Slit and wedge bolt is composed by rod , wedge, plate, nut and so on , have good bearing capacity for roof support
How to work
Slit wedge rock bolt has five parts : wedge, rod, plate, spherical washer and nut .One end of high strength of rod has a cross slit , swedge can be inserted in , the other end has thread for hold plate , washer , and nut . After drilling the borehole , insert swedge into slit and install other accessories , push the whole rock bolt into the end of borehole, drive external end hard so that wedge can expand cross slit , causing large pressure between interior end and strata . The bolt can be used with cement paste or cement plaster for permanent support .
Feature
(1) Large bearing capacity for roof support
(2) Simple structure and easy installation
(3) When used for permanent support , should be with cement paste or cement plaster
(4) Spherical washer provides up to 180 angle of tilt, ;user friendly rounded corners
Split sets rock bolt is used together with dome plate and net for reliable ground support in mines, tunnels, slopes, or wherever .
1.Features :
(1)split sets bolt is made from high strength steel tube that is a slotted steel tube, with one end tapered tip for easy insertion into a drill hole. The other end has a welded ring for holding the bearing plate. A ring, or collar, is welded on the outer end to hold a domed plate to the rock surface.
(2)the bolt is inserted into a hole slightly , the diameter of hole is smaller than the tube. When drive the rock bolt into the hole, the tube of bolt is compressed and the slot is partially closed , that make the strata and the bolt be a whole body, .All strain of bolt wiill support to the strata tightly. When surrounding rock is shaked by explosion, anchor capacity increasesed higher and supporting effect is perfect.
(3) fast and easy installation with hand held or mechanized equipment .
(4) be used in a variety of ground conditions for immediate ground support, but is not suitable for very soft strata and permanent support.
(5) provide support in radial and axial direction .
2. Recommended hole diameter calculation:
(1) in the rock stratum : a diameter of hole: (0.9-0.95) diameter of bolt
All threadbar bolt is used together with dome plate and net for reliable ground support in mines, tunnels, slopes, or wherever.
1.Features :
(1) in the longitudinal direcition , rock body has equal tensile strength , that is about 40% higher than the reverse-twist bolt in the same specification .
(2) extend the support area , not only be used by end anchoring , but also be used by fully anchoring , that has a better support efficiency .A
(3)low price, widely used in coal mines, railways, hydropower and other types of roadway projects.
Thread bar bolt is composed of screw thread steel bar , high strength plate , casting damping nut , yield tube, washer , and other accessories . According to the structure of steel bar , the bolt has two stypes : rib rebar bolt and non-rib rebar bolt .
The bolt is usually used in thick coal seam , that has high stress, large deformation, difficult to support and other poor environment .
Feature :
(1) The bolts have high strength stress , good support capacity can prevent the roof from sinking down , and the strata sliding .
(2) Fast and easy installation by mechanized tools.
(3) Be used with resin anchoring cartridge for permanent support .
(4) Be used in high stressed , large deformed area .
(5) Low price, widely used in coal mines, railways, hydropower and other types of roadway projects.
(6)thread profile has higher strength than rod and offers excellent mixing capabilities in resins installation
Thread bar bolt is composed of screw thread steel bar , high strength plate , casting damping nut , yield tube, washer , and other accessories . According to the structure of steel bar , the bolt has two stypes : rib rebar bolt and non-rib rebar bolt .
The bolt is usually used in thick coal seam , that has high stress, large deformation, difficult to support and other poor environment .
Feature :
(1) the bolts have high strength stress , good support capacity can prevent the roof from sinking down , and the strata sliding .
(2) fast and easy installation by mechanized tools.
(3) be used with resin anchoring cartridge for permanent support .
(4) be used in high stressed , large deformed area .
(5) low price, widely used in coal mines, railways, hydropower and other types of roadway projects.
(6)thread profile has higher strength than rod and offers excellent mixing capabilities in resins installation
