ASTM/ASME Standard Alloy Pipes
Specification:
ASTM A213M-09 Standard Specication for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, Heat-Exchanger Tubes.
This standard is issued under the fixed designation A 213/A 213M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (') indicates an editorial change since the last revision or reapproval.
Size (mm) we can supply:
Hot-rolled: O.D.: 51-508; W.T.:7~60; L: max 16000
Cold-drawn: O.D.: 10-50; W.T.:2~10; L: max 16000
Hot-expanded:O.D.: 325-1020; W.T.:6~50; L: max 12000 and other specifications in accordance with customer requirements.
Packing:
Beveled/black painting/ plastic caps/ in bundles/ steel strips/ wooden protection
Inspection and Test:
Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength, Yield Strength,Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test, Nodestructive Test, Hydrostatic Test.
Surface Treatment:
Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting, Epoxy & Fbe Coating Painting as requested.
Mechanical properties:
Steel Grade Tensile StrengthN/mm2(min) Yield StrengthN/mm2(min) Elongation % (min)
TP304 515 205 35
TP304L 485 170 35
TP316 515 205 35
TP316L 485 170 35
TP321 515 205 35
T11 =415 =205 30
T12 =415 =220 ---
T13 =415 =205 30
Chemical Composition(%, max)
Steel Grade C Si Mn Cr Ni Mo S P
TP304 0,08 0,75 2 18 - 20 8 - 11 - 0,03 0,04
TP304L 0,035 0,75 2 18 - 20 8 - 13 - 0,03 0,04
TP316 0,08 0,75 2 16 - 18 11 - 14 2 - 3 0,03 0,04
TP316L 0,035 0,75 2 16 - 18 10 - 15 2 - 3 0,03 0,04
TP321 0,08 0,75 2 17 - 20 9 - 13 - 0,03 0,04
T11 0.05-0.15 0.50-1.00 0.30-0.60 0.5-1.0 --- 1.0-1.5 =0.25 =0.025
T12 0.05-0.15 =0.50 0.30-0.61 0.80-1.25 --- 0.44-0.65 =0.25 =0.025
T13 0.05-0.15 =0.50 0.30-0.60 1.90-2.60 --- 0.87-1.13 =0.25 =0.025
Ordering Information
Orders for material under this specification should include the following, as required, to describe the desired material adequately:
Quantity Feet, meters, or number of lengths
Name of material Seamless Alloy Steel Pipe
Grade STANDARD AND STEEL GRADE
Manufacture Hot-finished or cold-drawn
Size using one of the following:
NPS and Schedule Number
Outside Diameter and Nominal Wall Thickness
Length Specific or Random
End Finish
HEUBACH INTERNATIONALis one of the largest exporter, manufacturer and supplier of Alloy Steel Pipe and Tubes in India. These AS pipes and tubes are used in a dissimilar series of industries which comprise Heat-Exchangers, Oil & Gas, Power, Fertilizers, Water Treatment, Paper and Pulp, Pharmaceuticals, Chemicals, Sugar, Food Processing, Dairy, etc. Furthermore, we ensure that our products meet the standings by means of the standards and norms distinct in the industry Alloy Steel Pipes & Tubes: ASTM A335 P11 alloy pipe ASTM A335 P22 alloy pipe A335 P5 High pressure pipes ASTM A335 P9 alloy pipe ASTM A335 P91 alloy pipe ASTM A335 P92 alloy pipes ASTM A333 Gr.1 seamless pipe ASTM A333 Gr.4 seamless pipe ASTM A333 Gr.6 seamless pipe ASTM A213 Alloy tubes ASTM A213 T9 alloy pipes ASTM A213 T5 alloy pipes ASTM A213 T11 alloy pipes ASTM A335 P11 alloy pipe ASTM A213 T12 alloy pipes ASTM A213 T91 alloy pipes ASTM A213 T22 alloy pipes ASTM A335 Grade P22 Alloy Steel Pipe ASME SA335 Grade P5 ASTM A335 P11 ASTM A335 P12 ASTM A335 Grade P91 NACE ASME SA213 Grade T11 SA335 Grade P9 Alloy Steel P9 Seamless Pipes Alloy Steel Pipes/ Chrome Moly Tubes Alloy Steel T91 Seamless Pipes ASTM A213 T2, T11, T22, T91, T92 Pipes ASTM A335 P5, P9, P11, P22, P91 Pipes ASTM A/ASME SA335 Grade P5, P9, P11, P22, and P91/ ASTM A213 heater tubes in grades T5, T9, T12, T22, T91, T92 Sizes: Schedule 20, Schedule 30, Schedule STD, Schedule 40, Schedule 60, Schedule 80, Schedule 100, Schedule 120, Schedule 160, Schedule XXS Also available high quality Chrome Moly Alloy A213 / SA213 heater tubes with black painting, anti-corrosion oil and galvanised finish. ASTM A213/ASME SA213 T2, T11, T12, T22, T91, T92 Seamless Steel Tubes Specifications/ Inventory and Size RangeAlloy Steel Tubes/Tubing End Connections for Line Pipes: Plain, Bevel, Screwed, Threaded Type: Seamless / ERW / Welded / Fabricated / CDW Form: Round Pipes/Tubes, Square Pipes/Tubes, Rectangular Pipe/Tubes, Coiled Tubes, "U" Shape, Pan Cake Coils, Hydraulic Tubes Length: Single Random, Double Random & Required Length, Custom Size - 12 Meter lengths End: Plain End, Beveled End, Treaded End Protection: Plastic Caps Inspection, Test Reports: Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports, Destructive Test Report, Non Destructive Test Reports, India Boiler Regulations (IBR) Test Certificate Details: Descripstion Grade Size SCH Brand PRICE PER TON IN USD ALLOY STEEL TUBE A213 T11, T12, T5, T9, T22, T91 12.7 MM TO 168.3 2MM TO 20MM NSSMC JAPAN, ISMT INDIA, V&M FRANCE 4200 TO 4600 ALLOY STEEL PIPE A335 P5, P9, P11, P12, P22, P91, A691 1/2" TO 24" SMLS & 16" TO 48" ERW 10, 20, 30, STD, 40, 60, XS, 80, 100, 120, 140, 160, XXS NSSMC JAPAN, ISMT INDIA, V&M FRANCE, TENARIS ITALY 3000 TO 5000
ASTM A335 Chrome-Moly Seamless Pipe Specifications ASTM A335 Pipe (ASME S/A335, Chorme-Moly) is a seamless ferritic Alloy-Steel Pipe for high temperature service. Pipe ordered to this specification shall be suitable for bending, flanging (vanstoning), and similar forming operations, and for fusion welding. Sometimes referred to as â??P Gradeâ??, chome moly pipe is popular in P-Grades P5, P9, P11, P22, and P91. The most common use of grades P11, P22, and P91 is in the power industry and petro-chemical plants, Grades P5 and P9 are commonly used in refineries. Federal Steel Supply stocks a full range of the following A335 pipe grades Types Of Available Products GRADES Alloy Steel Grade P5 Seamless Pipes Alloy Steel Grade T5 Seamless Tubing ASTM A213 Alloy Steel Seamless Tubes A335 AS Seamless Pipes Suppliers ASTM A691 Alloy Steel EFW Pipes Manufacturer A335 Alloy Steel Rectangular Seamless Pipes Manufacturer ASTM A213 Gr T9 Alloy Steel Rectangular Tubes Grade P1 Alloy Steel Seamless Pipes Distributors GR T11 Alloy Steel Coiled Seamless Tubing Top Quality Alloy Steel Heat Ex-changer Tubes Alloy Steel T11 Round Tubing Exporter ASTM A335 Gr P9 Alloy Steel Square Seamless Pipes ASME TP Alloy Steel Electric Fusion Welding Pipes Gr T12 AS EFW Tubing Stockiest in India Alloy Steel T22 Cold Rolled Coiled Tubing ASTM A213 GR T91 Alloy Steel Tubing SS Austenitic Alloy Steel Pipes & Tubes Grade P11 Alloy Steel Seamless Pipes Dealers ASTM A213 Alloy Steel T5B Capillary Tube Alloy Steel U Shaped Tubing Stockholder Dimensions : ASTM, ASME and API Specifications : ASTM A/ASME SA335, A213, A691 Pipes Size : 1 / 8NB TO 26NB IN Tubing Size : 1 / 2â?? OD up to 5â?? OD, customs diameters also available Outer Diameter : 6-2500mm; WT:1-200mm Length : Single Random, Double Random & Required Length Specialized in : Large Diameter Size Schedule : SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS Specifications : ASTM A/ASME SA335, A213, A691 Pipes Size : 1 / 8NB TO 26NB IN Tubing Size : 1 / 2â?? OD up to 5â?? OD, customs diameters also available Outer Diameter : 6-2500mm; WT:1-200mm Length : Single Random, Double Random & Required Length Specialized in : Large Diameter Size Grade : ASTM A335 Gr. P5, P9, P11, P12, P21, P22 & P91, ASTM A213 â?? T5, T9, T11, T12, T22, T91, ASTM A691
Classification : Hastelloy Alloy Hastelloy Alloy Pipe is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungst en content give good resistance to reducing media.Hastelloy Alloy Pipe is particularly useful for resistance to pitting and crevice corrosion in acid-halide environments.
Classification : Hastelloy Alloy Hastelloy Alloy Pipe is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungst en content give good resistance to reducing media.Hastelloy Alloy Pipe is particularly useful for resistance to pitting and crevice corrosion in acid-halide environments.
Classification : Monel Alloy 1.According to the preparation process can be divided into deformation superalloys, casting superalloys and powder metallurgy superalloys. 2.According to the strengthening mode, there are solid solution strengthening type, precipitation strengthening type, oxide dispersion strengthening type and fiber strengthening type, etc.
Alloy ASTM SCH40 DN50 pipe ells 1. Alloy pipes, high-pressure carbon steel pipes, and cryogenic pipes for petrochemical power industry 1) Cr5Mo (STFA25 STBA25 STPA25 T5 P5) 2) 15CrMo (STFA22 STPA22 STBA22 T12 P12) 3) 1.25Cr0.5Mo (STFA23 STPA23 STBA23 T11 P11) 4) 12Cr1MoV (12Cr1MoVG) 5) 12Cr2Mo (10CrMo910 T22 P22) 6) T91 (P91) 7) 102[12Cr2MoWTiB(R102)] 8) Cr9Mo (STFA26 P9) 9) High temperature and high pressure pipe: SA106B (ST45.8 ¢20G) SA-210C 10) Cryogenic tube A333GR1 A333GR6 A333GR3 11) Stainless steel for high temperature: TP304H TP321H 12) High temperature alloy 1CR25NI32 Incoloy800H (B407 NO8810) 0CR25NI20 (310S) 0CR23NI13 (309S) 1CR15NI75 (Incoloy600) High temperature pressure centrifugal casting tube: HH30 HH33A HI35 HK30 HK40 HL30 HL40 Nickel tube: N8 (NO2200) High Nickel Alloy Tube: NCU28-2.5 (MONEL 400) Pure titanium tube: TAL(TP28/CR1) TA2(TP35/CR2) TA3(TP49/CR3) Copper Nickel Alloy Tubes, Plates, Rods: BFE10 BFE30 2. Stainless steel pipe and plate 0Cr18NI9(304/304H) 00Cr19Ni9(304L) 1Cr18Ni9Ti(321/321H)0Cr17Ni12Mo2Ti(316/316H) 00Cr18Ni14Mo2(316L) 3. Alloy steel pipe and alloy plate 12Cr1MoVG 15CrMoG .Cr5Mo. A387 GR11 4. Bridges, grids, workshops Special seamless steel pipes, rectangular pipes and square pipes for steel structures. 20#, 16Mn (Q345B C D E ) 5. Special pipes for machining and hydraulic support pipes. 20#, 35#, 45#, 27SiMn, 35CrMo, 42CrMo 6. Carbon steel pipe 1) ASTM106 series, A53 series, API line pipe, ST45.8/ ¢ high temperature and high pressure pipe SA-210C, A333GR1 GR6 GR3 low temperature pipe 2) Seamless steel pipe material: (10#, 45#, 20#, 35#, 16MnQ345 (A, B, C, D, E), machined pipe 27SiMn, 42CrMo, 35CrMO, Dz40, J55/K55, N80 ( Q), L80, N80-1 Specifications: outer diameter �¤6mm-1080mm wall thickness 1.5mm-120mm
Alloy Pipes Specification: ASTM A335 is a ASTM standard specifies Seamless Ferritic Alloy Steel Pipe for High-Temperature Service. ASTM A335 pipe ordered to this specification shall be suitable for bending and similar forming operations, and for fusion welding. Selection will depend upon design, service conditions, mechanical properties, and high-temperature characteristics. Steel Grade: ASTM A335 GR P5 | GR P9 | GR P11 | GR P22 | GR P91 | GR P92. Size (mm): O.D.: 51-508; W.T.:7~60; L: max 12000 and other specifications in accordance with customer requirements. Size (mm) we can supply: Hot-rolled: O.D.: 51-508; W.T.:7~60; L: max 16000 Cold-drawn: O.D.: 10-50; W.T.:2~10; L: max 16000 Hot-expanded:O.D.: 325-1020; W.T.:6~50; L: max 12000 and other specifications in accordance with customer requirements. Packing: Beveled/black painting/ plastic caps/ in bundles/ steel strips/ wooden protection Inspection and Test: Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength, Yield Strength,Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test, Nodestructive Test, Hydrostatic Test. Surface Treatment: Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting,Epoxy & Fbe Coating Painting as requested. Mechanical Properties: Standard Steel Grade Tensile Strength (MPa) Yield Strength (MPa) Elongation (%) Impact Energy(J) Rigidity ASME SA335 SA335 P11 =415 =205 =22 =35 =163HB SA335 P12 =415 =220 =22 =35 =163HB SA335 P22 =415 =205 =22 =35 =163HB SA335 P5 =415 =205 =22 =35 =187HB SA335 P91 585~760 =415 =20 =35 =250HB SA335 P92 =620 =440 =20 =35 =250HB Grade and Chemical Composition (%) Grade C Mn P, S, max Si Cr Mo P11 0.05-0.15 0.30-0.60 0.025 0.50-1.00 1.00-1.50 0.44-0.65 P22 0.05-0.15 0.30-0.60 0.025 0.50 max 1.90-2.60 0.87-1.13 P5 0.15 max 0.30-0.60 0.025 0.50 max 4.00-6.00 0.45-0.65 P9 0.15 max 0.30-0.60 0.025 0.25-1.00 8.00-10.00 0.90-1.10 P91 0.08-0.12 0.30-0.60 0.020/0.010 0.20-0.50 8.00-9.50 0.85-1.05 V 0.18-0.25 N 0.03-0.07 Ni 0.40 max Al 0.02 max Nb 0.06-0.10 Ti 0.01 max P92 0.07-0.13 0.30-0.60 0.020/0.010 0.50 max 8.50-9.50 0.30-0.60 V 0.15-0.25 N 0.03-0.07 Ni 0.40 max Al 0.02 max Nb 0.04-0.09 W 1.50-2.00 B 0.001-0.006 Ti 0.01 max Zr 0.01 max Ordering Information Orders for material under this specification should include the following, as required, to describe the desired material adequately: Quantity Feet, meters, or number of lengths Name of material Seamless Alloy Steel Pipe Grade STANDARD AND STEEL GRADE Manufacture Hot-finished or cold-drawn Size using one of the following: NPS and Schedule Number Outside Diameter and Nominal Wall Thickness Length Specific or Random End Finish
ASTM/ASME Standard Alloy Pipes Specification: ASTM A519- specification covers for several grades of carbon and alloy steel mechanical tubing, either hot-finished or cold-finished. The steel used in the mechanical tubing may be cast in ingots or may be strand cast. When steel of different grades is sequentially strand cast, identification of the resultant transition material is required. The seamless tubing is a tubular product made without a welded seam. It is usually manufactured by hot working steel, and if necessary, by subsequently cold finishing the hot-worked tubular product to produce the desired shape, dimensions and properties. The tubes shall be furnished in the following shapes: round, square, rectangular and special sections. Heat analysis shall be made to determine the percentages of the elements specified. If secondary melting processes are used, the heat analysis shall be obtained from one remelted ingot or the product of one remelted ingot of each primary melt. The tubing shall be coated with a film of oil before shaping to retard rust when specified.
ASTM/ASME Standard Alloy Pipes Specification: Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service. ASTM A333 standard covers wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures. ASTM A333 alloy pipe shall be made by the seamless or welding process with the addition of no filler metal in the welding operation. All seamless and welded pipes shall be treated to control their microstructure. Tensile tests, impact tests, hydrostatic tests, and nondestructive electric tests shall be made in accordance to specified requirements. Size (mm) we can supply: Hot-rolled: O.D.: 51-508; W.T.:7~60; L: max 16000 Cold-drawn: O.D.: 10-50; W.T.:2~10; L: max 16000 Hot-expanded:O.D.: 325-1020; W.T.:6~50; L: max 12000 and other specifications in accordance with customer requirements. Packing: Beveled/black painting/ plastic caps/ in bundles/ steel strips/ wooden protection Inspection and Test: Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength, Yield Strength,Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test, Nodestructive Test, Hydrostatic Test. Surface Treatment: Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting, Epoxy & Fbe Coating Painting as requested.
