Rapid Temperature Change Test Chamber description:
Rapid temperature changes (damp heat) test chamber is suitable for the whole product, parts and materials for high temperature, low temperature, high and low temperature circulating and temperature stress screening (ESS) test, and constant humidity and cyclic damp heat test. This type of machine mainly used to simulate the product in climate conditions, a temperature and humidity conditions or at ambient temperature and humidity conditions, detecting the product features and the adapt change ability. It is the aviation, automobiles, home appliances, research and other fields necessary test equipment.
Rapid temperature change test chamber advantages:
1.Can set the temperature variable rate of the different stress screening
2.Can perform a rapid temperature change (ESS), condensation test, high temperature and humidity test, temperature and humidity cycling test, etc.
3.Meet the requirements of stress screening test for electronic equipment
4.Switching temperat stress screening (fast temperature change rate) 5deg C/min, 10deg C/min, 15deg C/min experimental conditions
6.Meet the requirements of stress screening test for electronic equipment MIL-STD-2164, MIL-344A-4-16, MIL-2134A-19, NABMAT-9492, GJB-1032-90, GJB/Z34-5.1.6, IPC-9701....ETC.
7.Can carry out the two test methods, temperature test and average temperature test
8.With aluminum sheet test machine load capacity (non plastic load)
9.Single machine can perform fast temperature change (ESS), condensation test, high temperature and humidity test, temperature and humidity cycling test, etc.
10.Can screen the sample load with a large number
11.Built in two-way USB2.0 portable storage interface (can copy the test curve and load the test program)
12.Complete real-time test curve analysis shows that no time limit
13.Can be integrated with the E management system to monitor the management system
14.Multi-language selection: Chinese, English, Russian, Korean, Japanese, German multilingual language switching.
Rapid temperature change test chamber accessories:
1.Standard equipment
Test product load power supply 3 groups
Each side of the left and right side has a 50mm Pin hole
Pin hole silicone plug 2 PCS
Stainless steel sample holder 2 PCS
20L water storage tank 1 PCS
Pure water filter 1 PCS
E the internal temperature effectively. 4. Water supply system that is externally connectable, convenient for refilling water into the humidifying pot and automatically recyclable. 5.French tecumseh is used as compressor, with environment friendly refrigeration r232 or r404a 6. Lcd display screen, capable of displaying the measured value as well as the set value and time. 7. The control unit has the functions of multiples segment program editing, with quick or ramp rates control of temperature and humidity. 8. casters are provided for ease of mobility, with strong positioning screws. Vices: fuse free switch, overloading protection switch for compressor, high and Wooden case
Supplier: Air dryer, control valves , heat exchanger, instruments and controls
Services: Sourcing industrial goods from india
Supplier: Gas lighter, led screen protector ( not even in domestic ), refill paper cups, table runner, earing brass clamp, auto brass electric parts, cashew nuts, wire mesh, petha sweet, niwar, mohini powder, vermicompost, dry bath incubator, test tube plastic, sordium citrate tube, health care product, ornamental freshwater fish, safed musli, used polymer bag, cotton linter, auto hood cover, areca plate, Rice
Supplier: Food products, fruit and recreational plants, palm trees, generators, transformers, household electronics, ev charging stations, accumulators and battery systems, cooling appliances and frigotic systems for vehicles, furnitures (office and household types), copper tubes, powder metals for 3d printers, electrical equipment, defense products most notably drones (strategic /tactical), carrying boxes.
Services: Trade, sourcing and investment intelligence, supply chain development services, trade facilitation, inspection, operations support, full fledged trade/supply chain agency services
Buyer: High grade lead, zinc, antimony, manganese, iron ores.
Supplier: Low voltage power cables, mid voltage power cables, control cables, instrumentation and telecommunication cables, optical fiber cables, mine low voltage power cables, mine mid voltage power cables, rail transit communication cables, railway rolling stock cables, cables for use in photovoltaic systems, fireproof cable, low voltage power cables for shipboard and offshore, mid voltage cables for shipboard and offshore, control cables for shipboard and offshore, instrumentation and telecommunication cables for shipboard and offshore compensating extension cables and compensating cables, rubber sheathed cable, charging post cable, connecting cables for equipment, towline cables, high temperature resistant cable,esp power cable, (electrical submersible pump power cable), mining detection cable, logging cable, submarine power cable
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
This product is made of high quality oxygen-free copper conductors, fluorinated plastics, Silicone rubber resistant to high / low quality materials as insulation and sheathing materials, Has good heat resistance, heat aging resistance and excellent electrical properties, Meet the conditions for saft operation under the particularity of wire and cable, and provides High cable life and improve the economic and social benefits.
RF inductors are special inductors designed to be used in radio frequency (RF) and microwave applications. Inductors are basic passive components which serve to oppose changes in current flow. When current is applied from a battery or power source, the inductor temporarily stores it using a magnetic field. For price, specification and other details please contact us