Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor
Supplier: Base oil sn60, 70, 100, 150, 350, 400, 500, 550, 600, 650; jet fuel a1, jp54, crude oil, bitumen 50,60/70, 90/100 & all grades of bitumen, used cooking oil, transformer oil, industrial oil, all types of grease, lng/lpg, used motor or engine oil, all types of motor oil, lubricants, additives and types of petroleum products
EQUINAS NBO 60u High Quality Naphthenic Base Oil EQUINAS NBO 60u is a high-quality Naphthenic Base Oil with very good dielectric properties and oxidation stability intended for transformers, switchgears, and other electrical equipment. Naphthenic base oil is a type of mineral oil that is produced through the refining of crude oil. It is characterized by its composition of saturated cyclic hydrocarbons called naphthene. Applications: Naphthenic base oils are used in a wide range of applications, including automotive lubricants, transformer oils, metalworking fluids, rubber and tire manufacturing, and more. They are particularly well-suited for use in applications where low-temperature performance is critical, such as in hydraulic fluids, refrigeration oils, and compressor lubricants Features and Benefits: Low-temperature fluidity: Naphthenic base oil has a low pour point and excellent low-temperature fluidity, making it suitable for use in cold environments. Good solvency: Naphthenic base oil has good solvency, which allows it to dissolve additives and other chemicals that are added to lubricants and other products. Good oxidative stability: Naphthenic base oil has good oxidative stability, which means it can resist degradation caused by exposure to oxygen. Thermal stability: Naphthenic base oil can withstand high temperatures without breaking down or forming deposits. Compatibility: Naphthenic base oil is compatible with a wide range of other materials, including elastomers, seals, and metals. Environmental advantages: Naphthenic base oil is a naturally occurring substance, and its production process generates fewer harmful emissions and waste products than some other types of base oils. Packages size: Available in drums and flexibags Health and Safety: Based on available information, this product is not expected to produce adverse effects on health when used for applications referred to above and the recommendations provided in the Safety Data Sheet (SDS) are followed. The SDS is available upon request through our sales contact office. This product should not be used for purpose other than the applications referred to above. If disposing of used product, take care to protect the environment, follow the local rules and regulations of your local Authority.
EQUINAS NBO 60u is a high-quality Naphthenic Base Oil with very good dielectric properties and oxidation stability intended for transformers, switchgears, and other electrical equipment. Naphthenic base oil is a type of mineral oil that is produced through the refining of crude oil. It characterized by its composition of saturated cyclic hydrocarbons called naphthene. Naphthenic base oils are used in a wide range of applications, including automotive lubricants, transformer oils, metalworking fluids, rubber and tire manufacturing, and more. They are particularly well-suited for use in applications where low-temperature performance is critical, such as in hydraulic fluids, refrigeration oils, and compressor lubricants
MOBILGEAR 600 XP 220 Gear Oil Mobilgear 600 XP 220 Descriptions MOBILGEAR 600 XP 220 is extra high performance gear oil that has outstanding extreme pressure characteristics and load-carrying properties, intended for use in all types of enclosed gear drives with circulation or splash lubrication systems. MOBILGEAR 600 XP 220 is designed to stay ahead of the changing needs of gearbox technology. Gearbox technology design trends are towards smaller units with similar power throughout. This increase in power density places increased demands on gear oils. MOBILGEAR 600 XP 220 is formulated to meet the stress by providing extra protection for gears.
PAO 4 - 10 CST Product Uses: The 4-10 CST PAOs are used as synthetic base fluids for high-performance industrial and automotive lubricants (e.g., gear oils, compressor oils, hydraulic fluids, greases, engine oils) and functional fluids (e.g., dielectric, heat transfer, drilling). Almost all products go into lubricant applications.
Exxon S-150 - a liquid solvent used in many industrial applications such as fuel additives, paints and coatings, pesticide formulations, industrial cleaning, and process fluids. Size: 55 Gallons
BASE Oil-SN 60, 70, 150, 300, 500, 600, 650 & BS 150.
Used Engine Oil
