewater treatment; Concentration processes in food industry. A unique feature of the our Reverse Osmosis Desalination Plants is the smallest possible specific cost of production of high quality potable water. Basic costs consist of the cost of electricity and the small expenses for well known available reagents. Our longlife ,robust and cost-efficient RO Desalination Plants have minimum possible specific electricity consumption - about 3.5kW*h/m3 of potable water. Desalination Plant works in a fully autonomous mode and requires a minimum maintenance personnel. Desalination Plants can be placed in a rapidly constructed buildings or supplied in container version for high mobility and quick launch. We provide all range of turnkey services : from technical audit and forming of technical specifications of the project to installation works and personnel training. Please don't hesitate ask best solution for your task to vk at konstante dot eu . Also we implement using modern and reliable technologies: - Water treatment plants(industrial and municipal); - Wastewater treatment plants (industrial and municipal); - RO Desalination plants (Cost-efficient and energy-efficient); - H2S removal solutions (unique compact and cost-efficient ); - Iron and manganese removal solutions; - Wastewater Disinfection plants for irrigation. Supplied in 40' containers
Supplier: Ro plants, seawater desalination plants
Buyer: RO plants, seawater desalination plants
Function and service description of Seawater Desalination Plant -Raw water boosting and pre-treatment system -Online monitoring device of Reverse Osmosis -Automatic cleaning and fore & back flushing system with compressed air acceleration of sand filter. -Automatic low speed chemical cleaning and dosing system. - Spares and special tools with reference to maker's standard On-site commissioning and conduct available upon demand of customer in China - World-wide aft-sales service and maintenance upon request Performance system function of RO Seawater Desalination Plant 1) Sea water 35000ppm, for desalinating sea water into fresh water 500ppm 2) Whole system under control and monitoring via PLC 3) Automatic cleaning and back-flushing system equipped for sand filter, 4) There is over-pressure protection available for high pressure pump, when pressure is over 6.8Mpa, the system will shut down automatically, and give alarm for attention. 5) High pressure pump equipped with low-pressure protection device, when pre-treated sea water pressure is less than 0.05Mpa, the system will shut down automatically and give alarm for attention. 6) Working parameter (Raw water flow, product flow, brine flow, operation pressure, product water conductivity) 7) If the product water is unqualified (salt content more than 700ppm), the system will drain automatically and give alarm for attention. 8) Potential-free alarm and running indication available for extension. Technical parameter of RO Seawater Desalination Plant Product: 1m3/d-200m3/day Raw water: â?¤ 3000PPM~45000PPM Inlet temperature: 5~35° C PH value of Raw W: 3.0~10.0 Boosting inlet pressure: 0.1~1kg/cm2 (Positive) Salt content of product water: â?¤ 10~600PPM Desalination rate: â?¥ 98.5% Product water pressure: â?¤ 0.3Mpa Recovery: 36% Power supply: 380VAC/50Hz/3Ï? or as request Power consumption: 18.5KW(Include boost pump) Control cabinet: 220VAC Control voltage: 220VAC IP: IP55 Potential-free extension for running indication and common alarm available. Motor: IP: IP55 Insulation class: "F" Outline: LÃ? WÃ? H=2750Ã? 1950Ã? 2200mm Weight: Dry weight 2500kg
Function and service description of Seawater Desalination Plant -Raw water boosting and pre-treatment system -Online monitoring device of Reverse Osmosis -Automatic cleaning and fore & back flushing system with compressed air acceleration of sand filter. -Automatic low speed chemical cleaning and dosing system. - Spares and special tools with reference to maker's standard On-site commissioning and conduct available upon demand of customer in China - World-wide aft-sales service and maintenance upon request Performance system function of RO Seawater Desalination Plant 1) Sea water 35000ppm, for desalinating sea water into fresh water 500ppm 2) Whole system under control and monitoring via PLC 3) Automatic cleaning and back-flushing system equipped for sand filter, 4) There is over-pressure protection available for high pressure pump, when pressure is over 6.8Mpa, the system will shut down automatically, and give alarm for attention. 5) High pressure pump equipped with low-pressure protection device, when pre-treated sea water pressure is less than 0.05Mpa, the system will shut down automatically and give alarm for attention. 6) Working parameter (Raw water flow, product flow, brine flow, operation pressure, product water conductivity) 7) If the product water is unqualified (salt content more than 700ppm), the system will drain automatically and give alarm for attention. 8) Potential-free alarm and running indication available for extension. Technical parameter of RO Seawater Desalination Plant Product: 1m3/d-200m3/day Raw water: â?¤ 3000PPM~45000PPM Inlet temperature: 5~35° C PH value of Raw W: 3.0~10.0 Boosting inlet pressure: 0.1~1kg/cm2 (Positive) Salt content of product water: â?¤ 10~600PPM Desalination rate: â?¥ 98.5% Product water pressure: â?¤ 0.3Mpa Recovery: 36% Power supply: 380VAC/50Hz/3Ï? or as request Power consumption: 18.5KW(Include boost pump) Control cabinet: 220VAC Control voltage: 220VAC IP: IP55 Potential-free extension for running indication and common alarm available. Motor: IP: IP55 Insulation class: "F" Outline: LÃ? WÃ? H=2750Ã? 1950Ã? 2200mm Weight: Dry weight 2500kg
12M3/HOUR CAPACITY SEA WATER REVERSE OSMOSIS WATER TREATMENT SYSTEM Typical SWRO System consists of; * Intake (Deep well, beach well, open intake, deep sea intakeâ?¦) * Pre-treatment (multimedia filter, cartridge filter, dosing unitsâ?¦) * High pressure pump (according to calculated required pressure with or without energy recovery unit) * Membrane assembly (according to design program) * Energy recovery (details are below) * Remineralization (dolomite filterâ?¦) * Disinfection (ultraviolet or chlorine dosing) STANDARD MODELS Raw Water TDS < 25000 # of Membranes 100 m3/day 6 200 m3/day 12 300 m3/day 18 400 m3/day 24 500 m3/day 30 1000 m3/day 60
Supplier: Seawater desalination plant, ro plant, brackish water desalination plant, well water treatment plant, water treatment plant, marine seawater desalination plant
1.Cyclone separation technology has high oil removal efficiency when used with electric desalination sewage degreasing; 2.Using swirling degreasing technology can significantly reduce the amount of demulsifier added in sewage treatment; 3.Due to cyclone coalescence, cyclone recovered oil is easier to demulsify and dehydrate; 4.The equipment has simple structure, high degree of automation, stable operation, environmental protection and high efficiency.
www.ropurifierfilter.com Quick Details Model Number:500 L/H Type:Pure Water Treatment System Capacity:250 Liter per hour Warranty:1 Year Voltage:220V / 380V Function:Producing Fresh Water Filter material:Quartz Sand/Activated carbon Optional:Softener, Sterilizer, Ozone Material:FRP Tank,Stainless steel tank Operating:Automation and Manual Product Description The industial ro (reverse osmosis) water plant is suitable for applications requiring depth filtering. More than 99% of all microorganisms, pyrogens, particulates, organics with a molecular weight greater than 300, and up to 95% of all dissolved inorganic contaminants from the feed water are removed. Product advantages * Over 10 years of experience in reflected in our quality * Manufactured in the China with CE Certified Facilities * Conservatively engineered for reliable, long term performance * It Removes All Types Of Contaminants * Removes The Odor Off Of The Water * Long Lasting * Saving money * Very easy to maintain Application fields 1, Printing enterprises wastewater reuse ; 2, PCB enterprise wastewater reuse ; 3, Electroplating enterprise wastewater reuse; 4, Painting enterprise wastewater reuse ; 5, Other car washing/industries wastewater reuse ; 6,Well/underground/tap/river/ municipal water.