PME 5,000 psi W.P. 10,000 psi Test- Grade D- 12,500 psi Minimum Burst PME 7,500 psi W.P. 15,000 psi Test- Grade E- 18,750 psi Minimum Burst Flexible connection between standpipe and swivel (Rotary Drilling) or between pump and standpipe (Rotary Vibrator) for pumping mud at extra high pressure in oil drilling and exploration work. Meets the high demands of directional drilling and down linking with negative pressure pulses and elevated temperatures. This hose can also be used as a Motion Compensator hose for stabilization of rotarydrilling and pumping equipment against vertical wave action on offshore drill platforms. The Motion Compensator hose is not recommended for phosphate ester fluids. Certification/Standards:API Spec 7K ISO 14693 ABS approval
Purpose suitable for rotary hose for flexible connection between the top of the drilling riser and the vertically movable water faucet in the oil drilling and mud delivery systems, and for the adjustment of installing error between the drilling pump line and the riser for the connection and vibration isolation. It is also suitable for delivering in large quantity at high pressure the water based or oil-based mud with the min. Aniline point at 66 pumped out of rotary drilling equipment. Moreover, it resists to corrosion from hydrogen sulfide and delivers water, oil, mud and other high pressure media in borehole operation in oil field. Construction it made of inner sub or stainless steel armor inner tube, carbon fiber reinforce sub, middle sub, steel wire reinforce sub steel catenarian line reinforce sub, and carbon fiber outer sub. The product is classified into steel wire reinforcing type and steel link line reinforcing type. Applicable standard API Spec 7K SYT5469 API emblem practical license Numbers 7K 0082
Cutting Hose Pipe
Hydraulic hose SAE SAE J517 100R1AT SAE J517 100R1A SAE J517 100R2AT SAE J517 100R2A SAE J517 100R3 SAE J517 100R4 SAE J517 100R5 SAE J517 100R6 SAE J517 100R9AT SAE J517 100R12/EN 856R12 SAE J517 100R13 SAE J517 100R16 SAE J517 100R17 DIN/EN DIN 20022 1SN/EN 853 1SN DIN 20022 2SN/EN 853 2SN DIN 20022 1ST/EN 853 1ST DIN 20022 2ST/EN 853 2ST DIN 20022 1SC/EN 857 1SC DIN 20022 2SC/EN 857 2SC DIN 20023 4SP/EN 856 4SP DIN 20023 4SH/EN 856 4SH Assembly High Pressure Washer Hose/Assembly
Characteristics: flexible; abrasion, aging, oil, weather, ozone resistance Working temperature: -20 TO 120 ¡æ Delivery cycle: As your order(2000 meters per day). Type of shipping: Tianjin port or Qingdao port. Safety factor: 1:3 Notes: Not bend over bending diameter ,not squeeze over, Avoid colliding flange surface. Technical parameters: Hose lining: NBR Reinforcement layer: tire cord with helix wire Cover rubber layer: CR and NBR blend Packaging Details: plastic stripe in rolls or as the requirement(flexible radiator hose ) Delivery Detail: a 20ft container in 1 week
Application:Delivering industrial compressed air, has a wide range service in industry manufacture, mining , construction project and air tools. Characteristics: flexible, aging-resistance, ozone resistance Working temperature: -20 TO 80 ¡æ Delivery cycle: As your order(2000 meters per day). Type of shipping: Tianjin port or Qingdao port. Safety factor: 1:3 Notes: Not bend over bending diameter ,not squeeze over, Avoid colliding flange surface. Technical parameters: Hose lining: SBR Reinforcement layer: tire cord with helix wire Cover rubber layer: SBR and CR blend Packaging Details: plastic stripe in rolls or as the requirement(flexible radiator hose ) Delivery Detail: a 20ft container in 1 week
Rotary Drilling/Vibrator Hose Tube: NBR, specially compounded for handling abrasive, corrosive and oily drilling mud Reinforcement: Multiple layers of polyester cord over tube, high tensile steel cables. Cover: NBR, Specially compounded, resistant to abrasion, corrosion, cutting, gouging, oil and weather. Application: Flexible Connection between standpipe and swivel(Rotary Drilling) or between pump and standpipe(Rotary Vibrator) for pumping mud at extra high pressure in oil drilling and exploration work. Fitting: Hammer Unions, API Male End, Flanges Attachment: Safety Clamp & Chain Applicable Standard: API Spec 7k/ISO14693
Hydraulic hose R1/R2 in long lenght of all sizes from 5/16'' to 2 '' Hydraulic hose With fittings according to various needs BSP/ORS/UNF etc in all sizes . As per SAE standards
Applications: Common water and draining Suction and discharge for sand, gravel, cement and iron etc. Construction, civil engineering, agricultural and ships Transfer of powder and granule Suction and press-transfer of various grains Characteristic: Light weight and flexible Smooth tube and excellent water supply and draining efficiency High abrasion resistance and easy to transfer power Service Temperature Range: -5C to 65C
