Specifications of silicone potting :
Two parts silicone , applicable to sealing , bonding, coating for electronic parts.
n be used for a long time under the temperature of -60c ~200 c with the characteristic of moisture-proof and waterproof, radiation-proof as well as weatherable and anti-ageing.
2. No significant exothermal or shrinkage during curing.
3. Very stable to changes of temperature, stability over wide temperature range (-50 to 200 oc).
For getting further information about silicone rubber for potting, pls contact with miss sara
Description HY-9045 is a kind of low viscosity, Inherent flame resistance, two components addtion cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. Application HY-9045 is suitable for bonded seal of electronic components, power module and control module, LED invertor potting, etc which requires waterproof and insulation. It can be broadly used for LED screen, Wind Power Generator, PCB, substrate, etc.
25 Dielectric permittivity(1.2mhz) 3.0~3.3 Volume resistivity(cm) 1.01016 Fire resistance 94-v1 (pls note all data of pcb electronic potting silicone rubber with black color above is in 25c with 55% humidity conditions. We don't guarantee a same date if testing under different conditions, or when data was regenerated). Warm tips for for pcb electronic potting silicone 1. Sealing package for storage. The mixture should be used up at once to avoid wasting. 2. Silicone belongs to non-dangerous goods, but keep away form mouth and eyes. 3. When it gets stratified after a period of storage, please mix hy-210# evenly before using, It does not affect the performance. Shelf life and transportation 1. Twelve(12) months when stored at 25c in original unopened packages. 2. This is a non-dangerous product, it can be transported as general chemicals. 3. Products exceed the storage life should be confirmed normal before using. Technical guidelines 1. Pls put part a and b in separate container and stir evenly before mixing the two Parts together. 2. Mixing ratio part a:part b is 10:1 3. Bubble release if necessary, deaeration the mixture under 0.08 mpa for 3 minutes. 4. Hy-215# is cured at room temperature, so pls put it under room temperature after Pouring. It comes to next process when basically cured, and it takes about 24 hours For completely cured. 25kg/drum or 200kg/drum
Supplier: Silicone rubber, rtv silicone rubber, addition silicone rubber, electronic potting silicone, life casting silicone rubber, trademark silicone rubber, lsr, textile coating silione rubber, rtv-2 silicone rubber, liquid silicone rubber, silicone rubber material
Supplier: Rtv 2 molding silicone, addition silicone, pad printing silicone rubber, life casting silicone, electronic potting silicone rubber, fda silicone, silicon oil, manual mold silicone, lsr, trademark silicone rubber, textile coating silicone rubber, liquid silicone rubber
Services: By air, by sea
Supplier: Molding siliocone rubber, pad printing silicone, platinum cure silicone, lifecasting silicone, electronic potting silicone, foaming silcione rubber
Services: Transportation, shipping
Supplier: Rtv 2 molding silicone, addition silicone, pad printing silicone rubber, life casting silicone, electronic potting silicone rubber, fda silicone, silicon oil, manual mold silicone, lsr, trademark silicone rubber, textile coating silicone rubber, liquid silicone rubber
Supplier: RTV-2 silicone rubber, silicon, silicone rubber, RTV silicone rubber, liquid silicone rubber, condensation silicone rubber, silicone rubber for mold making, silicone rubber for manaul mold making, silicone rubber for pad printing, silicone rubber for potting compound, platinum cure silicone, addition cure silicone rubber
Buyer: RTV-2 silicone rubber, silicon, silicone rubber, RTV silicone rubber, liquid silicone rubber, condensation silicone rubber, silicone rubber for mold making, silicone rubber for manaul mold making, silicone rubber for pad printing, silicone rubber for potting compound, platinum cure silicone, addition cure silicone rubber
Supplier: RTV-2 molding silicon, addition silicon, pad printing silicone rubber, life casting silicone, electronic potting silicone rubber, FDA silicone, silicon oil, manual mold silicone, LSR, trademark silicone rubber, textile coating silicon rubber, liquid silicon rubber
Supplier: RTV-2 molding silicone, addition silicone, pad printing silicone rubber, life casting silicone, electronic potting silicone rubber, FDA silicone, silicon oil, manual mold silicone, LSR, trademark silicone rubber, textile coating silicone rubber, liquid silicone rubber
