ealing with the origianal moldel, take some liquid silicone rubber, add 2%~3% cuing agent of the amount of silicon and mix them evenly.
Then after vacuum-pumping the mixture, you cn pour it into the mold frame. The sillicone mold will cured in 2~3 hours.
Note: the time for vacuum-pumping should be less than 3-5mins, othewise, once the silicone rubber has cross-link
, high-temperature, acid and alkali and expansion, comfortable duplication times and free sample avalibale.
Molding silicone rubber operations:
mould silicone rubber is a kind of flowing liquid, and it consists of two component, part A is aflowable liquid silicone rubber, part B is the curing agent.
Firstly, after your previous work of dealing with the origianal moldel, take some liquid silicone rubber, add 2%~3% cuing agent of the amount of silicon and mix them evenly.
Then after vacuum-pumping the mixture, you cn pour it into the mold frame. The sillicone mold will cured in 2~3 hours.
Note: the time for vacuum-pumping should be less than 3-5mins, othewise, once the silicone rubber has cross-link reaction during vacuumizing. it will not be operated.
Liquid silicone rubber for gypsum features
Liquid silicone rubber is two part silicone with general hardness of 22-50a¡ãafter curing with features ------
High tensile & tear strength
High duplication times
Low linear shrinkage
Resistance to high-temperature
Low shrinkage and non-deformation
Resistance to acid-alkali and expansion
Liquid silicone rubber for gypsum operation instructions
Step one: take 100g of part a and add 2g of part b and mix the silicone rubber and curing agent evenly.
Step two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: the time for vacuum-pumping should be less than 3¡ª5 minutes , otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step three: pouring the mixture into the frame with original gypsum mold slowly .
Shelf life for liquid silicone rubber
10~12months, when stored in a dry & cool place under the room temperature 25.
Specifications of silicone potting :
Two parts silicone , applicable to sealing , bonding, coating for electronic parts.
n be used for a long time under the temperature of -60c ~200 c with the characteristic of moisture-proof and waterproof, radiation-proof as well as weatherable and anti-ageing.
2. No significant exothermal or shrinkage during curing.
3. Very stable to changes of temperature, stability over wide temperature range (-50 to 200 oc).
For getting further information about silicone rubber for potting, pls contact with miss sara
Ferro silicon Specs: Si:75%min. and Si:72%min. C:0.2%max. S:0.02%max. P:0.04%max. Al:2.0%max.1.5%max.and 1.0%max .Commodity: Ferro Silicon Low Al Specs: Si:75%min. C:0.2%max. S:0.02%max. P:0.04%max.Al:0.1%max.0.3%max.and0.5%max. In 1mt plastic woven bags.
Ferro Silicon Ferro Silicon has a melting point of 1200�¯�¿�½?�?�°C to 1250�¯�¿�½?�?�°C with a boiling point of 2355�¯�¿�½?�?�°C and Ferro Silicon contains about 2% of calcium and alluminium. Ferro Silicon, as an additive to the production process of ferrous metals, will impart several desirable properties upon the resultant alloy. Some of the primary benefits of adding Ferro Silicon to an alloy is to improve the corrosion resistant properties of the new compound, as well as to add to the high temperature heat- resistance properties of the new alloy, for example, in the production of silicon steel for use in transformer cores.
FerroChrome is a kind of Ferro alloy which is formed by Ferro and Chrome,it is an important alloy addition in steel making. Ferrochrome (Fe Cr) is an alloy of chromium and containing between 50% and 70% chromium.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
Ferrosilicon� is an alloy of iron and silicon that is made by reducing silica in the presence of iron, and which plays an essential role in steelmaking.
Silicon iron, also known as ferrosilicon, is a ferroalloy composed of iron and silicon, with a silicon content ranging from 15% to 90%. It is commonly used as a deoxidizer in steelmaking and as a reducing agent in ferroalloy production and the chemical industry. In the steelmaking industry, approximately 3-5 kg of 75% ferrosilicon is consumed to produce one ton of steel. Ferrosilicon can also be used as an alloying element additive, which is widely used in low alloy structural steel, spring steel, bearing steel, heat-resistant steel, and electrical silicon steel.
Ferrosilicon is also used in the production of cast iron, as it helps to control the initial content of silicon in the melt, which is important for the microstructure and properties of the final product. Ferrosilicon cast magnesium is an alloy that contains magnesium and is used as a nodulizer in the production of ductile iron. It has a big mechanical strength, and the effect of deoxidization and desulfurization is strong. Modifiers are added to molten metal to change its properties, and ferrosilicon is one of the most commonly used modifiers in the production of cast iron. The material forming the base Ferrosilicon analysis ferrosilico cast magnesium and modifiers.
The role of Ferrosilicon in Steelmaking:
In steelmaking, Ferrosilicon is used for:
