JMY680 series are RFID reader/writer module with IIC or UART serial ports. JMY680 has various functions and supports multi ISO/IEC standard of contactless IC card; the cards from different suppliers. The designer combined some frequent used command of RF IC card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. The module and antenna are integrated design. And the impedance between RF module and antenna was tuned by impedance analyzer. So the module has excellent performance and stability. Qualifications: PCD: NXP RC500, RC531, RC400, RC632 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 80mm(depending on card and antenna design) Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only Auto detecting card: Supported, default ON SAM card slot: 1 slot, 9600bps /38400bps EEPROM: 512 Bytes PPSS set: Supported Interface: IIC, UART, RS232C or USB to RS232C Bridge(select when place order) Communication rate: IIC--400Kbps; UART--19.2Kbps/115.2Kbps Max.command length: 511 Bytes Interface level: 3.3V (TTL level; 5V tolerance) Power supply: 5.0V Power consumption: 150mA Dimension: 70mm¡Á50mm¡Á16.5mm Weight: about 120g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF ISP: Supported RoHS: Compliant 10 pcs per box, box size 16*12*5cm.
Qualifications: PCD: NXP RC500, RC531, RC632, RC400; FM1722(followed shanghai encipherment standard, custom-made) Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 100mm (Mifare One, normal distance) SAM card slot: 2 slots, supported ISO7816 T=0, supported 9600bps & 38400bps Interface: RS232C or USB (build-in CP2102 USB to RS232 converter) Baud rate: 9600 ~ 115200 BPS Power supply: DC5V Power consumption: 180mA Dimension: 123mm¡Á88mm¡Á25mm Weight: about 150g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF 1pc/box, 16*12*5cm.
Key features: Dc5v power supply from usb; usb com port; Compliant with iso14443a/b, iso15693, iso7816 t=1 standard; Support read/write contactless series cards and contact smart sam cards. Embedded with one smart contact card socket under iso7816 t=1 standard; Available to operate desfire picc level, application id create/delete/format, etc Support to create standard datafile&backupfile, and valuefile, recordfile, etc Dimension with 80mmx84mmx12mm, Internal led&buz for status indication, one smart sam card socket. Technical parameters: Electrical specification Power supplydc 5v from usb Power consumption max current
IVF-RH101 reader elf is a portable mini reader that can link with ios, android, wp etc, Intelligent system platform through 3.5mm headphone jack to use. It has the characteristic of plug-and-play, light and small size, low power consumption, built-in rechargeable battery, etc, and is easy to carry, truly make mobile identify tag at any time, anywhere, as you wishes. It¡¯s applicable to anti-counterfeiting terminal device, etc parameter specification: 1).Support high frequency (HF) label agreement 2).Support ios, android, wp, etc Intelligent system platform 3). Material: ABS + PC engineering plastic 4). Weight: 12 g 5). Battery capacity: 130 ma 6). charge modeMicro USB 5V/0.5A 7). operating ambient temperature: -20~60 8). indicator light condition: Normal work: green light for long Abnormal equipment: light not on Low electricity quantity: green light flashing(Slow flash: low power alarm; Flash: stop using low electricity) Charging: red light for long charge complete: green light for long 9) Communication interface: 3.5mm audio interface (Ordinary headphone jack) Size: 39mm*30mm*11mm
Qualifications: PCD: NXP RC500, RC531, RC632, RC400; FM1722 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 80mm (Mifare One, normal distance) SAM card slot: 2 slots, Supported: ISO7816 T=0, Supported: 9600bps&38400bps Interface: RS232C or USB (build-in USB to UART converter) Baud rate: 9600 ~ 115200 bps Power supply: DC5V Power consumption: 180mA Dimension: 141mm¡Á100mm¡Á31mm Weight: about 100g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF. 1 pc/box, box size: 16*12*5cm.
Protocol: ISO/IEC14443 Type A/B Support contact & contactless CPU card, Mifare one S50/ S70/ Ultralight, Mifare Pro Dimension: 95mm*95mm*22mm Read distance: 30 mm-100 mm Port: RS232/USB Plug and play Buzzer, LED indicator Power supply: USB / DC 5.0V Current:
RFID reader Erfid09A USB Interface Card Issuing Devices realize the function of transiting the data from reader to PC via USB Port. The user has no need to download any driver program. You just plug it to USB Port for normal working. It cans instead previous PS/2 Interface Issuing Device. If your Computer Keyboard port has no sufficient power, or not convenient for keyboard output, or with broken keyboard, especially Notebook PC has no PS2 Keyboard out, Erfid09B provide ideal solution for above case. Also this type is with the advantage of no Driver, no additional power.
Asia RFID is a one-stop shop. We can provide high quality RFID products and services. RFID Reader is used for reading RFID cards and tags, and it has the adjustable produces to suit for the reading system.We could provide all kinds of frequencies, such as LF, 125khz, HF, 13.56MHz, and UHF, 860-960MHz.If you have the request for color, size or style, we can custom the reader for you. Of course, we also have more new products. You must like them. Please visit RFID Wristbands and RFID Tags. For more information or about RFID products, please contact us or call us.
RFID HF 13.56MHz Smart Card has a unique serial number, it is a great solution for access control, time attendance system which does not require very high security level. We manufacture both blank white LF RFID card, special shape tags, and pre-printed card. You can choose many crafts if you need.