Thread Bars
D Shackle
Principal Design Features C-276 is a wrought corrosion-resistant alloy. A prime advantage of this alloy is that it generally does not require solution heat treatment after welding. It resists the formation of grain boundary precipitates that would degrade corrosion resistance. Types HASTELLOY C276 HASTELLOY C-276 alloy is a nickel-molybdenum-chromium wrought alloy that is generally considered a versatile corrosion-resistance alloy. HASTELLOY C-276 alloy has excellent resistance to a wide variety of chemical process environments, including strong oxidizers such as ferric and cupric chlorides, hot contaminated media (organic and inorganic), chlorine, formic and acetic acids, acetic anhydride, and seawater and brine solutions. It is used in flue gas desulfurization systems because of its excellent resistance to sulfur compounds and chloride ions encounted in most scrubbers. HASTELLOY C22 The C-22 alloy exhibits superior weldability and is used as overalloy filler wire and weld overlay consumables to improve resistance to corrosion C-22 alloy has exceptional resistance to a wide variety of chemical process environments including strong oxidizers such as ferric and cupric chlorides, chlorine, hot contaminated solutions (organic and inorganic), formic and acetic acids, acetic anhydride, and seawater and brine solutions HASTELLOY C2000 The technical objective during the design of HASTELLOY C-2000 alloy* was even greater versatility, as compared with the traditional Ni-Cr-Mo alloys. This was accomplished by use of a high chromium content (23 wt.%), a high molybdenum content (16 wt.%), and a small but effective addition of copper (1.6 wt.%)
Supplier: Lacquer Thinner, Adhesives and Hardware Products.
CASING END SEALS: Pipes are situated inside a casing near rivers, highways, railways or other such locations where safety is required. The opening between the carrier and the casing needs to be protected to prevent foreign material to enter. This opening is an attractive spot for corrosion and so is required to be kept dry. Custom designs can be made depending on whether it is a new installation or for retrofitting. Nik-San casing end seal are economic, easy to install and a clean solution.
Nik-San's Pipe Rollers supports pipeline Teflon coated contact heavy duty pipe rollers â??Vâ?? type roller points prevent pipe contamination. Dual-roller style, moulded, oversized roller bearings, optional horizontal roller for small-diameter pipe, Forklift pockets and lift hooks for easy movement on jobsite. Lightweight rugged construction to withstand rough handling. Color coated to resist spatter. Helps protect exterior of pipe during crossing installations and reduces drag/pulling forces substantially.
Standards ASTM B160 F1554 ASME SB160 SF1554 Dimensions DIN 931 933 934 7991 976 125 ASME B1821 B183 Fasteners size Bolt Screw Size M3 M56 36 to 2 Custom Sizes Nuts Size M3 M56 36 to 2 Custom Sizes Washers Size M3 M56 36 to 2 Custom Sizes Machine Screws Size M16 M12 Self Tapping Screw Size No2 No 14 Length 3 mm to 200 mm Threads UNF BSW BSF METRIC UNC or as required Surface Coating Ptfe Coated Fasteners Phosphate Coating Teflon Coating Zinc Coating Hot Dipped Galvanizing Coating Cadmium Coating Xylon Coating Finishing SelfColour Passivated Bright Zinc Plated BZP Hot Dip Galvanised HDG Sherardized some special one like DACROMET Geometry and Mechanically Applied coating Dacroment nickel plated anodizing plated zincnickel Zinc blue black yellow white black oxide
Standards ASTM B574, F1554 / ASME SB574, SF1554 Dimensions DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3 Fasteners size Bolt / Screw Size : M3 â?? M56 | 3/6â?³ to 2â?³ | Custom Sizes. Nuts Size : M3 â?? M56 | 3/6â?³ to 2â?³ | Custom Sizes. Washers Size : M3 â?? M56 | 3/6â?³ to 2â?³ | Custom Sizes. Machine Screws Size : M1.6 â?? M12. Self Tapping Screw Size : No.2 â?? No. 14. Length 3 mm to 200 mm Threads UNF, BSW, BSF, METRIC, UNC or as required Surface Coating Ptfe Coated Fasteners Phosphate Coating Teflon Coating Zinc Coating Hot Dipped Galvanizing Coating Cadmium Coating Xylon Coating Finishing Self-Colour, Passivated, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), Sherardized, some special one like DACROMET Geometry and Mechanically Applied coating ,Dacroment, nickel plated, anodizing, plated zinc-nickel Zinc (blue, black, yellow, white), black oxide.
Standards ASTM B348 , ASME SB348 Dimensions DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3 Fasteners size Bolt / Screw Size : M3 â?? M56 | 3/6â?³ to 2â?³ | Custom Sizes. Nuts Size : M3 â?? M56 | 3/6â?³ to 2â?³ | Custom Sizes. Washers Size : M3 â?? M56 | 3/6â?³ to 2â?³ | Custom Sizes. Machine Screws Size : M1.6 â?? M12. Self Tapping Screw Size : No.2 â?? No. 14. Length 3 mm to 200 mm Threads UNF, BSW, BSF, METRIC, UNC or as required Surface Coating Ptfe Coated Fasteners Phosphate Coating Teflon Coating Zinc Coating Hot Dipped Galvanizing Coating Cadmium Coating Xylon Coating Finishing Self-Colour, Passivated, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), Sherardized, some special one like DACROMET Geometry and Mechanically Applied coating ,Dacroment, nickel plated, anodizing, plated zinc-nickel Zinc (blue, black, yellow, white), black oxide.
