Foshan Shunde Kardier Sanitary Ware Industry Co. Ltd.

Dimension: 350*113*375mm
Color: white
Material: PP
Flushing: single flush: 6L,Max: 8L
Button: white
Input: bottom input

Dimension: 512*80*1020mm
Material: HDPE
Volume: 3L/6L, Max: 7L
Frame understand: 400kgs
Brass angle valve
Discharge pipe diameter: 90mm or 110mm
Suit for: over 125mm dry wall or prewall
Push panel size: 250*165mm
Push panel color: Chrome/Satin/White

Dimension: 380*116*373mm
Color: White
Material: PP
Flushing: Dual flush 3L/6L, Max: 8L
Button: white color
Input: bottom input

Toilet tissue paper, often referred to as toilet paper or bathroom tissue, is a soft and absorbent paper product primarily used for personal hygiene after using the toilet. It comes in rolls and is typically made from a combination of wood pulp and sometimes recycled paper. Toilet tissue is designed to be flushable and easily disintegrate in water, making it suitable for use in plumbing systems. It is an essential item in households, businesses, and public restrooms worldwide. Toilet tissue is available in various ply levels (thicknesses), textures, and sheet sizes to cater to individual preferences. It plays a crucial role in maintaining cleanliness and sanitation in modern hygiene practices.

Toilet tissue paper rolls, commonly referred to as toilet paper, are essential hygiene products used for personal cleanliness after using the toilet. They are typically made from thin, soft paper material that is designed to be flushable and biodegradable. Toilet paper rolls come in various sizes, ply counts (referring to the number of layers), and sheet dimensions to suit individual preferences. They are available in both single-ply and double-ply options, with some premium varieties featuring even higher ply counts for added comfort and absorbency. Additionally, toilet paper may be scented or unscented, and some may be fortified with moisturizing or soothing ingredients. It's a staple household item found in bathrooms around the world and plays a crucial role in maintaining sanitation and personal hygiene.

The pottery stone ore shown in the earlier photograph is a particularly high-quality special-grade material among our pottery stones. Pottery stones are generally finely crushed, and used as the material for ceramics, bone china, and sanitary ware (toilets, sinks, etc.).

Products are shipped out from our mine in sizes of <= 10 mm obtained by roughly crushing the stones. They are shipped in bulk or by filling flexible containers using large trucks.

APPLICATION OF SK-HB K-SILICATE MORTAR :

* K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors.
It is also used for jointing chemical resisting stoneware pipes.
K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles.
The concrete surface needed protection should be dryed, clean and rough.
The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner.

When Bedding and Jointing Materials are the same.
On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints.
The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water.
Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic.
When Bedding and Jointing Materials are Different.
Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR
A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions.

PREPARATIONS OF MORTAR :
* Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan.

* Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar.

* In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared.

* The cement mortar will be used before it starts setting.

Acid / Alkali Resistant Tiles/Bricks

* Our Acid proof tiles, Acid alkali resistant tiles, Chemical resistant tiles are fully vitrified tiles which are manufactured using special non ferrous clay, processed at extremely high temperatures this process causes the raw materials to fuse and form a compact mass with an extremely low water absorption of less than 0.5% resulting in the formation of a very strong body with a flexural strength of 38 N/mm2, solid through color fade proof with a very hard surface Mohs hardness of 7.

* The acid resistant tiles come in a range of sizes and thicknesses from ranging from 8-25mm. Our acid proof tiles meet stringent specification norms of IS 4457:2007 and relevant ASTM/DIN standards which ensure excellent performance in Acid/Alkali/Chemical (expect Hydrofluoric acid and its derivatives).

Corrosion Protection Applications
* Factory Floors subject to corrosion from Chemicals, Acids, Oil & Solvents
* Pickling tank and surrounding areas
* Food & Beverage Industry flooring
* Battery rooms and Control rooms
* Demineralization plants
* Walls of washing and Paint shop areas
* Acid Resistant Tiles Manufacturers India
* Our acid proof tiles provide excellent abrasion resistance, anti-skid properties for worker safety and high aesthetic appeal. We also provide specialized corner tiles for reducing chances for acid attack through construction joints. Our standard sizes are 200x100, 200x200 & 300x300 millimeters.