Function and service description of Seawater Desalination Plant
-Raw water boosting and pre-treatment system
-Online monitoring device of Reverse Osmosis
-Automatic cleaning and fore & back flushing system with compressed air acceleration of sand filter.
-Automatic low speed chemical cleaning and dosing system.
- Spares and special tools with reference to maker's standard
On-site commissioning and conduct available upon demand of customer in China
- World-wide aft-sales service and maintenance upon request
Performance system function of RO Seawater Desalination Plant
1) Sea water 35000ppm, for desalinating sea water into fresh water 500ppm
2) Whole system under control and monitoring via PLC
3) Automatic cleaning and back-flushing system equipped for sand filter,
4) There is over-pressure protection available for high pressure pump, when pressure is over 6.8Mpa, the system will shut down automatically, and give alarm for attention.
5) High pressure pump equipped with low-pressure protection device, when pre-treated sea water pressure is less than 0.05Mpa, the system will shut down automatically and give alarm for attention.
6) Working parameter (Raw water flow, product flow, brine flow, operation pressure, product water conductivity)
7) If the product water is unqualified (salt content more than 700ppm), the system will drain automatically and give alarm for attention.
8) Potential-free alarm and running indication available for extension.
Technical parameter of RO Seawater Desalination Plant
Product: 1m3/d-200m3/day
Raw water: â?¤ 3000PPM~45000PPM
Inlet temperature: 5~35° C
PH value of Raw W: 3.0~10.0
Boosting inlet pressure: 0.1~1kg/cm2 (Positive)
Salt content of product water: â?¤ 10~600PPM
Desalination rate: â?¥ 98.5%
Product water pressure: â?¤ 0.3Mpa
Recovery: 36%
Power supply: 380VAC/50Hz/3Ï? or as request
Power consumption: 18.5KW(Include boost pump)
Control cabinet: 220VAC
Control voltage: 220VAC
IP: IP55
Potential-free extension for running indication and common alarm available.
Motor: IP: IP55
Insulation class: "F"
Outline: LÃ? WÃ? H=2750Ã? 1950Ã? 2200mm
Weight: Dry weight 2500kg
A Reverse Osmosis (RO) Plant utilizes a semipermeable membrane to remove impurities and dissolved solids from water, producing high-quality purified water. This efficient system is essential for applications ranging from drinking water supply to industrial processes.
Reverse Osmosis Plant
General description Subject technical proposal specify requirement technical details, supply scope, testing scope, testing standard, packing, delivery and aft-sales service. Availability The technical proposal specify design scheme, inspection protocol, and to be confirmed as attachment of contract. System requirement 2.1 Subject proposal relates the flow diagram, which comply with standard requirement of customer. 2.1. 1 Fresh water standard comply with WHO 2.1. 2 Capacity: =20m3/D 2.1. 3 Salt content: 600mg/L 2.2 Subject proposal conclude with follow requirement. 2.2.1 Raw water: Sea water 2.2. 2 Other basic design condition related Model of Reverse Osmosis: One stage Reverse Osmosis Purpose: Marine and offshore Power supply: 380VAC, 50 Hz, 3P Function and service description -Raw water boosting and pre-treatment system -Online monitoring device of Reverse Osmosis Cleaning and fore & back flushing system with compressed air acceleration of sand filter. Spares and special tools with reference to maker's standard On-site commissioning and conduct available upon demand of customer in China
RO Membranes are semipermeable membranes used in Reverse Osmosis systems to filter out dissolved solids, impurities, and contaminants from water. They play a crucial role in producing high-quality purified water for drinking, industrial applications, and wastewater treatment by allowing only water molecules to pass through while rejecting larger molecules and ions.
Features: 1) Made with reverse osmosis membranes (ESPA4040 x 10, 2 grade) 2) System components a) Two stainless steel pre-filters b) 800kg quartz sand filter c) 300kg active carbon filter d) PP sediment membrane: 330 x 500 x 1.5, 5 items e) Pre-filter: 750 x 1500, 2 items f) Two multi-phase pumps g) Booster pump h) Stainless steel waterproof housing 3) Capacity: 2,000L/h, 25 degrees 4) Dimensions: 3,200 x 700 x 1,970mm 5) Source water: tap water Packing: Wooden case
Water Treatment Plant
Waste Water Plant
www.ropurifierfilter.com Quick Details Model Number:500 L/H Type:Pure Water Treatment System Capacity:250 Liter per hour Warranty:1 Year Voltage:220V / 380V Function:Producing Fresh Water Filter material:Quartz Sand/Activated carbon Optional:Softener, Sterilizer, Ozone Material:FRP Tank,Stainless steel tank Operating:Automation and Manual Product Description The industial ro (reverse osmosis) water plant is suitable for applications requiring depth filtering. More than 99% of all microorganisms, pyrogens, particulates, organics with a molecular weight greater than 300, and up to 95% of all dissolved inorganic contaminants from the feed water are removed. Product advantages * Over 10 years of experience in reflected in our quality * Manufactured in the China with CE Certified Facilities * Conservatively engineered for reliable, long term performance * It Removes All Types Of Contaminants * Removes The Odor Off Of The Water * Long Lasting * Saving money * Very easy to maintain Application fields 1, Printing enterprises wastewater reuse ; 2, PCB enterprise wastewater reuse ; 3, Electroplating enterprise wastewater reuse; 4, Painting enterprise wastewater reuse ; 5, Other car washing/industries wastewater reuse ; 6,Well/underground/tap/river/ municipal water.
Applicable Industries: Hotels, Garment Shops, Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Farms, Restaurant, Home Use, Retail, Food Shop, Printing Shops, Construction works , Energy & Mining, Food & Beverage Shops, Advertising Company, commercial water; Place of Origin: Sichuan, China (Mainland); Brand Name: Zhuoyue; Material: Wooden case; Weight: > 200kg; Size: â?¥ 1500*600*1500 mm; Power: â?¥ 1.2 Kw; After-sales Service Provided: Video technical support, Free spare parts, Online support; Warranty: 1 Year; Water yield: 0.25-10 m3/h; Material of tank: Stainless steel/ PE/FRP; Inlet water temperature: 5~40; Inlet water pressure: 0.2-0.4MPa; RO membrane: 0.0001-0.001um; Desalinization rate: â?¥ 99%; Bacteria, endotoxin removal rate: â?¥ 99%; Recovery rate: â?¥ 75%; Pure water conductivity: â?¤ 15us/cm; Certification: ISO9001.
