Zcq series self priming type magnet pump is the magnet pump with 4meter self priming height but it need not install foot valve and pour guide water. Rotary ring replaces stationary ring so that parts which contact with liquids are entirely sealed and no leak. Pump body and parts which contacts with liquids are stainless steel and ceramic and teflon etc material to insure the good anticorrosion performance Plywood case
Magnetic self-priming pump MVKD series Motor Model:MVKD-Magnetic self-priming pump Materical:PP Power:5hp Pole:2P Bearing:Silicon Spindle:Ceramic Rubber:EPDM Frequency:50HZ Caliber:2"X2" Max.capacity:485l/min Max.head:25.0m Weight:71.0kg
Product Name - TULLU TOP 1.5 H.P. AC-170 SP Product Description - Monoblock Self Priming Pump Price of product ( USD price or FOB price) -prices will be quoted directly to the clients upon enquiry. Product origin - Varanasi, Uttar Pradesh, India Key Specifications/Special Features - 1. Copper Winding. 2. Benchmark in head and water discharge at 170 feet. 3. Full Cast Iron Body, Pump Unit and Covers for Sturdiness and Longer life. 4. Fitted with Thermal Overload Protector (T.O.P.). 5.Easy in Handling. 6. Faster Self-Priming Minimum Order Size and Packaing details - 20 feet container
Product Name - TULLU TOP 1.0 H.P. AC-150 SP Product Description - Monoblock Self Priming Pump Price of product ( USD price or FOB price) -prices will be quoted directly to the clients upon enquiry. Product origin - Varanasi, Uttar Pradesh, India Key Specifications/Special Features - 1. Copper Winding. 2. Huge head and water discharge at 150 feet. 3. Full Cast Iron Body, Pump Unit and Covers for Sturdiness and Longer life. 4. Fitted with Thermal Overload Protector (T.O.P.). 5. Easy in Handling. 6. Faster Self-Priming Minimum Order Size and Packaging details - 20 feet container
Product Name - TULLU TOP Virat 1 H.P. Product Description - Monoblock Self Priming Pump Price of product ( USD price or FOB price) -prices will be quoted directly to the clients upon enquiry. Product origin - Varanasi, Uttar Pradesh, India Key Specifications/Special Features - 1. Copper Winding. 2. Huge discharge 600 L.P.H. at 125 feet. 3. Fitted with Thermal Overload Protector (T.O.P.). 4. Easy in Handling. 5. Faster Self-Priming. 6. Cast Iron Pump Unit and Covers in Aluminium Body for Sturdiness and Longer life. 7. Super Low Voltage Performance (Lifts Water even at 150 Volts). Minimum Order Size and Packaging details - 20 feet container
Product Name - TULLU TOP AC-70 S.P. 0.25 H.P. Product Description - Monoblock Self Priming Pump Price of product ( USD price or FOB price) -prices will be quoted directly to the clients upon enquiry. Product origin - Varanasi, Uttar Pradesh, India Key Specifications/Special Features - 1. Copper Winding. 2. Fitted with Thermal Overload Protector (T.O.P.). 3. Easy in Handling. 4. Faster Self-Priming. 5. Cast Iron Pump Unit and Covers in Aluminium Body for Sturdiness and Longer life. 6. Super Low Voltage Performance (Lifts Water even at 150 Volts). Minimum Order Size and Packaging details - 20 feet container
Product Name - TULLU TOP AC-110 S.P. 0.5 H.P. Product Description - Monoblock Self Priming Pump Price of product ( USD price or FOB price) -prices will be quoted directly to the clients upon enquiry. Product origin - Varanasi, Uttar Pradesh, India Key Specifications/Special Features - 1. Copper Winding. 2. Huge discharge 1000 L.P.H. at 110 feet. 3. Fitted with Thermal Overload Protector (T.O.P.). 4. Easy in Handling. 5. Faster Self-Priming. 6. Cast Iron Pump Unit and Covers in Aluminium Body for Sturdiness and Longer life. 7. Super Low Voltage Performance (Lifts Water even at 150 Volts). Minimum Order Size and Packaging details - 20 feet container
We Manufacture REGENRATIVE SELF PRIMING PUMPS From 0.50H.P To 1.5H.P
MX Self Priming Pump Size (discharge): 25mm to 450mm Capacity: 3.4~ 1200 m3/hr Suction lift: Max. 6.5m Head: 6m ~ 135 m Efficiency:Up to 92% Materials:Cast iron,SS 304,SS 316,Bronze etc MX Self Priming Pump Introduction: MX Self priming pump made by our company is developed after our digestion, assimilation and improvement of domestic and foreign relevant technical data, which is a energy-saving kind of pump production. The pump is a kind of self-suction centrifugal pump, which has the advantages of compact structure, convenient operation, steady running, easy maintenance, high efficiency, long life, strong self-suction ability and so on. It doesn't need a foot valve on the pipeline, and just need to ensure that there is quantificational inducting oil stored in the pump case before work, so as to simplify the pipeline system and improve the working condition. MX Self Priming Pump Features: 1. Beautiful shape and fine structure,reliable performance. 2. With strong capacity of self priming, no need to equip with flap valve. 3. Non-clog, and with powerful capacity of passing big solid.. 4. Convenient for maintenance. MX Self Priming Pump Parameter Selection Table: MX Self Priming Pump Application: It is used in environment protection,construction,fire protection,chemical industry,phamary,printing and dyestuff,brewage,elctric power,electroplate,papermaking,petrol,washing for industry and mine,cool for device,etc. It is suitable for clear water,sea water and chemical medium with acid and alkali and mushy slurry(viscosity100 centipois),consistency for solid can not exceed 30% of total medium. When it's mounted with an arm sprayer, it can jet the water into the air to disperse into little raindrops for spraying, so it is a good tool for farm, nursery, orchard and tea garden. It is the ideal supporting pump for transfer slurry to filter press, it could matching with filter press of different specs and models.
Self Priming pumps are self priming centrifugal pumps , the dual seals of the pump consists of mechnical seals and sketleton seals, the pump is compact in constructure, fine in performance , convenient in maintain and saving about 50% water compare to furrow irrigation. 1. The trans medium's temperature to pump shouldn't be higher than 40degree; 2. Trans medium's pH VALUE: 6~8; 3. The grain diameter of the solids in the water is no bigger than 0.2mm 4. Single-phase pump 5. Self-priming pump, with high aborption and high lift-head 6. Brass impeller 7. Adopt skeleton-type oil sealing or mechanical sealing. 8. Based on general self-priming pump, automatic function is added and the pump can be applied to hot water.
Forged Brass Impeller Internally mounted mechanical seal Low power Consumption Fitted with terminal block Light in Weight-Portable Compact Mechanical design Better Aesthetics and Finish Operating Conditions Clean water not containing abrasive particles Liquid temperature up to 60¦ C Ambient temperature up to 40¦ C Total suction lift up to 6 Meters Motor 2-Pole, Single phase, 50 Hz, 220-240 V with thermal overload protector Capacitor inside/outside the terminal box Insulation class B Protection IP 51
Forged Brass Impeller Internally mounted mechanical seal Low power Consumption Fitted with terminal block Light in Weight-Portable Compact Mechanical design Better Aesthetics and Finish Operating Conditions Clean water not containing abrasive particles Liquid temperature up to 60¦ C Ambient temperature up to 40¦ C Total suction lift up to 6 Meters Motor 2-Pole, Single phase, 50 Hz, 220-240 V with thermal overload protector Capacitor inside/outside the terminal box Insulation class B Protection IP 51
Jet self priming pump Applications and features: Jet cast iron self-priming pumps combine the functional advantages of centrifugal pumps with the practical advantages of self-priming ones. With easy for assembling and using, compact Construction, small and easy for moving, high efficiency, saving energy, no channel water before using etc. Features, it is widely used in industrial and mining enterprise, high building, washing, garden irrigation and fountains etc. Operating conditions: Type of liquid:clean water with no suspended solids or abrasive material Maximum liquid temperature_50¦ Maximum suction height_10m Maximum working pressure_10bar Performance range Flow rate up to 60 l/min.(3.6m3/h) (head up to 45m Operating limits (suction lift up to 10m (fluid temperature up to 60pc (maximum ambient temperature 40pc Carton
Self Priming Pumps (Sharp Type)
Self Priming Pumps (V-Type) MATERIAL OF CONSTRUCTION: Shaft : S.S. 410, Motor Body : Aluminium / Cast Iron, Impeller : Brass, Casting Parts : Graded Casting, TECHNICAL DETAILS: Head Range : Up To 36 mtrs, Discharge Range : Up To 50 lpm, Delivery : 25 X 25mm, Power Rating : 0.5 H.P., Voltage Range : 180 V TO 240 V (1-Phase). SALIENT FEATURES: Easy To Install, Highly Efficient, Law Power Consumption, Use Graded Varnish To Reduce Corrosion In Stator, Noiseless & vibration free motors, All Parts Machined On CNC Machine Only
ASP2010 series self-priming sewage pump is a new production which is developed according to the latest technology home and broad.Pump has single stage,single suction,horizontal,gas-liquid mixed type. Performance Range Discharge diameter: 300mm Capacity: 130 to 210 to 250 m3/h Head: 29 to 27 to 23m Speed: 1480r/min Motor power: 30kW Max.solid particle: less than 85mm Specific gravity: less than 1.0~1.3
Self Priming Monoblock Pumps
Fzb series fluorine plastic linning self-priming pump Patent product, base on ihf centrifugal pump structure, installed the double volute self-priming pump casing on ihf pump, simple structure and for widely usage. Corrosion and pressure resistance, wet parts are made of corrosion resistant fluoroplastic, with these advantages, fzb pumps available to high corrosive applications. Pump base plate is made of metal; make the pump available to high pressure resistance applications. Easy for operating Developed for low sump application, pump installed above the sump or tank, which easy for operating, maintenance and repair. Min model no 25fzb 18l pumping flow capacity 3.6 m3/h, 18 meter pump head , equipped with motor power 2.2kw Max model no 100fzb 30l pumping flow capacity 100 m3/h , 30 meter pump head, equipped with motor power 18.5kw Model no 50fzb -30l 50 pump inlet diameter are 50mm Fzb single stage end-suction centrifugal pump 30 pump head 30 meter L pump connection by coupling Pump flow capacity 12 m3/h Motor 4kw Self-priming height 3 meter . Medium Acids & lyes Waste water Chlorine water Electrolyte Application Chemical industry Pesticide Acid and alkali making Papermaking Acid pickle process Electronics industry
Self Priming Coolant Pump
Detailed product description Model: qjx series Flow rate: 80-600 m3/h (22.2-166.7l/s) Head: 20 to 210 m (65.6 to 688.9 feet) Max. Rotate speed: 3000 r/min Pump outlet dia.: 360mm, 450mm, 505mm Ph value: 6.5-8.5 Operating limits: 1, maximum ambient temperature: 20 deg c 2, maximum immerging depth for the first stage: 500mm (19.7 inch) 3, maximum hydrogen sulfide component: 1.5mg/l 4, maximum chloride ion: 400mg/l. Motor: 1. Rewindable motor 2. Voltage: 380v 3. Frequency: 50hz 4. Max. Power: 220kw Materials: cast iron, stainless steel Application: * applied to getting water from the river and lake, water supply and drainage for mine, the foundation and In wooden box or as your request.
