Fiberglass Covered Aluminum Wire: FiberGlass covered Aluminum wire is according to customers requirement, aluminum conductor is evenly covered with one or two layers of non-alkali fiberglass, then itâ??s impregnated in compatible insulating coating of required thermal class baked to make a whole between fiberglass and Aluminum conductor (optionally be applied to polyester and polyamide).
Supplier: Fiberglass
Fiberglass geogrid has high intensity, low elongation ratio and light weight. Geocloth has high permeation, high corrosion resistance, conveninent construction and small weight. Geomembrane intergrates permeation, inverse filter ans drainage functions, and it posses high syntheitc strength , large removal strength and high puncture resistance. According to customer¡¡£¤s needs
Alkali-resistant Fiberglass Mesh is mainly used for EPS board(exterior insulation system of external walls),this products uses the machine-woven material of moderate-alkali or non alkali as material and treats with alkali-resistant coating. The strength and alkali-resistance of the products are very good,and it plays an important role in insulation system,it is mainly used to prevent crack.Because of its good resistance of chemical corrosion such as acid-resistant ans alkali-resistant and high strength of longitude and latitude,it can distribute the stress on the insulation system of external walls,avoid deformation of the insulation system caused by external impact and pressure ,and improve the impact-resistance of the insulation. Besides,ití»s easy to install and quality control,it acts as the "soft steel barin " the insulation system. Ordinary Specification : 1.Mesh Size:4mm*4mm,5mm*5mm; 2.Weight/m2:65g-300g; 3.Length/roll:50m,100m; 4.Width:1m,2m; 5.Color:White(standard,blue,green, or other colors; 6.Packing:Each roll packed into shrink-wrapping plastic bag,then put into carton. 7.Special specification and package can be ordered and produced according to customers requirement. Shrink film packing,then in carton.
Quick information Place of origin: china Description Description Fiberglass yarn Fiberglass yarn is electrical insulation materials, electronic industrial fabrics , tubes and other industrial fabric raw Materials.It is widely used for weaving all kinds of fabrics in the scope of reinforcement, insulation, corrosion resis-tance, heat resistance and so on. Price Price condition : fobprice : us d.2 / sqm Packaging & delivery Packing :opp bag then pla stic wove 10-15 days after received advanced paymentminimum order : 5000 s qm supply ability : 70000 sqm per day. -
Feature of fiberglass grinding disc: we can made varies of grinding wheel from 4inch to 9inch,our grinding wheel are made by high quality abrasives with strong resin bond and high quality fiber glass net,it is sharp ,durable,they are exported to many countries all over the world and received a good reputation from our customer. 1.material:alum oxide 2.speed:80m/s 3.usage:for metal,steel,inox 4.we can make it green,red and black color,or as your requirement. 5.all of our grinding wheel is checked carefully before packing. 6.it is with very high speed,easy to grinding metal,stone,etc. Advantage: 1. competitive price Near the raw materials region, low labor costs, so lower production cost. 2. Locate in the eastern of China,and close to the port. 3. Advanced technique. 4. More than 10 years production experience. 5. Strict quality testing & inspection,good after-sale service. 6. ISO9001:2000 certificate. 7. Abundant export experience. 8. Accept OEM brand. 9. Small order is accepted. Company Information: The company has been established for several years, the marketing system spread all over the country rely on the domestic leading technology and reliable products.It has the world class technology expert, always pay attention to the domestic and foreign advanced technology and the production technology application, so we can obtain the highest quality product with the lower cost. Packing&Shipping: 1. A container can carry 220,000 pieces 2.A box can carry 500 pieces FAQ: 1.How many nets you have for metal cutting disc we use single and double reinforced nets 2.You are Manufacturer or trading company We are Manufacturer of cutting disc and grinding wheel for many years 3.Do you accept OEM for customers brand Yes, we do, but need MOQ for mass production. If take our brand, less qty with mix sizes are accepted. 4.Do you have inspection procedure before shipping: Yes, we do, 100% QC inspection Before Shipment. 5.What is your payment term Usually TT 30% deposit, and clear the balance before shipping or against copy of B/L. 6.What is your port of shipment Qingdao or lianyungang We are being on service of you within 24 hours,welcome your inquiry any time
CYC FIBERGLASS ROVING FOR FRP FILAMENT WINDING CYC Fiberglass Roving for FRP Filament Winding is finished with high performance sizing and compatible with unsaturated polyester(UP), polyurethane, vinyl ester (VE), epoxy (EP) and phenolic resins. It is designed for filament winding process specially and provide fast wet-out in multiple resins with excellent mechanical properties. The typical end-finished products are including FRP water pipes, high pressure oil pipes, chemical corrosion resistant pipes, pressure vessels, gratings, chemical storage tanks, automobile parts, cable trays and other insulation industries. Glass Type: E-CR Glass Roving Type: Singe-end Roving, Direct Roving, Multi-ends Roving, Assembled Roving PRODUCT FEATURES Good strand integrity and even tension Fast wet-out in resin with low resin consumption Inner side unwinding smoothly & low fuzz Excellent tensile strength and mechanical properties TYPICAL PRODUCT SPECIFICATIONS Product Code Filament Diameter (�¼m) Linear Density (tex) Tensile Strength (N/tex) Moisture Content (%) Loss On Ignition (%) Compatible Resin ECY150DF 13~24 600, 1200, 2400 4800, 9600 0.40 0.20 0.55±0.15 UP VE ECY280DF 13~17 1200, 2400, 4800 0.40 0.20 0.55±0.15 UP EP
CYC Fiberglass Direct Roving (ECY150D) for FRP Pultrusion CYC Fiberglass Roving for FRP Pultrusion is finished with high performance silane sizing and compatible with unsaturated polyester(UP), polyurethane, vinyl ester (VE), epoxy (EP) and phenolic resin matrixes. It is designed for weaving, filament winding, pultrusion, extrusion and hand lay-up processes. The typical end-finished products are including various FRP/GRP pipes, pressure vessels, gratings, chemical storage tanks, automobile parts, cable trays and so on. Glass Type: E-CR Glass Filament Diameter: 13, 15, 17, 24, 31�¼m Linear Density: 300, 600, 900, 1200, 2400, 4800, 9600tex Product Features: Good strand integrity and even tension Fast and complete wet-out in resins. Inner side unwinding smoothly & no fuzz Excellent tensile strength and mechanical properties TYPICAL PRODUCT SPECIFICATIONS Product Code Filament Diameter (m) Linear Density (tex) Tensile Strength (N/tex) Moisture Content (%) Loss On Ignition (%) Compatible Resin ECY150D-300 13 300 0.40 0.10 0.55±0.15 UP/VE/PF/EP ECY150D-600 15 600 0.40 0.10 0.5 0.15 UP/VE/PF/EP ECY150D-900 17 900 0.40 0.10 0.55±0.15 UP/VE/PF/EP ECY150D-1200 17 1200 0.40 0.10 0.55±0.15 UP/VE/PF/EP ECY150D-2400 24 2400 0.40 0.10 0.55±0.15 UP/VE/PF/EP ECY150D-4800 24 4800 0.40 0.10 0.55±0.15 UP/VE/PF/EP
It is an ideal reinforcement materials used for bituminous waterproof membrance. Materials:cotton/fiberglass mesh Usage:widely used in flooring, underground bridgeí»s surface and waterproof projectú¼antiseptic conduct of the buildingsí»base.
Netlike fiberglass cloth reinforced for grinding wheel It is used for making fiberglass netlike disc which reinforced for grinding wheel.The fabric possesses the features of high strength, level and smooth surface , compatible with phenolic resin and epoxy resinand good wet-out .Lay on horizontal , not on end during stock and transportation. Mass:60---480g/m2, Mesh density:2*2---14*14mesh/inch, Width:60---180cm, Weave: plain or leno. Detail style upon customerf+s request. Warning: store roll no on end!! Netlike fiberglass disc reinforced for grinding wheel It is widely used as the basal material of grinding wheel which adopts resin as adhesive agent. The grinding wheel which is made with this basal material has properties of excellent heat resistance, cutting at high speed and great structural strength. Warning: store disc in cool, dry location and out of direct sunlight. All of transportation with refrigiration container!!! Style of fiberglass disc Volatiles content Insolubles content Resin content
