Please click here to check who's online and chat with them.

Tibsco Korhan Insaat

(1.0)
Supplier From Japan
Jun-06-17
Supplier : Marble, cement, gypsum powder, gypsum board adhesive plaster, plaster types, gypsum boards (normal, water proof, fire proof types, iron rod, paint (acrylic and water based paints for interior and exterior, ceramic and granite tiles, polished and unpolished tiles for wall and floor, metal strip for ceramic corners:, security door, steel security doors, washbasin, toilet and bathtub, construction powders, construction chemicals, school equipment and furniture, laboratory systems, electricity, transformers, diesel generators, cables, solar modules and carpets and rugs

Services : Trade services
Established: 1989 Standards: ISO 9000

Verification Status

Contact Details:
1-25-7-1104
Nerima 1760001
Tokyo Japan
File a complaint
Rate This Member

Supplier Of Roofing Sheets, Gypsum Board   |   Rugs   |   Cement   |   Ceramic Tiles   |   Diesel Generators   |   Timber   |   Marble & Granite   |   Timber Products   |   Blocks, Tiles & Slabs   |   Carpets, Mats, Rugs, Floorings

Service Provider Of Trade Promotion Services   |   Paints   |   Iron Rods   |   Gypsum

Recent User Reviews

This user has not received any reviews yet!
 
 
Contact Supplier
Renew
 Add to Favorites

More Items Similiar to: Tibsco Korhan Insaat

GOLD Member
VERIFIED
May-24-16
Pure Gypsum Powder

Pure Gypsum Powder

(4.9)
$1.00 - $99.00
MOQ: Not Specified
  Hard Mount Goods Wholesalers LLC
Supplier From Dubai, Dubai, United Arab Emirates
Supplier Of Gypsum
 
Applications:
Use to manufacture gypsum panel or building plasters
Use to make gypsum mold or statutes
As grout of marble, clay and ceiling tiles
As a color additive
Act as additive to other products

Types:
1. Super Micronized Gypsum Powder
2. Facade Rendering Gypsum

Packaging:
25 kg per bag
30 kg per bag
50 kg per bag
1 ton jumbo bag
1.5 tons jumbo bag
2 tons jumbo bag
GOLD Member
Apr-06-18
Fly Ash

Fly Ash

(4.8)
Ask for price
MOQ: Not Specified
  Artha Mineral Resources
Supplier From Mumbai, Maharashtra, India
Supplier Of Other Ores & Minerals
 
Fly Ash:

Fly Ash is by product generated during combustion of coal, and comprises the fine particles that rise with the flue gases. Ash which is collected from the bottom is termed bottom ash. Fly ash is collected by electrostatic precipitators or other particle filtration equipment before the flue gases reach the chimneys of coal-fired power plants and together with bottom ash removed from the bottom of the furnace is in this case jointly known as coal ash. Depending upon the type of coal being used, the specification of Fly Ash varies considerably, but Fly Ash contains substantial amounts of silicon dioxide and calcium oxide (CaO), both being endemic ingredients in many coal-bearing rock strata. We are a reputed Fly Ash Exporter based in India and are supplying Fly Ash different cement, ready mix concrete, steel, refractories and construction industries.

The Major Utilization Areas Of Fly Ash :
- Manufacture of Portland Pozzolanic Cement & Performance improver in Ordinary Portland cement (OPC).
- Part replacement of OPC in cement concrete.
- High volume Fly Ash concrete.
- Roller Compacted Concrete used for dam & pavement construction.
- Manufacture of ash bricks and other building products.
- Construction of road embankments, structural fills, low lying area development.
- As a soil amender in agriculture and wasteland development.

Types of Fly Ash:
- According to the type of coal used fly is classified into two types. Anthracite and bituminous coal produces Fly Ash classified as class F. Class C Fly Ash is produced by burning lignite or sub-bituminous coal. Class C Fly Ash has self-cementing properties.

- Class F and Class C Fly Ash are products of the combustion of coal in large power plants. Fly Ash is collected in electrostatic precipitators or baghouses, and then transferred to large silos for shipment. When needed, Fly Ash is classified by precise particle size requirements, thus assuring a uniform, quality product.

- Class F Fly Ash is available in the largest quantities. Class F is generally low in lime, usually under 15 percent, and contains a greater combination of silica, alumina and iron (greater than 70 percent) than Class C Fly Ash.

- Class C Fly Ash normally comes from coals which may produce an ash with higher lime content generally more than 15 percent often as high as 30 percent. Elevated CaO may give Class C unique self-hardening characteristics.

Minimum Order Quantity : 1 container
GOLD Member
Apr-06-18
Kaolin

Kaolin

(4.8)
Ask for price
MOQ: Not Specified
  Artha Mineral Resources
Supplier From Mumbai, Maharashtra, India
Supplier Of Kaolin
 
Kaolin:

Kaolin uses are multiple and diverse. Kaolin are used as functional filler, extender, ceramic raw material and pigment because of its whiteness and fine particle size. Kaolin also hold importance as raw material in refractory applications, concrete, rubber and fiber glass manufacturing. We, as a Kaolin Exporter welcome any size of international orders from Middle East and other countries.

Applications:

Paper:
Kaolin used as a coating pigment and as a filler to replace fiber. It possesses desirable optical properties.

Concrete:
Kaolin helps to improve strength and durability of concrete. When added to concrete mix, reacts with free lime released during cement hydration to produce additional cementitious material, resulting in an improved high performance concrete.

Plastics :
Kaolin is widely used as filler in the plastics industry because of its inert chemical nature and its unique size, shape and structure.

Agriculture :
It is used as a carrier and diluent in fertilizers, pesticides and related products. It is suitable as carrier because it aides the retention of the formulations on the plant.

Rubber :
It is commonly used as functional filler in rubber applications. While Kaolin improves overall performance for Rubber in general, different types of white pigment play specific roles in rubber application.

Paint :
Kaolin used as an extender in paints. It reduces the amount of expensive pigment such as Titanium Dioxide. It assists with desirable rheological properties that help maintain proper dispersion and provide bulk to the product.

Ceramic :
Kaolin improves whiteness and brightness of ceramic body. Good plasticity, good shrinkage, low water absorption and casting rate are also very important properties of kaolin.
GOLD Member
VERIFIED
Jun-26-21
Gypsum Rocks

Gypsum Rocks

(4.8)
Ask for price
MOQ: Not Specified
  Emarc India
Supplier From Faridabad, Haryana, India
Supplier Of Gypsum
 
We are supplier and exporter of Gypsum Rocks.

We offers Gypsum Rocks with various purity and sizes as per customer requirement.
Gypsum Rock extensively used as a raw material for manufacturing fertilizers, paints, construction materials. We make it available in bulk in chemical-grade packaging. We produce sized natural Gypsum with purity MIN 90% percent that general usage in cement industry and Gypsum factories. Application Use to manufacturer gypsum panel and building plaster Use for Gypsum Boards and ceiling boards Use to make Gypsum Powder (Plaster of Paris) Use to manufacturer cement.
We can offer Gypsum Rocks , Gypsum Powder, Gypsum Crystal from Iran Natural gypsum rocks, Gypsum Powder mesh 150/200, Gypsum Satin Plaster / Siva Plaster.
GOLD Member
VERIFIED
Feb-07-20
(4.6)
Supplier From Ahmedabad, Gujarat, India

Supplier: Refractory bricks, high alumina bricks, acid proof bricks, tiles and castables, all mortars and fire clay, low cement castables, insulating castables, conventional dense refractory bricks, insulation bricks, cold face, hot face insulation bricks, hot face insulation bricks, acid resistant bricks/components, membranes, acid resistant cement, construction chemicals, class 1 ar tiles and bricks 38mm and 75mm, 4457 vitrified ar tiles with 0% water absorption, 20mm & 25m, primer, mastics, pot. silicate cement, coerce cement, furnace based cement, crushed refractory boiler bed material, acid resistant tiles, acid resistant brick fireclay type, acid resistant brick red shale type, bitumen primer, epoxy resin & hardner, furan powder and syrup solution,

Supplier Of Primer Paint   |   Clay Bricks   |   Clay   |   Tiles   |   Construction Chemicals   |   Bricks   |   Refractory Bricks   |   Cement
GOLD Member
VERIFIED
Jun-01-21
Sk-hb K-silicate Mortar & Solution

Sk-Hb K-Silicate Mortar & Solution

(4.6)
Ask for price
MOQ: Not Specified
  Ganeshas Aim Industries Private Limited
Supplier From Ahmedabad, Gujarat, India
Supplier Of Construction Chemicals
 
APPLICATION OF SK-HB K-SILICATE MORTAR :

* K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors.
It is also used for jointing chemical resisting stoneware pipes.
K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles.
The concrete surface needed protection should be dryed, clean and rough.
The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner.

When Bedding and Jointing Materials are the same.
On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints.
The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water.
Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic.
When Bedding and Jointing Materials are Different.
Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR
A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions.

PREPARATIONS OF MORTAR :
* Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan.

* Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar.

* In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared.

* The cement mortar will be used before it starts setting.
GOLD Member
VERIFIED
Jun-01-21
Furan Powder And Syrup Solution

Furan Powder And Syrup Solution

(4.6)
Ask for price
MOQ: Not Specified
  Ganeshas Aim Industries Private Limited
Supplier From Ahmedabad, Gujarat, India
Supplier Of Construction Chemicals
 
This is chemical setting Furan based chemical resistant mortar which is combination of Liquid and Powder, when mixed in proper proportion from workable mortar which after setting and curing give of liquid and give black highly cross linked composites.

Furan When set and cured is resistant to highly corrosive acids, alkalis and to powerful organic solvents such as ketones, Aromatic and Chlorinated solvents. It has extreme resistant to Acidic & alkalis, Salts, Greases and Detergents. It resists to Organic & Inorganic acids at their boiling temperature. It is suitable against mild chlorine Gas (dry) phosphorous trichloride, pyridine at room temperature.
Furan is especially useful where resistance to mixed media such as aqueous acids /alkalis and organic solvents is needed in chemical plant process and waste streams. Carbon filled Furan is used against corrosive effect of hydrofluoric acid & its salts.

PREPARATION OF FURANE MORTAR :
Mortar consist of Furan solution and Furan powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 part by weight Solution & 3 part by weight powder. The ratio will vary slightly depending on temperature and working conditions.Stir the liquid thoroughly before using. Place liquid in a suitable shallow mixing pan. Add powder by weight in the solution mix thoroughly and rapidly until all lumps are dispersed and the mortar is completely homogenous. Spread out the mortar in a thin layer, not more than ¾ thick, to dissipate the heat of reaction and lengthen the working life.
Batch size can be varied depending upon the temperature and the speed with which the masons are working. Very large batches will become stiff quite rapidly. Make sure that all the Furan Motrar is used from the pan before another batch is mixed.When working at temperature above 40 C, very small batches not more than 2 Kgs, should be prepared. When working at temperature below 15C the liquid should be kept warm.
GOLD Member
VERIFIED
Jun-05-21
Phoscast 90xr & Phoscast 60xr

Phoscast 90Xr & Phoscast 60Xr

(4.6)
Ask for price
MOQ: Not Specified
  Ganeshas Aim Industries Private Limited
Supplier From Ahmedabad, Gujarat, India
Supplier Of Builder's Hardware, Construction Material & Equipment
 
* PHOSCAST
Phoscast : Phosphate Bonded Castables

* PURPOSE
customers using FBC boilers (Particularly underbed feed FBC boilers) for the protection of inbed coils against erosion potential by applying highly abrasive resistant refractory on inbed coils above fuel feed system.

BACKGROUND

* Two of such actions are providing special alloy studs on inbed coils and applying highly abrasive resistant refractory on the outer bottom loops of inbed Coils which are above the fuel feed nozzles.

* GANESHAS has taken number of approaches to identify the key factors affecting erosion rates with an objective to enhance the life of inbed tubes as well as implementing the corrective action to reduce the erosion rates.
Phosphate coatings are often used to protect steel parts against rusting and other types of corrosion

* Erosion of inbed coils in fluid bed combustor is unavoidable phenomenon however the rate of metal wastage and thus the life of tubes depends on various factors like ash & fuel properties, design of Combustor / feeding system, flue gas velocities operating conditions etc. It has been also observed that maximum erosion prone inbed coils are those which come above fuel feed nozzles and an area of approximately 1 to 1.5 mts around fuel feed systems are badly affected.

APPLICATION
Phoscast-90 XR can be applied by ramming with wooden mallet having adequately large head @" dia x 5" length x 10â?? Jong handle). The desired lining or repair thickness is built up in several courses while ramming the mass to uniform thickness. Phoscast refractory should never be trawled to obtain smooth surface; ramming only should finish surface. Any excess mass is to be sliced off with trowel edge and then finished by ramming again for bed coil. Tube application of AFBC boiler, the material pasty mass should be finger pressed into the studs of the tube with maximum force. Finish should be given by pressing the hand palm against material applied, using surgical type thin rubber hand gloves.
GOLD Member
VERIFIED
Jun-01-21
Acid Resistant Tiles

Acid Resistant Tiles

(4.6)
Ask for price
MOQ: Not Specified
  Ganeshas Aim Industries Private Limited
Supplier From Ahmedabad, Gujarat, India
Supplier Of Blocks, Tiles & Slabs
 
Acid / Alkali Resistant Tiles/Bricks

* Our Acid proof tiles, Acid alkali resistant tiles, Chemical resistant tiles are fully vitrified tiles which are manufactured using special non ferrous clay, processed at extremely high temperatures this process causes the raw materials to fuse and form a compact mass with an extremely low water absorption of less than 0.5% resulting in the formation of a very strong body with a flexural strength of 38 N/mm2, solid through color fade proof with a very hard surface Mohs hardness of 7.

* The acid resistant tiles come in a range of sizes and thicknesses from ranging from 8-25mm. Our acid proof tiles meet stringent specification norms of IS 4457:2007 and relevant ASTM/DIN standards which ensure excellent performance in Acid/Alkali/Chemical (expect Hydrofluoric acid and its derivatives).

Corrosion Protection Applications
* Factory Floors subject to corrosion from Chemicals, Acids, Oil & Solvents
* Pickling tank and surrounding areas
* Food & Beverage Industry flooring
* Battery rooms and Control rooms
* Demineralization plants
* Walls of washing and Paint shop areas
* Acid Resistant Tiles Manufacturers India
* Our acid proof tiles provide excellent abrasion resistance, anti-skid properties for worker safety and high aesthetic appeal. We also provide specialized corner tiles for reducing chances for acid attack through construction joints. Our standard sizes are 200x100, 200x200 & 300x300 millimeters.
GOLD Member
Mar-30-20
Bentonite

Bentonite

(4.6)
Ask for price
MOQ: Not Specified
  Cementation
Supplier From Gandhidham, Gujarat, India
Supplier Of Bentonite
 
Bentonite as is a particular kind of clay derived from volcanic ash and consists mainly of montmorillonite with minor amount of illite, kaolinite, cristobalite and other minerals. Bentonite has strong colloidal properties and, when in contact with water, increases its volume several fold by swelling, forming a tixotropic, gelatinous substance. Main uses of Bentonite take advantage of these colloidal properties. The main characteristics of Bentonite is its decolorizing power, that is the property of the earth to absorb selectively certain pigments rather than others according to the characteristics of the product to be decolourized(acidity, oxidation degree, origin and biological state etc.)

APPLICATIONS

For Drilling Fluids
Pilling
Binder (e.g. foundry-sand bond, iron ore pelletizer)
Purifier
Electrical Earthing
Agriculture
Cosmetics, Paper, Paints and Ceramics
Absorbent (e.g. pet litter), and
As a Groundwater Barrier.
We CEMENTATION acquire own mines for Bentonite in India. We supply Bentonite for industrial, manufacturing, construction and drilling applications. Our production or supply capacity is more than 250,000 TPA.

At CEMENTATION a special attention is given while mining Bentonite as the materials physical and chemical properties are depended upon the interference of the other metal ions present in the soil.

Once the material sourced from mines are transferred to our factory and are left for drying in an open land to reduce moisture up to the desired level. After the drying process and other checks are done our skilled manpower will do a sorting of the material and then after the material goes to pulverizes for grinding to desired mesh size and are packed according to customers requirement. Our laboratories are well equipped to meet the needs of the diverse markets we serve.

Verification Status

go4WorldBusiness +91-89298-00770 52B, First Floor, Okhla Phase-3 New Delhi, INDIA 110020
© go4WorldBusiness.com