ASTM/AISI Standard Alloy Round Bar AISI 4140 is a chromium molybdenum alloy steel specification widely used in the oil and gas industry. Similar to grade AISI 4130 but with a slightly higher carbon content. American Iron and Steel Institute (AISI 4140) is a member of the low alloy tool steel family characterized by small quantities of trace elements added to an otherwise simple steel. These trace elements, when compared with more simple steel such as 1040, improves the characteristics of 4140 . However, because 4140 remains relatively simple, it is used in a wider range of applications than more specialized tool steels like the D or S series of steel. Specifications · Grade: Alloy steel · Standard: AISI, ASTM, BS, DIN, GB, JIS · OD:10-500mm · Thickness: Max:800mm · Width: 205mm~2300mm · Length: 1000mm~6000mm · Place of Origin: China (Mainland) · Model Number: 1.7220 / SCM430 / 30CrMo4 / 4130 ; 4140/42CrMo4/1.7225; En24 34CrNiMo6 1.6582 4340. · Application: Mould steel · Technique: Forged · Special Use: Mold Steel ,Statically and dynamically stressed components for vehicles, engines and machines. For parts of larger cross-sections, crankshafts, gears. · Shape: Round bars/Flat bar/Plate · Technology: Hot Rolled/Forged/Clod Draw · Heat treatment: Annealing/Q+T · Surface treatment:Black/Peeling/Polishing/Machined · Delivery condition: Hot rolled or forged/ Peeled or black surface/annealed or QT · Customer's logo: Available · Test: SGS/UT100%/Elements testing · Certificate: ISO/Mill certificate · Experience: Ten years manufacturer experience General Scope One of the most popular alloys for Oil Field applications, a high proportion of which is in Tubular form for downhole tools and accessories.
Alloy Pipes Specification: ASTM A335 is a ASTM standard specifies Seamless Ferritic Alloy Steel Pipe for High-Temperature Service. ASTM A335 pipe ordered to this specification shall be suitable for bending and similar forming operations, and for fusion welding. Selection will depend upon design, service conditions, mechanical properties, and high-temperature characteristics. Steel Grade: ASTM A335 GR P5 | GR P9 | GR P11 | GR P22 | GR P91 | GR P92. Size (mm): O.D.: 51-508; W.T.:7~60; L: max 12000 and other specifications in accordance with customer requirements. Size (mm) we can supply: Hot-rolled: O.D.: 51-508; W.T.:7~60; L: max 16000 Cold-drawn: O.D.: 10-50; W.T.:2~10; L: max 16000 Hot-expanded:O.D.: 325-1020; W.T.:6~50; L: max 12000 and other specifications in accordance with customer requirements. Packing: Beveled/black painting/ plastic caps/ in bundles/ steel strips/ wooden protection Inspection and Test: Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength, Yield Strength,Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test, Nodestructive Test, Hydrostatic Test. Surface Treatment: Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting,Epoxy & Fbe Coating Painting as requested. Mechanical Properties: Standard Steel Grade Tensile Strength (MPa) Yield Strength (MPa) Elongation (%) Impact Energy(J) Rigidity ASME SA335 SA335 P11 =415 =205 =22 =35 =163HB SA335 P12 =415 =220 =22 =35 =163HB SA335 P22 =415 =205 =22 =35 =163HB SA335 P5 =415 =205 =22 =35 =187HB SA335 P91 585~760 =415 =20 =35 =250HB SA335 P92 =620 =440 =20 =35 =250HB Grade and Chemical Composition (%) Grade C Mn P, S, max Si Cr Mo P11 0.05-0.15 0.30-0.60 0.025 0.50-1.00 1.00-1.50 0.44-0.65 P22 0.05-0.15 0.30-0.60 0.025 0.50 max 1.90-2.60 0.87-1.13 P5 0.15 max 0.30-0.60 0.025 0.50 max 4.00-6.00 0.45-0.65 P9 0.15 max 0.30-0.60 0.025 0.25-1.00 8.00-10.00 0.90-1.10 P91 0.08-0.12 0.30-0.60 0.020/0.010 0.20-0.50 8.00-9.50 0.85-1.05 V 0.18-0.25 N 0.03-0.07 Ni 0.40 max Al 0.02 max Nb 0.06-0.10 Ti 0.01 max P92 0.07-0.13 0.30-0.60 0.020/0.010 0.50 max 8.50-9.50 0.30-0.60 V 0.15-0.25 N 0.03-0.07 Ni 0.40 max Al 0.02 max Nb 0.04-0.09 W 1.50-2.00 B 0.001-0.006 Ti 0.01 max Zr 0.01 max Ordering Information Orders for material under this specification should include the following, as required, to describe the desired material adequately: Quantity Feet, meters, or number of lengths Name of material Seamless Alloy Steel Pipe Grade STANDARD AND STEEL GRADE Manufacture Hot-finished or cold-drawn Size using one of the following: NPS and Schedule Number Outside Diameter and Nominal Wall Thickness Length Specific or Random End Finish
ASTM/ASME Standard Alloy Pipes Specification: ASTM A519- specification covers for several grades of carbon and alloy steel mechanical tubing, either hot-finished or cold-finished. The steel used in the mechanical tubing may be cast in ingots or may be strand cast. When steel of different grades is sequentially strand cast, identification of the resultant transition material is required. The seamless tubing is a tubular product made without a welded seam. It is usually manufactured by hot working steel, and if necessary, by subsequently cold finishing the hot-worked tubular product to produce the desired shape, dimensions and properties. The tubes shall be furnished in the following shapes: round, square, rectangular and special sections. Heat analysis shall be made to determine the percentages of the elements specified. If secondary melting processes are used, the heat analysis shall be obtained from one remelted ingot or the product of one remelted ingot of each primary melt. The tubing shall be coated with a film of oil before shaping to retard rust when specified.
ASTM/ASME Standard Alloy Pipes Specification: ASTM A213M-09 Standard Specication for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, Heat-Exchanger Tubes. This standard is issued under the fixed designation A 213/A 213M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (') indicates an editorial change since the last revision or reapproval. Size (mm) we can supply: Hot-rolled: O.D.: 51-508; W.T.:7~60; L: max 16000 Cold-drawn: O.D.: 10-50; W.T.:2~10; L: max 16000 Hot-expanded:O.D.: 325-1020; W.T.:6~50; L: max 12000 and other specifications in accordance with customer requirements. Packing: Beveled/black painting/ plastic caps/ in bundles/ steel strips/ wooden protection Inspection and Test: Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength, Yield Strength,Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test, Nodestructive Test, Hydrostatic Test. Surface Treatment: Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting, Epoxy & Fbe Coating Painting as requested. Mechanical properties: Steel Grade Tensile StrengthN/mm2(min) Yield StrengthN/mm2(min) Elongation % (min) TP304 515 205 35 TP304L 485 170 35 TP316 515 205 35 TP316L 485 170 35 TP321 515 205 35 T11 =415 =205 30 T12 =415 =220 --- T13 =415 =205 30 Chemical Composition(%, max) Steel Grade C Si Mn Cr Ni Mo S P TP304 0,08 0,75 2 18 - 20 8 - 11 - 0,03 0,04 TP304L 0,035 0,75 2 18 - 20 8 - 13 - 0,03 0,04 TP316 0,08 0,75 2 16 - 18 11 - 14 2 - 3 0,03 0,04 TP316L 0,035 0,75 2 16 - 18 10 - 15 2 - 3 0,03 0,04 TP321 0,08 0,75 2 17 - 20 9 - 13 - 0,03 0,04 T11 0.05-0.15 0.50-1.00 0.30-0.60 0.5-1.0 --- 1.0-1.5 =0.25 =0.025 T12 0.05-0.15 =0.50 0.30-0.61 0.80-1.25 --- 0.44-0.65 =0.25 =0.025 T13 0.05-0.15 =0.50 0.30-0.60 1.90-2.60 --- 0.87-1.13 =0.25 =0.025 Ordering Information Orders for material under this specification should include the following, as required, to describe the desired material adequately: Quantity Feet, meters, or number of lengths Name of material Seamless Alloy Steel Pipe Grade STANDARD AND STEEL GRADE Manufacture Hot-finished or cold-drawn Size using one of the following: NPS and Schedule Number Outside Diameter and Nominal Wall Thickness Length Specific or Random End Finish
ASTM/ASME Standard Alloy Pipes AISI 4140 is a chromium molybdenum alloy steel specification widely used in the oil and gas industry. Similar to grade AISI 4130 but with a slightly higher carbon content. American Iron and Steel Institute (AISI 4140) is a member of the low alloy tool steel family characterized by small quantities of trace elements added to an otherwise simple steel. These trace elements, when compared with more simple steel such as 1040, improves the characteristics of 4140 . However, because 4140 remains relatively simple, it is used in a wider range of applications than more specialized tool steels like the D or S series of steel. Heat Treatment AISI 4140 has enough carbon present to allow for adequate heat treatment. Recommended hardening procedures are to bring the steel up to 1,675 degrees Fahrenheit for normalization (removal of stress within the steel). After it cools properly, heat the steel to 1,550 degrees Fahrenheit before quenching it in oil. The toughness of the steel makes machining in its hardened form difficult. However, after annealing the steel at 1,600 degrees followed by a slow cooling, the steel is much softer and far easier to machine. It can then be heat-treated after machining to produce a hard, precise item. Applications
Alloy Pipes GB/T8162 GB/T8163 GB3087 GB6479 GB9948 GB5310 GB/T17396 20G, 20MnG, 25MnG, 15MoG, 12Cr2MoG, 15CrMoG, 12Cr1MoVG, 12Cr2MoWVTiB, 10Cr9Mo1VNb Size (mm) we can supply: Hot-rolled: O.D.: 51-508; W.T.:7~60; L: max 16000 Cold-drawn: O.D.: 10-50; W.T.:2~10; L: max 16000 Hot-expanded:O.D.: 325-1020; W.T.:6~50; L: max 12000 and other specifications in accordance with customer requirements. Packing: Beveled/black painting/ plastic caps/ in bundles/ steel strips/ wooden protection Inspection and Test: Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength, Yield Strength,Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test, Nodestructive Test, Hydrostatic Test. Surface Treatment: Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting, Epoxy & Fbe Coating Painting as requested. Ordering Information Orders for material under this specification should include the following, as required, to describe the desired material
ASTM/ASME Standard Alloy Pipes Specification: Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service. ASTM A333 standard covers wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures. ASTM A333 alloy pipe shall be made by the seamless or welding process with the addition of no filler metal in the welding operation. All seamless and welded pipes shall be treated to control their microstructure. Tensile tests, impact tests, hydrostatic tests, and nondestructive electric tests shall be made in accordance to specified requirements. Size (mm) we can supply: Hot-rolled: O.D.: 51-508; W.T.:7~60; L: max 16000 Cold-drawn: O.D.: 10-50; W.T.:2~10; L: max 16000 Hot-expanded:O.D.: 325-1020; W.T.:6~50; L: max 12000 and other specifications in accordance with customer requirements. Packing: Beveled/black painting/ plastic caps/ in bundles/ steel strips/ wooden protection Inspection and Test: Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength, Yield Strength,Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test, Nodestructive Test, Hydrostatic Test. Surface Treatment: Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting, Epoxy & Fbe Coating Painting as requested.
ASTM/ASME Standard Alloy Pipes AISI 4130 is a low alloy steel containing molybdenum and chromium as strengthening agents. The carbon content is nominally 0.30% and with this relatively low carbon content the alloy is excellent from the fusion weldability standpoint. The ASTM A519 4130alloy can be hardened by heat treatment. We offers an extensive range of ASTM A519 4130seamless mechanical tubing is manufactured to meet your specific application requirements. Controlled modifications and adjustments are made to the tube making process for each order and take into consideration end use and all finishing operations (including heat treatment) that will be performed after you have received the tubing. General Scope This grade is similar to 4140 in scope which has a higher carbon level giving 4130 an advantage when it comes to weldability, this weldability is achieved at the cost of through section hardenability. AISI 4130 steel is a low alloy steel that is used in structural designs that may be found in applications such as aircraft engine mounts or welded tubing. It is well known for its ease of welding and ability to harden in commercial applications. It is commonly referred to as chromium-molybdenum steel. Size (mm) we can supply: Hot-rolled: O.D.: 51-508; W.T.:7~60; L: max 16000 Cold-drawn: O.D.: 10-50; W.T.:2~10; L: max 16000 Hot-expanded:O.D.: 325-1020; W.T.:6~50; L: max 12000 and other specifications in accordance with customer requirements. Packing: Beveled/black painting/ plastic caps/ in bundles/ steel strips/ wooden protection Inspection and Test: Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength, Yield Strength,Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test, Nodestructive Test, Hydrostatic Test. Surface Treatment: Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting, Epoxy & Fbe Coating Painting as requested. Composition Specifications of AISI 4130 Range C Si Mn P S Cr Mo Min 0.28 0.15 0.4 - - 0.8 0.15 Max 0.33 0.35 0.6 0.035 0.04 1.1 0.25 Mechanical Specifications of AISI 4130 Condition Hardened & Tempered UTS 100KSI min 0.2% Proof Stress 80KSI min Elongation 20% min Reduction of Area 40% min Ordering Information Orders for material under this specification should include the following, as required, to describe the desired material adequately: Quantity Feet, meters, or number of lengths Name of material Seamless Alloy Steel Pipe Grade STANDARD AND STEEL GRADE Manufacture Hot-finished or cold-drawn Size using one of the following: NPS and Schedule Number Outside Diameter and Nominal Wall Thickness Length Specific or Random End Finish
European Standard Alloy Pipes Seamless steel tubes for pressure purposes · EN 10216-1 Non-alloy steel tubes with specified room temperature properties · EN 10216-2 Non alloy and alloy steel tubes with specified elevated temperature properties · EN 10216-3 Alloy fine grain steel tubes · EN 10216-4 Non-alloy and alloy steel tubes with specified low temperature properties · EN 10216-5 Stainless steel tubes DIN EN 10216-1 Seamless steel tubes for pressure purposes–Technical delivery conditions-Part 1: Non-alloy steel tubes with specified room temperature properties Specifies the technical delivery conditions for two qualities, T1 and T2, of seamless tubes of circular cross section, with specified room temperature properties, made of non-alloy quality steel… DIN EN 10216-2 Seamless steel tubes for pressure purposes–Technical delivery conditions – Part 2: Non alloy and alloy steel tubes with specified elevated temperature properties; German version EN 10216-2:2002+A2:2007 The document specifies the technical delivery conditions in two test categories for seamless tubes of circular cross section, with specified elevated temperature properties, made of non-alloy and alloy steel. DIN EN 10216-3 Seamless steel tubes for pressure purposes-Technical delivery conditions – Part 3: Alloy fine grain steel tubes Specifies the technical delivery conditions in two categories for seamless tubes of circular cross section, made of weldable alloy fine grain steel DIN EN 10216-4 Seamless steel tubes for pressure purposes –Technical delivery conditions -Part 4: Non-alloy and alloy steel tubes with specified low temperature properties Specifies the technical delivery conditionsin two categories for seamless tubes of circular crossection, made with specified low temperature properties, made of non-alloy and alloy steel… DIN EN 10216-5 Seamless steel tubes for pressure purposes–Technical delivery conditions-Part 5: Stainless steel tubes; German version EN 10216-5:2004, Corrigendum to DIN EN 10216-5:2004-11; German version EN 10216-5:2004/AC:2008 This Part of this European Standard specifies the technical delivery conditions in two test categories for seamless tubes of circular cross-section made of austenitic (including creep resisting steels) and austenitic-ferritic stainless steel which are applied for pressure and corrosion resisting purposes at room temperature, at low temperatures or at elevated temperatures. It is important that the purchaser, at the time of enquiry and order, takes in account the requirements of the relevant national legal regulations for the intended application.
European Standard Alloy Pipes DIN 17175 alloy steel pipe is just a big class,and it has many classifivations. We mainly produce DIN 17175 ST35.8, DIN 17175 ST45.8, and 10CrMo910 steel pipes. This alloy steel pipe is just a big class,and it has many classifivations. We mainly produce DIN 17175 ST35.8,DIN 17175 ST45.8, and 10CrMo910 steel pipes. Steel grade: · DIN17175 St35.8 · DIN17175 St45.8 · 15Mo3 · 13CrMo44 · 10CrMo910 Size (mm) we can supply: Hot-rolled: O.D.: 51-508; W.T.:7~60; L: max 16000 Cold-drawn: O.D.: 10-50; W.T.:2~10; L: max 16000 Hot-expanded:O.D.: 325-1020; W.T.:6~50; L: max 12000 and other specifications in accordance with customer requirements. Packing: Beveled/black painting/ plastic caps/ in bundles/ steel strips/ wooden protection Inspection and Test: Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength, Yield Strength,Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test, Nodestructive Test, Hydrostatic Test. Surface Treatment: Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting, Epoxy & Fbe Coating Painting as requested.